<!-- doc/src/sgml/bloom.sgml -->

<sect1 id="bloom" xreflabel="bloom">
 <title>bloom</title>

 <indexterm zone="bloom">
  <primary>bloom</primary>
 </indexterm>

 <para>
  <literal>bloom</literal> provides an index access method based on
  <ulink url="https://en.wikipedia.org/wiki/Bloom_filter">Bloom filters</ulink>.
 </para>

 <para>
  A Bloom filter is a space-efficient data structure that is used to test
  whether an element is a member of a set.  In the case of an index access
  method, it allows fast exclusion of non-matching tuples via signatures
  whose size is determined at index creation.
 </para>

 <para>
  A signature is a lossy representation of the indexed attribute(s), and as
  such is prone to reporting false positives; that is, it may be reported
  that an element is in the set, when it is not.  So index search results
  must always be rechecked using the actual attribute values from the heap
  entry.  Larger signatures reduce the odds of a false positive and thus
  reduce the number of useless heap visits, but of course also make the index
  larger and hence slower to scan.
 </para>

 <para>
  This type of index is most useful when a table has many attributes and
  queries test arbitrary combinations of them.  A traditional btree index is
  faster than a bloom index, but it can require many btree indexes to support
  all possible queries where one needs only a single bloom index.  Note
  however that bloom indexes only support equality queries, whereas btree
  indexes can also perform inequality and range searches.
 </para>

 <sect2>
  <title>Parameters</title>

  <para>
   A <literal>bloom</literal> index accepts the following parameters in its
   <literal>WITH</literal> clause:
  </para>

   <variablelist>
   <varlistentry>
    <term><literal>length</literal></term>
    <listitem>
     <para>
      Length of each signature (index entry) in bits. It is rounded up to the
      nearest multiple of <literal>16</literal>. The default is
      <literal>80</literal> bits and the maximum is <literal>4096</literal>.
     </para>
    </listitem>
   </varlistentry>
   </variablelist>
   <variablelist>
   <varlistentry>
    <term><literal>col1 &mdash; col32</literal></term>
    <listitem>
     <para>
      Number of bits generated for each index column. Each parameter's name
      refers to the number of the index column that it controls.  The default
      is <literal>2</literal> bits and the maximum is <literal>4095</literal>.
      Parameters for index columns not actually used are ignored.
     </para>
    </listitem>
   </varlistentry>
   </variablelist>
 </sect2>

 <sect2>
  <title>Examples</title>

  <para>
   This is an example of creating a bloom index:
  </para>

<programlisting>
CREATE INDEX bloomidx ON tbloom USING bloom (i1,i2,i3)
       WITH (length=80, col1=2, col2=2, col3=4);
</programlisting>

  <para>
   The index is created with a signature length of 80 bits, with attributes
   i1 and i2 mapped to 2 bits, and attribute i3 mapped to 4 bits.  We could
   have omitted the <literal>length</literal>, <literal>col1</literal>,
   and <literal>col2</literal> specifications since those have the default values.
  </para>

  <para>
   Here is a more complete example of bloom index definition and usage, as
   well as a comparison with equivalent btree indexes.  The bloom index is
   considerably smaller than the btree index, and can perform better.
  </para>

<programlisting>
=# CREATE TABLE tbloom AS
   SELECT
     (random() * 1000000)::int as i1,
     (random() * 1000000)::int as i2,
     (random() * 1000000)::int as i3,
     (random() * 1000000)::int as i4,
     (random() * 1000000)::int as i5,
     (random() * 1000000)::int as i6
   FROM
  generate_series(1,10000000);
SELECT 10000000
=# CREATE INDEX bloomidx ON tbloom USING bloom (i1, i2, i3, i4, i5, i6);
CREATE INDEX
=# SELECT pg_size_pretty(pg_relation_size('bloomidx'));
 pg_size_pretty
----------------
 153 MB
(1 row)
=# CREATE index btreeidx ON tbloom (i1, i2, i3, i4, i5, i6);
CREATE INDEX
=# SELECT pg_size_pretty(pg_relation_size('btreeidx'));
 pg_size_pretty
----------------
 387 MB
(1 row)
</programlisting>

  <para>
   A sequential scan over this large table takes a long time:
<programlisting>
=# EXPLAIN ANALYZE SELECT * FROM tbloom WHERE i2 = 898732 AND i5 = 123451;
                                                 QUERY PLAN
------------------------------------------------------------------------------------------------------------
 Seq Scan on tbloom  (cost=0.00..213694.08 rows=1 width=24) (actual time=1445.438..1445.438 rows=0 loops=1)
   Filter: ((i2 = 898732) AND (i5 = 123451))
   Rows Removed by Filter: 10000000
 Planning time: 0.177 ms
 Execution time: 1445.473 ms
(5 rows)
</programlisting>
  </para>

