<Chapter Id="libpq">
<Title><FileName>libpq</FileName></Title>

<Para>

<FileName>libpq</FileName> is the C application programmer's interface to
<ProductName>Postgres</ProductName>.  <FileName>libpq</FileName> is a set
of library routines that allow client programs to pass queries to the
<ProductName>Postgres</ProductName> backend server and to receive the
results of these queries.  <FileName>libpq</FileName> is also the
underlying engine for several other <ProductName>Postgres</ProductName>
application interfaces, including <FileName>libpq++</FileName> (C++),
<FileName>libpgtcl</FileName> (Tcl), <FileName>perl5</FileName>, and
<FileName>ecpg</FileName>.  So some aspects of libpq's behavior will be
important to you if you use one of those packages.

Three short programs are included at the end of this section to show how
to write programs that use <FileName>libpq</FileName>.  There are several
complete examples of <FileName>libpq</FileName> applications in the
following directories:

<ProgramListing>
    ../src/test/regress
    ../src/test/examples
    ../src/bin/psql
</ProgramListing>

<Para>
Frontend programs which use <FileName>libpq</FileName> must include the
header file <FileName>libpq-fe.h</FileName> and must link with the
<FileName>libpq</FileName> library.
</Para>

<Sect1>
<Title>Database Connection Functions</Title>

<Para>
     The following routines deal with making a connection to
     a <ProductName>Postgres</ProductName> backend server.  The application
     program can have several backend connections open at one time.
     (One reason to do that is to access more than one database.)
     Each connection is represented by a PGconn object which is obtained
     from PQconnectdb() or PQsetdbLogin().  NOTE that these functions
     will always return a non-null object pointer, unless perhaps
     there is too little memory even to allocate the PGconn object.
     The  PQstatus function should be called
     to check whether  a  connection  was  successfully made
     before queries are sent via the connection object.
<ItemizedList>
<ListItem>
<Para>
<Function>PQsetdbLogin</Function> 
          Makes a new connection to a backend.
<synopsis>
PGconn *PQsetdbLogin(const char *pghost,
                const char *pgport,
                const char *pgoptions,
                const char *pgtty,
                const char *dbName,
                const char *login,
                const char *pwd)
</synopsis>
          If  any  argument  is NULL, then the corresponding
          environment variable (see "Environment Variables" section)
          is checked. If the  environment  variable
	  is  also  not  set, then hardwired defaults are used.
          The return value is a pointer to an abstract struct
          representing the connection to the backend.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQsetdb</Function> 
          Makes a new connection to a backend.
<synopsis>
PGconn *PQsetdb(char *pghost,
                char *pgport,
                char *pgoptions,
                char *pgtty,
                char *dbName)
</synopsis>
          This is a macro that calls PQsetdbLogin() with null pointers
          for the login and pwd parameters.  It is provided primarily
	  for backward compatibility with old programs.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQconnectdb</Function> 
          Makes a new connection to a backend.
<synopsis>
PGconn *PQconnectdb(const char *conninfo)
</synopsis>
          This routine opens a new database connection using parameters
          taken from a string.  Unlike PQsetdbLogin(), the parameter set
          can be extended without changing the function signature, so use
          of this routine is encouraged for new application
	  programming.  The passed string can be empty to use all default
          parameters, or it can contain one or more parameter settings
          separated by whitespace.  Each parameter setting is in the form
          keyword = value.  (To write a null value or a value containing
          spaces, surround it with single quotes, eg, keyword = 'a value'.
          Single quotes within the value must be written as \'.  Spaces
          around the equal sign are optional.)  The currently recognized
          parameter keywords are:
<ItemizedList>
<ListItem>
<Para>
<Acronym>host</Acronym> -- host to connect to.
If a non-zero-length string is specified, TCP/IP communication is used.
Without a host name, libpq will connect using a local Unix domain socket.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>port</Acronym> -- port number to connect to at the server host,
or socket filename extension for Unix-domain connections.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>dbname</Acronym> -- database name.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>user</Acronym> -- user name for authentication.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>password</Acronym> -- 
password used if the backend demands password authentication.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>authtype</Acronym> -- authorization type.  (No longer used,
since the backend now chooses how to authenticate users.  libpq still
accepts and ignores this keyword for backward compatibility.)
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>options</Acronym> -- trace/debug options to send to backend.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>tty</Acronym> -- file or tty for optional debug output.
</Para>
</ListItem>
</ItemizedList>
Like PQsetdbLogin, PQconnectdb uses environment variables or built-in
default values for unspecified options.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQconndefaults</Function>  
         Returns the default connection options.
<synopsis>
PQconninfoOption *PQconndefaults(void)

