<!-- $PostgreSQL: pgsql/doc/src/sgml/maintenance.sgml,v 1.76 2007/07/18 03:39:01 momjian Exp $ -->

<chapter id="maintenance">
 <title>Routine Database Maintenance Tasks</title>

 <indexterm zone="maintenance">
  <primary>maintenance</primary>
 </indexterm>

 <indexterm zone="maintenance">
  <primary>routine maintenance</primary>
 </indexterm>

  <para>
   <productname>PostgreSQL</>, like any database software, requires that certain tasks
   be performed regularly to achieve optimum performance. The tasks
   discussed here are <emphasis>required</emphasis>, but they
   are repetitive in nature and can easily be automated using standard
   Unix tools such as <application>cron</application> scripts or
   Windows' <application>Task Scheduler</>.  But it is the database
   administrator's responsibility to set up appropriate scripts, and to
   check that they execute successfully.
  </para>

  <para>
   One obvious maintenance task is creation of backup copies of the data on a
   regular schedule.  Without a recent backup, you have no chance of recovery
   after a catastrophe (disk failure, fire, mistakenly dropping a critical
   table, etc.).  The backup and recovery mechanisms available in
   <productname>PostgreSQL</productname> are discussed at length in
   <xref linkend="backup">.
  </para>

  <para>
   The other main category of maintenance task is periodic <quote>vacuuming</>
   of the database.  This activity is discussed in
   <xref linkend="routine-vacuuming">.  Closely related to this is updating
   the statistics that will be used by the query planner, as discussed in
   <xref linkend="vacuum-for-statistics">.
  </para>

  <para>
   Another task that might need periodic attention is log file management.
   This is discussed in <xref linkend="logfile-maintenance">.
  </para>

  <para>
   <productname>PostgreSQL</productname> is low-maintenance compared
   to some other database management systems.  Nonetheless,
   appropriate attention to these tasks will go far towards ensuring a
   pleasant and productive experience with the system.
  </para>

 <sect1 id="routine-vacuuming">
  <title>Routine Vacuuming</title>

  <indexterm zone="routine-vacuuming">
   <primary>vacuum</primary>
  </indexterm>

  <para>
   <productname>PostgreSQL</productname>'s <command>VACUUM</> command
   <emphasis>must</emphasis> be run on a regular basis for several reasons:

    <orderedlist>
     <listitem>
      <simpara>To recover or reuse disk space occupied by updated or deleted
      rows.</simpara>
     </listitem>

     <listitem>
      <simpara>To update data statistics used by the
      <productname>PostgreSQL</productname> query planner.</simpara>
     </listitem>

     <listitem>
      <simpara>To protect against loss of very old data due to
      <firstterm>transaction ID wraparound</>.</simpara>
     </listitem>
    </orderedlist>

   The frequency and scope of the <command>VACUUM</> operations
   performed for each of these reasons will vary depending on the
   needs of each site.  Therefore, database administrators must
   understand these issues and develop an appropriate maintenance
   strategy.  This section concentrates on explaining the high-level
   issues; for details about command syntax and so on, see the <xref
   linkend="sql-vacuum" endterm="sql-vacuum-title"> reference page.
  </para>

  <para>
   The standard form of <command>VACUUM</> can run in parallel with production
   database operations. Commands such as <command>SELECT</command>,
   <command>INSERT</command>, <command>UPDATE</command>, and <command>DELETE</command>
   will continue to function as normal, though you will not be able to modify the
   definition of a table with commands such as <command>ALTER TABLE ADD COLUMN</command>
   while it is being vacuumed.
   Also, <command>VACUUM</command> requires a substantial amount of I/O
   traffic, which can cause poor performance for other active sessions.
   There are configuration parameters that can be adjusted to reduce the
   performance impact of background vacuuming &mdash; see
   <xref linkend="runtime-config-resource-vacuum-cost">.
  </para>

  <para>
   An automated mechanism for performing the necessary <command>VACUUM</>
   operations has been added in <productname>PostgreSQL</productname> 8.1.
   See <xref linkend="autovacuum">.
  </para>

  <sect2 id="vacuum-for-space-recovery">
   <title>Recovering disk space</title>

   <indexterm zone="vacuum-for-space-recovery">
    <primary>disk space</primary>
   </indexterm>