  <para>
   So the planner will usually select an index scan if possible.
   With a btree index, we get results like this:
<programlisting>
=# EXPLAIN ANALYZE SELECT * FROM tbloom WHERE i2 = 898732 AND i5 = 123451;
                                                           QUERY PLAN
--------------------------------------------------------------------------------------------------------------------------------
 Index Only Scan using btreeidx on tbloom  (cost=0.56..298311.96 rows=1 width=24) (actual time=445.709..445.709 rows=0 loops=1)
   Index Cond: ((i2 = 898732) AND (i5 = 123451))
   Heap Fetches: 0
 Planning time: 0.193 ms
 Execution time: 445.770 ms
(5 rows)
</programlisting>
  </para>

  <para>
   Bloom is better than btree in handling this type of search:
<programlisting>
=# EXPLAIN ANALYZE SELECT * FROM tbloom WHERE i2 = 898732 AND i5 = 123451;
                                                        QUERY PLAN
---------------------------------------------------------------------------------------------------------------------------
 Bitmap Heap Scan on tbloom  (cost=178435.39..178439.41 rows=1 width=24) (actual time=76.698..76.698 rows=0 loops=1)
   Recheck Cond: ((i2 = 898732) AND (i5 = 123451))
   Rows Removed by Index Recheck: 2439
   Heap Blocks: exact=2408
   -&gt;  Bitmap Index Scan on bloomidx  (cost=0.00..178435.39 rows=1 width=0) (actual time=72.455..72.455 rows=2439 loops=1)
         Index Cond: ((i2 = 898732) AND (i5 = 123451))
 Planning time: 0.475 ms
 Execution time: 76.778 ms
(8 rows)
</programlisting>
   Note the relatively large number of false positives: 2439 rows were
   selected to be visited in the heap, but none actually matched the
   query.  We could reduce that by specifying a larger signature length.
   In this example, creating the index with <literal>length=200</literal>
   reduced the number of false positives to 55; but it doubled the index size
   (to 306 MB) and ended up being slower for this query (125 ms overall).
  </para>

  <para>
   Now, the main problem with the btree search is that btree is inefficient
   when the search conditions do not constrain the leading index column(s).
   A better strategy for btree is to create a separate index on each column.
   Then the planner will choose something like this:
<programlisting>
=# EXPLAIN ANALYZE SELECT * FROM tbloom WHERE i2 = 898732 AND i5 = 123451;
                                                          QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------
 Bitmap Heap Scan on tbloom  (cost=9.29..13.30 rows=1 width=24) (actual time=0.148..0.148 rows=0 loops=1)
   Recheck Cond: ((i5 = 123451) AND (i2 = 898732))
   -&gt;  BitmapAnd  (cost=9.29..9.29 rows=1 width=0) (actual time=0.145..0.145 rows=0 loops=1)
         -&gt;  Bitmap Index Scan on tbloom_i5_idx  (cost=0.00..4.52 rows=11 width=0) (actual time=0.089..0.089 rows=10 loops=1)
               Index Cond: (i5 = 123451)
         -&gt;  Bitmap Index Scan on tbloom_i2_idx  (cost=0.00..4.52 rows=11 width=0) (actual time=0.048..0.048 rows=8 loops=1)
               Index Cond: (i2 = 898732)
 Planning time: 2.049 ms
 Execution time: 0.280 ms
(9 rows)
</programlisting>
   Although this query runs much faster than with either of the single
   indexes, we pay a large penalty in index size.  Each of the single-column
   btree indexes occupies 214 MB, so the total space needed is over 1.2GB,
   more than 8 times the space used by the bloom index.
  </para>
 </sect2>

 <sect2>
  <title>Operator Class Interface</title>

  <para>
   An operator class for bloom indexes requires only a hash function for the
   indexed data type and an equality operator for searching. This example
   shows the operator class definition for the <type>text</type> data type:
  </para>

<programlisting>
CREATE OPERATOR CLASS text_ops
DEFAULT FOR TYPE text USING bloom AS
    OPERATOR    1   =(text, text),
    FUNCTION    1   hashtext(text);
</programlisting>
 </sect2>

 <sect2>
  <title>Limitations</title>
  <para>
   <itemizedlist>
    <listitem>
     <para>
      Only operator classes for <type>int4</type> and <type>text</type> are
      included with the module.
     </para>
    </listitem>

    <listitem>
     <para>
      Only the <literal>=</literal> operator is supported for search.  But
      it is possible to add support for arrays with union and intersection
      operations in the future.
     </para>
    </listitem>

    <listitem>
     <para>
       <literal>bloom</literal> access method doesn't support
       <literal>UNIQUE</literal> indexes.
     </para>
    </listitem>

    <listitem>
     <para>
       <literal>bloom</literal> access method doesn't support searching for
       <literal>NULL</literal> values.
     </para>
    </listitem>
   </itemizedlist>
  </para>
 </sect2>

 <sect2>
  <title>Authors</title>

  <para>
   Teodor Sigaev <email>teodor@postgrespro.ru</email>,
   Postgres Professional, Moscow, Russia
  </para>

  <para>
   Alexander Korotkov <email>a.korotkov@postgrespro.ru</email>,
   Postgres Professional, Moscow, Russia
  </para>

  <para>
   Oleg Bartunov <email>obartunov@postgrespro.ru</email>,
   Postgres Professional, Moscow, Russia
  </para>
 </sect2>

</sect1>