struct PQconninfoOption
	{
		char   *keyword;   /* The keyword of the option	*/
		char   *envvar;    /* Fallback environment variable name */
		char   *compiled;  /* Fallback compiled in default value */
		char   *val;	   /* Options value */
		char   *label;	   /* Label for field in connect dialog	*/
		char   *dispchar;  /* Character to display for this field
				      in a connect dialog. Values are:
				      ""	Display entered value as is
				      "*"	Password field - hide value
				      "D"	Debug options - don't
				      create a field by default */
		int	dispsize;  /* Field size in characters for dialog */
	};

</synopsis>
	Returns the address of the connection options structure.  This may
	be used to determine all possible PQconnectdb options and their
	current default values.  The return value points to an array of
	PQconninfoOption structs, which ends with an entry having a NULL
	keyword pointer.  Note that the default values ("val" fields)
        will depend on environment variables and other context.
        Callers must treat the connection options data as read-only.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQfinish</Function>
          Close  the  connection to the backend.  Also frees
          memory used by the PGconn object.
<synopsis>
void PQfinish(PGconn *conn)
</synopsis>
Note that even if the backend connection attempt fails (as
indicated by PQstatus), the application should call PQfinish
to free the memory used by the PGconn object.
The PGconn pointer should not be used after PQfinish has been called.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQreset</Function>
          Reset the communication  port  with  the  backend.
<synopsis>
void PQreset(PGconn *conn)
</synopsis>
          This function will close the connection
          to the backend and attempt to  reestablish  a  new
          connection to the same postmaster, using all the same
	  parameters previously used.  This may be useful for
	  error recovery if a working connection is lost.
</Para>
</ListItem>

</ItemizedList>
</Para>

<Para>
<FileName>libpq</FileName> application programmers should be careful to
maintain the PGconn abstraction.  Use the accessor functions below to get
at the contents of PGconn.  Avoid directly referencing the fields of the
PGconn structure because they are subject to change in the future.
(Beginning in <ProductName>Postgres</ProductName> release 6.4, the
definition of struct PGconn is not even provided in libpq-fe.h.  If you
have old code that accesses PGconn fields directly, you can keep using it
by including libpq-int.h too, but you are encouraged to fix the code
soon.)
<ItemizedList>
<ListItem>
<Para>
<Function>PQdb</Function>  
         Returns the database name of the connection.
<synopsis>
char *PQdb(PGconn *conn)
</synopsis>
PQdb and the next several functions return the values established
at connection.  These values are fixed for the life of the PGconn
object.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQuser</Function>
         Returns the user name of the connection.
<synopsis>
char *PQuser(PGconn *conn)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQpass</Function>
         Returns the password of the connection.
<synopsis>
char *PQpass(PGconn *conn)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQhost</Function>
         Returns the server host name of the connection.
<synopsis>
char *PQhost(PGconn *conn)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQport</Function>
         Returns the port of the connection.
<synopsis>
char *PQport(PGconn *conn)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQtty</Function>
         Returns the debug tty of the connection.
<synopsis>
char *PQtty(PGconn *conn)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQoptions</Function>
       Returns the backend options used in  the  connection.
<synopsis>
char *PQoptions(PGconn *conn)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQstatus</Function>
         Returns the status of the connection. 
         The status can be CONNECTION_OK or CONNECTION_BAD.
<synopsis>
ConnStatusType *PQstatus(PGconn *conn)
</synopsis>

<Para>
A failed connection attempt is signaled by status CONNECTION_BAD.
Ordinarily, an OK status will remain so until PQfinish, but a
communications failure might result in the status changing to
CONNECTION_BAD prematurely.  In that case the application could
try to recover by calling PQreset.
</ListItem>

<ListItem>
<Para>
<Function>PQerrorMessage</Function>
         Returns the error message most recently generated by
         an operation on the connection.
<synopsis>
char *PQerrorMessage(PGconn* conn);
</synopsis>

<Para>
Nearly all libpq functions will set PQerrorMessage if they fail.
Note that by libpq convention, a non-empty PQerrorMessage will
include a trailing newline.
</ListItem>