   <para>
    In normal <productname>PostgreSQL</productname> operation, an
    <command>UPDATE</> or <command>DELETE</> of a row does not
    immediately remove the old version of the row.
    This approach is necessary to gain the benefits of multiversion
    concurrency control (see <xref linkend="mvcc">): the row version
    must not be deleted while it is still potentially visible to other
    transactions. But eventually, an outdated or deleted row version is no
    longer of interest to any transaction. The space it occupies must be
    reclaimed for reuse by new rows, to avoid infinite growth of disk
    space requirements. This is done by running <command>VACUUM</>.
   </para>

   <para>
    Clearly, a table that receives frequent updates or deletes will need
    to be vacuumed more often than tables that are seldom updated. It
    might be useful to set up periodic <application>cron</> tasks that
    <command>VACUUM</command> only selected tables, skipping tables that are known not to
    change often. This is only likely to be helpful if you have both
    large heavily-updated tables and large seldom-updated tables &mdash; the
    extra cost of vacuuming a small table isn't enough to be worth
    worrying about.
   </para>

   <para>
    There are two variants of the <command>VACUUM</command>
    command. The first form, known as <quote>lazy vacuum</quote> or
    just <command>VACUUM</command>, marks dead data in tables and
    indexes for future reuse; it does <emphasis>not</emphasis> attempt
    to reclaim the space used by this dead data unless the space is
    at the end of the table and an exclusive table lock can be easily 
    obtained. Unused space at the start or middle of the file does
    not result in the file being shortened and space returned to the
    operating system. This variant of <command>VACUUM</command> can be
    run concurrently with normal database operations.
   </para>

   <para>
    The second form is the <command>VACUUM FULL</command>
    command. This uses a more aggressive algorithm for reclaiming the
    space consumed by dead row versions. Any space that is freed by
    <command>VACUUM FULL</command> is immediately returned to the
    operating system, and the table data is physically compacted on
    the disk. Unfortunately, this variant of the
    <command>VACUUM</command> command acquires an exclusive lock on
    each table while <command>VACUUM FULL</command> is processing
    it. Therefore, frequently using <command>VACUUM FULL</command> can
    have an extremely negative effect on the performance of concurrent
    database queries.
   </para>

   <para>
    The standard form of <command>VACUUM</> is best used with the goal
    of maintaining a fairly level steady-state usage of disk space. If
    you need to return disk space to the operating system, you can use
    <command>VACUUM FULL</> &mdash; but what's the point of releasing disk
    space that will only have to be allocated again soon?  Moderately
    frequent standard <command>VACUUM</> runs are a better approach
    than infrequent <command>VACUUM FULL</> runs for maintaining
    heavily-updated tables. However, if some heavily-updated tables
    have gone too long with infrequent <command>VACUUM</>, you can
    use <command>VACUUM FULL</> or <command>CLUSTER</> to get performance
    back (it is much slower to scan a table containing almost only dead
    rows).
   </para>

   <para>
    Recommended practice for most sites is to schedule a database-wide
    <command>VACUUM</> once a day at a low-usage time of day,
    supplemented by more frequent vacuuming of heavily-updated tables
    if necessary. (Some installations with extremely high update rates
    vacuum their busiest tables as often as once every few minutes.)
    If you have multiple databases
    in a cluster, don't forget to <command>VACUUM</command> each one;
    the program <xref linkend="app-vacuumdb" endterm="app-vacuumdb-title">
    might be helpful.
   </para>

   <para>
    <command>VACUUM FULL</> is recommended for cases where you know
    you have deleted the majority of rows in a table, so that the
    steady-state size of the table can be shrunk substantially with
    <command>VACUUM FULL</>'s more aggressive approach.  Use plain
    <command>VACUUM</>, not <command>VACUUM FULL</>, for routine
    vacuuming for space recovery.
   </para>

   <para>
    If you have a table whose entire contents are deleted on a periodic
    basis, consider doing it with <command>TRUNCATE</command> rather
    than using <command>DELETE</command> followed by
    <command>VACUUM</command>. <command>TRUNCATE</command> removes the
    entire content of the table immediately, without requiring a
    subsequent <command>VACUUM</command> or <command>VACUUM
    FULL</command> to reclaim the now-unused disk space.
   </para>
  </sect2>

  <sect2 id="vacuum-for-statistics">
   <title>Updating planner statistics</title>

   <indexterm zone="vacuum-for-statistics">
    <primary>statistics</primary>
    <secondary>of the planner</secondary>
   </indexterm>

   <indexterm zone="vacuum-for-statistics">
    <primary>ANALYZE</primary>
   </indexterm>

   <para>
    The <productname>PostgreSQL</productname> query planner relies on
    statistical information about the contents of tables in order to
    generate good plans for queries.  These statistics are gathered by
    the <command>ANALYZE</> command, which can be invoked by itself or
    as an optional step in <command>VACUUM</>.  It is important to have
    reasonably accurate statistics, otherwise poor choices of plans might
    degrade database performance.
   </para>

   <para>
    As with vacuuming for space recovery, frequent updates of statistics
    are more useful for heavily-updated tables than for seldom-updated
    ones. But even for a heavily-updated table, there might be no need for
    statistics updates if the statistical distribution of the data is
    not changing much. A simple rule of thumb is to think about how much
    the minimum and maximum values of the columns in the table change.
    For example, a <type>timestamp</type> column that contains the time
    of row update will have a constantly-increasing maximum value as
    rows are added and updated; such a column will probably need more
    frequent statistics updates than, say, a column containing URLs for
    pages accessed on a website. The URL column might receive changes just
    as often, but the statistical distribution of its values probably
    changes relatively slowly.
   </para>

   <para>
    It is possible to run <command>ANALYZE</> on specific tables and even
    just specific columns of a table, so the flexibility exists to update some
    statistics more frequently than others if your application requires it.
    In practice, however, it is usually best to just analyze the entire database
    because it is a fast operation.  It uses a statistical random sampling of 
    the rows of a table rather than reading every single row.
   </para>

   <tip>
    <para>
     Although per-column tweaking of <command>ANALYZE</> frequency might not be
     very productive, you might well find it worthwhile to do per-column
     adjustment of the level of detail of the statistics collected by
     <command>ANALYZE</>.  Columns that are heavily used in <literal>WHERE</> clauses
     and have highly irregular data distributions might require a finer-grain
     data histogram than other columns.  See <command>ALTER TABLE SET
     STATISTICS</>.
    </para>
   </tip>

   <para>
    Recommended practice for most sites is to schedule a database-wide
    <command>ANALYZE</> once a day at a low-usage time of day; this can
    usefully be combined with a nightly <command>VACUUM</>.  However,
    sites with relatively slowly changing table statistics might find that
    this is overkill, and that less-frequent <command>ANALYZE</> runs
    are sufficient.
   </para>
  </sect2>

  <sect2 id="vacuum-for-wraparound">
   <title>Preventing transaction ID wraparound failures</title>

   <indexterm zone="vacuum-for-wraparound">
    <primary>transaction ID</primary>
    <secondary>wraparound</secondary>
   </indexterm>

   <para>
    <productname>PostgreSQL</productname>'s MVCC transaction semantics
    depend on being able to compare transaction ID (<acronym>XID</>)
    numbers: a row version with an insertion XID greater than the current
    transaction's XID is <quote>in the future</> and should not be visible
    to the current transaction.  But since transaction IDs have limited size
    (32 bits at this writing) a cluster that runs for a long time (more
    than 4 billion transactions) would suffer <firstterm>transaction ID
    wraparound</>: the XID counter wraps around to zero, and all of a sudden
    transactions that were in the past appear to be in the future &mdash; which
    means their outputs become invisible.  In short, catastrophic data loss.
    (Actually the data is still there, but that's cold comfort if you cannot
    get at it.)  To avoid this, it is necessary to vacuum every table
    in every database at least once every two billion transactions.
   </para>

   <para>
    The reason that periodic vacuuming solves the problem is that
    <productname>PostgreSQL</productname> distinguishes a special XID
    <literal>FrozenXID</>.  This XID is always considered older
    than every normal XID. Normal XIDs are
    compared using modulo-2<superscript>31</> arithmetic. This means
    that for every normal XID, there are two billion XIDs that are
    <quote>older</> and two billion that are <quote>newer</>; another
    way to say it is that the normal XID space is circular with no
    endpoint. Therefore, once a row version has been created with a particular
    normal XID, the row version will appear to be <quote>in the past</> for
    the next two billion transactions, no matter which normal XID we are
    talking about. If the row version still exists after more than two billion
    transactions, it will suddenly appear to be in the future. To
    prevent data loss, old row versions must be reassigned the XID
    <literal>FrozenXID</> sometime before they reach the
    two-billion-transactions-old mark. Once they are assigned this
    special XID, they will appear to be <quote>in the past</> to all
    normal transactions regardless of wraparound issues, and so such
    row versions will be good until deleted, no matter how long that is.
    This reassignment of old XIDs is handled by <command>VACUUM</>.
   </para>