<ListItem>
<Para>
<Function>PQbackendPID</Function>
         Returns the process ID of the backend server handling this
	 connection.
<synopsis>
int PQbackendPID(PGconn *conn);
</synopsis>
The backend PID is useful for debugging purposes and for comparison
to NOTIFY messages (which include the PID of the notifying backend).
Note that the PID belongs to a process executing on the database
server host, not the local host!
</Para>
</ListItem>

</ItemizedList>
</Para>
</Sect1>

<Sect1>
<Title>Query Execution Functions</Title>

<Para>
Once a connection to a database server has been successfully
established, the functions described here are used to perform
SQL queries and commands.
<ItemizedList>
<ListItem>
<Para>
<Function>PQexec</Function>
          Submit a query to <ProductName>Postgres</ProductName>
          and wait for the result.
<synopsis>
PGresult *PQexec(PGconn *conn,
                 const char *query);
</synopsis>
          Returns  a  PGresult pointer or possibly a NULL pointer.
          A non-NULL pointer will generally be returned except in
          out-of-memory conditions or serious errors such as inability
          to send the query to the backend.
          If a NULL is returned, it
	  should be treated like a PGRES_FATAL_ERROR result.  Use
	  PQerrorMessage to get more information about the error.
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
The <Function>PGresult</Function> structure encapsulates the query result
returned by the backend.
<FileName>libpq</FileName> application programmers should be careful to
maintain the PGresult abstraction.  Use the accessor functions below to get
at the contents of PGresult.  Avoid directly referencing the fields of the
PGresult structure because they are subject to change in the future.
(Beginning in <ProductName>Postgres</ProductName> release 6.4, the
definition of struct PGresult is not even provided in libpq-fe.h.  If you
have old code that accesses PGresult fields directly, you can keep using it
by including libpq-int.h too, but you are encouraged to fix the code
soon.)

<ItemizedList>
<ListItem>
<Para>
<Function>PQresultStatus</Function>
          Returns the result status of the query.  PQresultStatus can return one of the following values:
<synopsis>
PGRES_EMPTY_QUERY,
PGRES_COMMAND_OK,  /* the query was a command returning no data */
PGRES_TUPLES_OK,  /* the query successfully returned tuples */
PGRES_COPY_OUT,  /* Copy Out (from server) data transfer started */
PGRES_COPY_IN,  /* Copy In (to server) data transfer started */
PGRES_BAD_RESPONSE, /* an unexpected response was received */
PGRES_NONFATAL_ERROR,
PGRES_FATAL_ERROR
</synopsis>
          If  the result status is PGRES_TUPLES_OK, then the
          routines described below can be  used  to  retrieve  the
          tuples returned by the query.  Note that a SELECT that
	  happens to retrieve zero tuples still shows PGRES_TUPLES_OK;
	  PGRES_COMMAND_OK is for commands that can never return tuples.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQresultErrorMessage</Function>
returns the error message associated with the query, or an empty string
if there was no error.
<synopsis>
const char *PQresultErrorMessage(PGresult *res);
</synopsis>
Immediately following a PQexec or PQgetResult call, PQerrorMessage
(on the connection) will return the same string as PQresultErrorMessage
(on the result).  However, a PGresult will retain its error message
until destroyed, whereas the connection's error message will change when
subsequent operations are done.  Use PQresultErrorMessage when you want to
know the status associated with a particular PGresult; use PQerrorMessage
when you want to know the status from the latest operation on the connection.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQntuples</Function>
          Returns the number of tuples (instances)
          in the query result.
<synopsis>
int PQntuples(PGresult *res);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQnfields</Function>
          Returns   the   number    of    fields
          (attributes) in each tuple of the query result.
<synopsis>
int PQnfields(PGresult *res);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQbinaryTuples</Function>
          Returns 1 if the PGresult contains binary tuple data,
	  0 if it contains ASCII data.
<synopsis>
int PQbinaryTuples(PGresult *res);
</synopsis>
Currently, binary tuple data can only be returned by a query that
extracts data from a <Acronym>BINARY</Acronym> cursor.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQfname</Function>
 Returns the field (attribute) name associated with the given field  index.
 Field  indices start at 0.
<synopsis>
char *PQfname(PGresult *res,
              int field_index);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQfnumber</Function>
            Returns  the  field  (attribute)  index
          associated with the given field name.
<synopsis>
int PQfnumber(PGresult *res,
              char* field_name);
</synopsis>