   <para>
    <command>VACUUM</>'s behavior is controlled by the configuration parameter
    <xref linkend="guc-vacuum-freeze-min-age">: any XID older than
    <varname>vacuum_freeze_min_age</> transactions is replaced by
    <literal>FrozenXID</>.  Larger values of <varname>vacuum_freeze_min_age</>
    preserve transactional information longer, while smaller values increase
    the number of transactions that can elapse before the table must be
    vacuumed again.
   </para>

   <para>
    The maximum time that a table can go unvacuumed is two billion
    transactions minus the <varname>vacuum_freeze_min_age</> that was used
    when it was last vacuumed.
    If it were to go unvacuumed for longer than that,
    data loss could result.  To ensure that this does not
    happen, the <firstterm>autovacuum</> facility described in
    <xref linkend="autovacuum"> is invoked on any table
    that might contain XIDs older than the age specified by the
    configuration parameter
    <xref linkend="guc-autovacuum-freeze-max-age">.  (This will happen
    even if autovacuum is otherwise disabled.)
   </para>

   <para>
    This implies that if a table is not otherwise vacuumed,
    autovacuum will be invoked on it approximately once every
    <varname>autovacuum_freeze_max_age</> minus
    <varname>vacuum_freeze_min_age</> transactions.
    For tables that are regularly vacuumed for space reclamation purposes,
    this is of little importance.  However, for static tables
    (including tables that receive inserts, but no updates or deletes),
    there is no need for vacuuming for space reclamation, and so it can
    be useful to try to maximize the interval between forced autovacuums
    on very large static tables.  Obviously one can do this either by
    increasing <varname>autovacuum_freeze_max_age</> or by decreasing
    <varname>vacuum_freeze_min_age</>.
   </para>

   <para>
    The sole disadvantage of increasing <varname>autovacuum_freeze_max_age</>
    is that the <filename>pg_clog</> subdirectory of the database cluster
    will take more space, because it must store the commit status for all
    transactions back to the <varname>autovacuum_freeze_max_age</> horizon.
    The commit status uses two bits per transaction, so if
    <varname>autovacuum_freeze_max_age</> has its maximum allowed value of
    a little less than two billion, <filename>pg_clog</> can be expected to
    grow to about half a gigabyte.  If this is trivial compared to your
    total database size, setting <varname>autovacuum_freeze_max_age</> to
    its maximum allowed value is recommended.  Otherwise, set it depending
    on what you are willing to allow for <filename>pg_clog</> storage.
    (The default, 200 million transactions, translates to about 50MB of
    <filename>pg_clog</> storage.)
   </para>

   <para>
    One disadvantage of decreasing <varname>vacuum_freeze_min_age</> is that
    it might cause <command>VACUUM</> to do useless work: changing a table row's
    XID to <literal>FrozenXID</> is a waste of time if the row is modified
    soon thereafter (causing it to acquire a new XID).  So the setting should
    be large enough that rows are not frozen until they are unlikely to change
    any more.  Another disadvantage of decreasing this setting is
    that details about exactly which transaction inserted or modified a
    row will be lost sooner.  This information sometimes comes in handy,
    particularly when trying to analyze what went wrong after a database
    failure.  For these two reasons, decreasing this setting is not
    recommended except for completely static tables.
   </para>

   <para>
    To track the age of the oldest XIDs in a database,
    <command>VACUUM</> stores XID
    statistics in the system tables <structname>pg_class</> and
    <structname>pg_database</>.  In particular,
    the <structfield>relfrozenxid</> column of a table's
    <structname>pg_class</> row contains the freeze cutoff XID that was used
    by the last <command>VACUUM</> for that table.  All normal
    XIDs older than this cutoff XID are guaranteed to have been replaced by
    <literal>FrozenXID</> within the table.  Similarly,
    the <structfield>datfrozenxid</> column of a database's
    <structname>pg_database</> row is a lower bound on the normal XIDs
    appearing in that database &mdash; it is just the minimum of the
    per-table <structfield>relfrozenxid</> values within the database.
    A convenient way to
    examine this information is to execute queries such as:

<programlisting>
SELECT relname, age(relfrozenxid) FROM pg_class WHERE relkind = 'r';
SELECT datname, age(datfrozenxid) FROM pg_database;
</programlisting>

    The <literal>age</> column measures the number of transactions from the
    cutoff XID to the current transaction's XID.  Immediately after a
    <command>VACUUM</>, <literal>age(relfrozenxid)</> should be a little
    more than the <varname>vacuum_freeze_min_age</> setting that was used
    (more by the number of transactions started since the <command>VACUUM</>
    started).  If <literal>age(relfrozenxid)</> exceeds
    <varname>autovacuum_freeze_max_age</>, an autovacuum will soon be forced
    for the table.
   </para>

   <para>
    If for some reason autovacuum fails to clear old XIDs from a table,
    the system will begin to emit warning messages like this when the
    database's oldest XIDs reach ten million transactions from the wraparound
    point:

<programlisting>
WARNING:  database "mydb" must be vacuumed within 177009986 transactions
HINT:  To avoid a database shutdown, execute a full-database VACUUM in "mydb".
</programlisting>

    If these warnings are
    ignored, the system will shut down and refuse to execute any new
    transactions once there are fewer than 1 million transactions left
    until wraparound:

<programlisting>
ERROR:  database is shut down to avoid wraparound data loss in database "mydb"
HINT:  Stop the postmaster and use a standalone backend to VACUUM in "mydb".
</programlisting>

    The 1-million-transaction safety margin exists to let the
    administrator recover without data loss, by manually executing the
    required <command>VACUUM</> commands.  However, since the system will not
    execute commands once it has gone into the safety shutdown mode,
    the only way to do this is to stop the server and use a single-user
    backend to execute <command>VACUUM</>.  The shutdown mode is not enforced
    by a single-user backend.  See the <xref linkend="app-postgres"> reference
    page for details about using a single-user backend.
   </para>

  </sect2>

  <sect2 id="autovacuum">
   <title id="autovacuum-title">The auto-vacuum daemon</title>

   <indexterm>
    <primary>autovacuum</primary>
    <secondary>general information</secondary>
   </indexterm>
   <para>
    Beginning in <productname>PostgreSQL</productname> 8.1, there is an
    optional feature called <firstterm>autovacuum</firstterm>,
    whose purpose is to automate the execution of
    <command>VACUUM</command> and <command>ANALYZE </command> commands.
    When enabled, autovacuum checks for
    tables that have had a large number of inserted, updated or deleted
    tuples.  These checks use the row-level statistics collection facility;
    therefore, autovacuum cannot be used unless <xref
    linkend="guc-stats-start-collector"> and <xref
    linkend="guc-stats-row-level"> are set to <literal>true</literal>.
    In the default configuration, autovacuuming is enabled and the related
    configuration parameters are appropriately set.
   </para>

   <para>
    Beginning in <productname>PostgreSQL</productname> 8.3, autovacuum has a
    multi-process architecture: there is a daemon process, called the
    <firstterm>autovacuum launcher</firstterm>, which is in charge of starting
    an <firstterm>autovacuum worker</firstterm> process on each database every
    <xref linkend="guc-autovacuum-naptime"> seconds. On each run, the worker
    process checks each table within that database, and <command>VACUUM</> or
    <command>ANALYZE</> commands are issued as needed.
   </para>

   <para>
    There is a limit of <xref linkend="guc-autovacuum-max-workers"> worker
    processes that may be running at any time, so if the <command>VACUUM</>
    and <command>ANALYZE</> work to do takes too long to run, the deadline may
    be failed to meet for other databases.  Also, if a particular database
    takes a long time to process, more than one worker may be processing it
    simultaneously.  The workers are smart enough to avoid repeating work that
    other workers have done, so this is normally not a problem.  Note that the
    number of running workers does not count towards the <xref
    linkend="guc-max-connections"> nor the <xref
    linkend="guc-superuser-reserved-connections"> limits.
   </para>