<Para>
        -1 is returned if the given name does not match any field.
</ListItem>

<ListItem>
<Para>
<Function>PQftype</Function>
            Returns the field type associated with the
          given  field  index.  The  integer  returned is an
          internal coding of the type.  Field indices  start
          at 0.
<synopsis>
Oid PQftype(PGresult *res,
            int field_num);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQfsize</Function>
          Returns  the  size  in bytes of the field
          associated with the given field index. If the size
          returned  is  -1,  the  field is a variable length
          field.  Field indices start at 0.
<synopsis>
int PQfsize(PGresult *res,
            int field_index);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQfmod</Function>
          Returns  the type-specific modification data of the field
          associated with the given field index.
          Field indices start at 0.
<synopsis>
int PQfmod(PGresult *res,
           int field_index);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQgetvalue</Function>
            Returns a single field  (attribute)  value of one tuple
	    of a PGresult.
	    Tuple and field indices start at 0.
<synopsis>
char* PQgetvalue(PGresult *res,
                 int tup_num,
                 int field_num);
</synopsis>
          For most queries, the value returned by PQgetvalue
          is a null-terminated ASCII  string  representation
          of the attribute value.  If the query extracted data from
          a <Acronym>BINARY</Acronym> cursor, then  the  value  returned  by
          PQgetvalue  is  the  binary  representation of the
          type in the internal format of the backend server.
          It  is the programmer's responsibility to cast and
          convert the data to the correct C type.  The pointer
          returned  by  PQgetvalue points to storage that is
          part of the PGresult structure.  One should not modify it,
          and one must explicitly 
          copy the value into other storage if it is to
          be used past the lifetime of the  PGresult  structure itself.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQgetisnull</Function>
           Tests a field for a NULL entry.
           Tuple and field indices start at 0.
<synopsis>
int PQgetisnull(PGresult *res,
                int tup_num,
                int field_num);
</synopsis>
            This function returns  1 if the field contains a NULL, 0 if
            it contains a non-null value.  (Note that PQgetvalue
            will return an empty string, not a null pointer, for a NULL
            field.)
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQgetlength</Function>
          Returns   the   length  of  a  field
          (attribute) in bytes.
          Tuple and field indices start at 0.
<synopsis>
int PQgetlength(PGresult *res,
                int tup_num,
                int field_num);
</synopsis>
This is the actual data length for the particular data value,
whereas PQfsize shows the allocated space for all entries in
this column.
If the field  is  a  struct
          varlena, the length returned here does not include
          the size field of the varlena, i.e., it is 4 bytes
          less.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQcmdStatus</Function>
          Returns the command status string from the SQL command that
	  generated the PGresult.
<synopsis>
char *PQcmdStatus(PGresult *res);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQcmdTuples</Function>
	  Returns the number of rows affected by the SQL command.
<synopsis>
const char *PQcmdTuples(PGresult *res);
</synopsis>
          If the SQL command that generated the
	  PGresult was INSERT, UPDATE or DELETE, this returns a
	  string containing the number of rows affected.  If the
          command was anything else, it returns the empty string.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQoidStatus</Function>
          Returns a string with the object id of  the  tuple
          inserted,  if  the SQL command was an INSERT.
          Otherwise, returns an empty string.
<synopsis>
char* PQoidStatus(PGresult *res);
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQprint</Function>
          Prints out all the  tuples  and,  optionally,  the
          attribute  names  to  the specified output stream.
<synopsis>
void PQprint(FILE* fout,      /* output stream */
             PGresult* res,
             PQprintOpt* po);

struct _PQprintOpt
	{
		pqbool	header;	     /* print output field headings and row count */
		pqbool	align;	     /* fill align the fields */
		pqbool	standard;    /* old brain dead format */
		pqbool	html3;	     /* output html tables */
		pqbool	expanded;    /* expand tables */
		pqbool	pager;	     /* use pager for output if needed */
		char	*fieldSep;   /* field separator */
		char	*tableOpt;   /* insert to HTML &lt;table ...&gt; */
		char	*caption;    /* HTML &lt;caption&gt; */
		char	**fieldName; /* null terminated array of replacement field names */
	};
</synopsis>
	This function is intended to replace PQprintTuples(), which is
	now obsolete.  The <FileName>psql</FileName> program uses
	PQprint() to display query results.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQprintTuples</Function>
          Prints out all the  tuples  and,  optionally,  the
          attribute  names  to  the specified output stream.
<synopsis>
void PQprintTuples(PGresult* res,
                   FILE* fout,      /* output stream */
                   int printAttName,/* print attribute names or not*/
                   int terseOutput, /* delimiter bars or not?*/
                   int width);      /* width of column, variable width if 0*/
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQdisplayTuples</Function>
          Prints out all the  tuples  and,  optionally,  the
          attribute  names  to  the specified output stream.
<synopsis>
void PQdisplayTuples(PGresult* res,
                     FILE* fout,           /* output stream */
                     int fillAlign,        /* space fill to align columns */
                     const char *fieldSep, /* field separator */
                     int printHeader,      /* display headers? */
                     int quiet);           /* suppress print of row count at end */
</synopsis>
          PQdisplayTuples() was intended to supersede PQprintTuples(), and
          is in turn superseded by PQprint().
</Para>
</ListItem>
<ListItem>
<Para>
<Function>PQclear</Function>
          Frees  the  storage  associated with the PGresult.
          Every query result should be freed via PQclear  when
          it  is  no  longer needed.
<synopsis>
void PQclear(PQresult *res);
</synopsis>
          You can keep a PGresult object around for as long as you
          need it; it does not go away when you issue a new query,
          nor even if you close the connection.  To get rid of it,
          you must call PQclear.  Failure to do this will
          result in memory leaks in  the  frontend  application.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQmakeEmptyPGresult</Function>
          Constructs an empty PGresult object with the given status.
<synopsis>
PGresult* PQmakeEmptyPGresult(PGconn *conn, ExecStatusType status);
</synopsis>
This is libpq's internal routine to allocate and initialize an empty
PGresult object.  It is exported because some applications find it
useful to generate result objects (particularly objects with error
status) themselves.  If conn is not NULL and status indicates an error,
the connection's current errorMessage is copied into the PGresult.
Note that PQclear should eventually be called on the object, just
as with a PGresult returned by libpq itself.
</Para>
</ListItem>

</ItemizedList>
</Para>
</Sect1>

<Sect1>
<Title>Asynchronous Query Processing</Title>

<Para>
The PQexec function is adequate for submitting queries in simple synchronous
applications.  It has a couple of major deficiencies however:

<Para>
<ItemizedList>
<ListItem>
<Para>
PQexec waits for the query to be completed.  The application may have other
work to do (such as maintaining a user interface), in which case it won't
want to block waiting for the response.
</Para>
</ListItem>
<ListItem>
<Para>
Since control is buried inside PQexec, it is hard for the frontend
to decide it would like to try to cancel the ongoing query.  (It can be
done from a signal handler, but not otherwise.)
</Para>
</ListItem>
<ListItem>
<Para>
PQexec can return only one PGresult structure.  If the submitted query
string contains multiple SQL commands, all but the last PGresult are
discarded by PQexec.
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
Applications that do not like these limitations can instead use the
underlying functions that PQexec is built from: PQsendQuery and
PQgetResult.

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>PQsendQuery</Function>
          Submit a query to <ProductName>Postgres</ProductName> without
	  waiting for the result(s).  TRUE is returned if the query was
	  successfully dispatched, FALSE if not (in which case, use
	  PQerrorMessage to get more information about the failure).
<synopsis>
int PQsendQuery(PGconn *conn,
                const char *query);
</synopsis>
	  After successfully calling PQsendQuery, call PQgetResult one or more
	  times to obtain the query results.  PQsendQuery may not be called
	  again (on the same connection) until PQgetResult has returned NULL,
	  indicating that the query is done.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQgetResult</Function>
          Wait for the next result from a prior PQsendQuery,
	  and return it.  NULL is returned when the query is complete
	  and there will be no more results.
<synopsis>
PGresult *PQgetResult(PGconn *conn);
</synopsis>
	  PQgetResult must be called repeatedly until it returns NULL,
	  indicating that the query is done.  (If called when no query is
	  active, PQgetResult will just return NULL at once.)
	  Each non-null result from PQgetResult should be processed using
	  the same PGresult accessor functions previously described.
	  Don't forget to free each result object with PQclear when done with it.
	  Note that PQgetResult will block only if a query is active and the
	  necessary response data has not yet been read by PQconsumeInput.
</Para>
</ListItem>