   <para>
    Tables whose <structfield>relfrozenxid</> value is more than
    <varname>autovacuum_freeze_max_age</> transactions old are always
    vacuumed.  Otherwise,
    two conditions are used to determine which operation(s)
    to apply.  If the number of obsolete tuples since the last
    <command>VACUUM</command> exceeds the <quote>vacuum threshold</quote>, the
    table is vacuumed.  The vacuum threshold is defined as:
<programlisting>
vacuum threshold = vacuum base threshold + vacuum scale factor * number of tuples
</programlisting>
    where the vacuum base threshold is
    <xref linkend="guc-autovacuum-vacuum-threshold">,
    the vacuum scale factor is
    <xref linkend="guc-autovacuum-vacuum-scale-factor">,
    and the number of tuples is
    <structname>pg_class</structname>.<structfield>reltuples</structfield>.
    The number of obsolete tuples is obtained from the statistics
    collector; it is a semi-accurate count updated by each
    <command>UPDATE</command> and <command>DELETE</command> operation.  (It
    is only semi-accurate because some information might be lost under heavy
    load.)  For analyze, a similar condition is used: the threshold, defined as:
<programlisting>
analyze threshold = analyze base threshold + analyze scale factor * number of tuples
</programlisting>
    is compared to the total number of tuples inserted or updated
    since the last <command>ANALYZE</command>.
   </para>

   <para>
    The default thresholds and scale factors are taken from
    <filename>postgresql.conf</filename>, but it is possible to override them
    on a table-by-table basis by making entries in the system catalog
    <link
    linkend="catalog-pg-autovacuum"><structname>pg_autovacuum</></link>.
    If a <structname>pg_autovacuum</structname> row exists for a particular
    table, the settings it specifies are applied; otherwise the global
    settings are used.  See <xref linkend="runtime-config-autovacuum"> for
    more details on the global settings.
   </para>

   <para>
    Besides the base threshold values and scale factors, there are five
    more parameters that can be set for each table in
    <structname>pg_autovacuum</structname>.
    The first, <structname>pg_autovacuum</>.<structfield>enabled</>,
    can be set to <literal>false</literal> to instruct the autovacuum daemon
    to skip that particular table entirely.  In this case
    autovacuum will only touch the table if it must do so
    to prevent transaction ID wraparound.
    The next two parameters, the vacuum cost delay
    (<structname>pg_autovacuum</structname>.<structfield>vac_cost_delay</structfield>)
    and the vacuum cost limit
    (<structname>pg_autovacuum</structname>.<structfield>vac_cost_limit</structfield>), 
    are used to set table-specific values for the
    <xref linkend="runtime-config-resource-vacuum-cost" endterm="runtime-config-resource-vacuum-cost-title">
    feature.
    The last two parameters,
    (<structname>pg_autovacuum</structname>.<structfield>freeze_min_age</structfield>)
    and
    (<structname>pg_autovacuum</structname>.<structfield>freeze_max_age</structfield>), 
    are used to set table-specific values for
    <xref linkend="guc-vacuum-freeze-min-age"> and
    <xref linkend="guc-autovacuum-freeze-max-age"> respectively.
   </para>

   <para>
    If any of the values in <structname>pg_autovacuum</structname>
    are set to a negative number, or if a row is not present at all in
    <structname>pg_autovacuum</structname> for any particular table, the
    corresponding values from <filename>postgresql.conf</filename> are used.
   </para>

   <para>
    There is not currently any support for making
    <structname>pg_autovacuum</structname> entries, except by doing
    manual <command>INSERT</>s into the catalog.  This feature will be
    improved in future releases, and it is likely that the catalog
    definition will change.
   </para>

   <caution>
    <para>
     The contents of the <structname>pg_autovacuum</structname> system
     catalog are currently not saved in database dumps created by the
     tools <application>pg_dump</> and <application>pg_dumpall</>.  If
     you want to preserve them across a dump/reload cycle, make sure
     you dump the catalog manually.
    </para>
   </caution>

   <para>
    When multiple workers are running, the cost limit is
    <quote>balanced</quote> among all the running workers, so that the
    total impact on the system is the same, regardless of the number
    of workers actually running.
   </para>
  </sect2>
 </sect1>


 <sect1 id="routine-reindex">
  <title>Routine Reindexing</title>

  <indexterm zone="routine-reindex">
   <primary>reindex</primary>
  </indexterm>

  <para>
   In some situations it is worthwhile to rebuild indexes periodically
   with the <xref linkend="sql-reindex" endterm="sql-reindex-title">
   command.
  </para>

  <para>
   In <productname>PostgreSQL</> releases before 7.4, periodic reindexing
   was frequently necessary to avoid <quote>index bloat</>, due to lack of
   internal space reclamation in B-tree indexes.  Any situation in which the
   range of index keys changed over time &mdash; for example, an index on
   timestamps in a table where old entries are eventually deleted &mdash;
   would result in bloat, because index pages for no-longer-needed portions
   of the key range were not reclaimed for re-use.  Over time, the index size
   could become indefinitely much larger than the amount of useful data in it.
  </para>

  <para>
   In <productname>PostgreSQL</> 7.4 and later, index pages that have become
   completely empty are reclaimed for re-use.  There is still a possibility
   for inefficient use of space: if all but a few index keys on a page have
   been deleted, the page remains allocated.  So a usage pattern in which all
   but a few keys in each range are eventually deleted will see poor use of
   space.  For such usage patterns, periodic reindexing is recommended.
  </para>

  <para>
   The potential for bloat in non-B-tree indexes has not been well
   characterized.  It is a good idea to keep an eye on the index's physical
   size when using any non-B-tree index type.
  </para>

  <para>
   Also, for B-tree indexes a freshly-constructed index is somewhat faster to
   access than one that has been updated many times, because logically
   adjacent pages are usually also physically adjacent in a newly built index.
   (This consideration does not currently apply to non-B-tree indexes.)  It
   might be worthwhile to reindex periodically just to improve access speed.
  </para>
 </sect1>


 <sect1 id="logfile-maintenance">
  <title>Log File Maintenance</title>

  <indexterm zone="logfile-maintenance">
   <primary>server log</primary>
   <secondary>log file maintenance</secondary>
  </indexterm>

  <para>
   It is a good idea to save the database server's log output
   somewhere, rather than just routing it to <filename>/dev/null</>.
   The log output is invaluable when it comes time to diagnose
   problems.  However, the log output tends to be voluminous
   (especially at higher debug levels) and you won't want to save it
   indefinitely.  You need to <quote>rotate</> the log files so that
   new log files are started and old ones removed after a reasonable
   period of time.
  </para>

  <para>
   If you simply direct the <systemitem>stderr</> of
   <command>postgres</command> into a
   file, you will have log output, but
   the only way to truncate the log file is to stop and restart
   the server. This might be OK if you are using
   <productname>PostgreSQL</productname> in a development environment,
   but few production servers would find this behavior acceptable.
  </para>

  <para>
   A better approach is to send the server's
   <systemitem>stderr</> output to some type of log rotation program.
   There is a built-in log rotation program, which you can use by
   setting the configuration parameter <literal>redirect_stderr</> to
   <literal>true</> in <filename>postgresql.conf</>.  The control
   parameters for this program are described in <xref
   linkend="runtime-config-logging-where">.
  </para>

  <para>
   Alternatively, you might prefer to use an external log rotation
   program, if you have one that you are already using with other
   server software. For example, the <application>rotatelogs</application>
   tool included in the <productname>Apache</productname> distribution
   can be used with <productname>PostgreSQL</productname>.  To do this,
   just pipe the server's
   <systemitem>stderr</> output to the desired program.
   If you start the server with
   <command>pg_ctl</>, then <systemitem>stderr</>
   is already redirected to <systemitem>stdout</>, so you just need a
   pipe command, for example:

<programlisting>
pg_ctl start | rotatelogs /var/log/pgsql_log 86400
</programlisting>
  </para>

  <para>
   Another production-grade approach to managing log output is to
   send it all to <application>syslog</> and let
   <application>syslog</> deal with file rotation. To do this, set the
   configuration parameter <literal>log_destination</> to <literal>syslog</>
   (to log to <application>syslog</> only) in
   <filename>postgresql.conf</>. Then you can send a <literal>SIGHUP</literal>
   signal to the <application>syslog</> daemon whenever you want to force it
   to start writing a new log file.  If you want to automate log
   rotation, the <application>logrotate</application> program can be
   configured to work with log files from
   <application>syslog</application>.
  </para>

  <para>
   On many systems, however, <application>syslog</> is not very reliable,
   particularly with large log messages; it might truncate or drop messages
   just when you need them the most.  Also, on <productname>Linux</>,
   <application>syslog</> will sync each message to disk, yielding poor
   performance.  (You can use a <literal>-</> at the start of the file name
   in the <application>syslog</> configuration file to disable this behavior.)
  </para>

  <para>
   Note that all the solutions described above take care of starting new
   log files at configurable intervals, but they do not handle deletion
   of old, no-longer-interesting log files.  You will probably want to set
   up a batch job to periodically delete old log files.  Another possibility
   is to configure the rotation program so that old log files are overwritten
   cyclically.
  </para>
 </sect1>
</chapter>