</ItemizedList>
</Para>

<Para>
Using PQsendQuery and PQgetResult solves one of PQexec's problems:
if a query string contains multiple SQL commands, the results of those
commands can be obtained individually.  (This allows a simple form of
overlapped processing, by the way: the frontend can be handling the
results of one query while the backend is still working on later
queries in the same query string.)  However, calling PQgetResult will
still cause the frontend to block until the backend completes the
next SQL command.  This can be avoided by proper use of three more
functions:

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>PQconsumeInput</Function>
	  If input is available from the backend, consume it.
<synopsis>
int PQconsumeInput(PGconn *conn);
</synopsis>
PQconsumeInput normally returns 1 indicating "no error", but returns
0 if there was some kind of trouble (in which case PQerrorMessage
is set).  Note that the result does not say whether any input data
was actually collected.   After calling PQconsumeInput,
the application may check PQisBusy and/or PQnotifies to see if their state
has changed.
	  PQconsumeInput may be called even if the application is not
	  prepared to deal with a result or notification just yet.
	  It will read available data and save it in a buffer, thereby
	  causing a select(2) read-ready indication to go away.  The
	  application can thus use PQconsumeInput to clear the select
	  condition immediately, and then examine the results at leisure.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQisBusy</Function>
	  Returns TRUE if a query is busy, that is, PQgetResult would block
	  waiting for input.  A FALSE return indicates that PQgetResult can
	  be called with assurance of not blocking.
<synopsis>
int PQisBusy(PGconn *conn);
</synopsis>
	  PQisBusy will not itself attempt to read data from the backend;
	  therefore PQconsumeInput must be invoked first, or the busy
	  state will never end.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQsocket</Function>
	  Obtain the file descriptor number for the backend connection socket.
	  A valid descriptor will be >= 0; a result of -1 indicates that
	  no backend connection is currently open.
<synopsis>
int PQsocket(PGconn *conn);
</synopsis>
	  PQsocket should be used to obtain the backend socket descriptor
	  in preparation for executing select(2).  This allows an application
	  to wait for either backend responses or other conditions.
	  If the result of select(2) indicates that data can be read from
	  the backend socket, then PQconsumeInput should be called to read the
	  data; after which, PQisBusy, PQgetResult, and/or PQnotifies can be
	  used to process the response.
</Para>
</ListItem>

</ItemizedList>
</Para>

<Para>
A typical frontend using these functions will have a main loop that uses
select(2) to wait for all the conditions that it must respond to.  One of
the conditions will be input available from the backend, which in select's
terms is readable data on the file descriptor identified by PQsocket.
When the main loop detects input ready, it should call PQconsumeInput
to read the input.  It can then call PQisBusy, followed by PQgetResult
if PQisBusy returns FALSE.  It can also call PQnotifies to detect NOTIFY
messages (see "Asynchronous Notification", below).  An example is given
in the sample programs section.

<Para>
A frontend that uses PQsendQuery/PQgetResult can also attempt to cancel
a query that is still being processed by the backend.

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>PQrequestCancel</Function>
	  Request that <ProductName>Postgres</ProductName> abandon
	  processing of the current query.
<synopsis>
int PQrequestCancel(PGconn *conn);
</synopsis>
	  The return value is TRUE if the cancel request was successfully
	  dispatched, FALSE if not.  (If not, PQerrorMessage tells why not.)
	  Successful dispatch is no guarantee that the request will have any
	  effect, however.  Regardless of the return value of PQrequestCancel,
	  the application must continue with the normal result-reading
	  sequence using PQgetResult.  If the cancellation
	  is effective, the current query will terminate early and return
	  an error result.  If the cancellation fails (say because the
	  backend was already done processing the query), then there will
	  be no visible result at all.
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
Note that if the current query is part of a transaction, cancellation
will abort the whole transaction.

<Para>
PQrequestCancel can safely be invoked from a signal handler.  So, it is
also possible to use it in conjunction with plain PQexec, if the decision
to cancel can be made in a signal handler.  For example, psql invokes
PQrequestCancel from a SIGINT signal handler, thus allowing interactive
cancellation of queries that it issues through PQexec.  Note that
PQrequestCancel will have no effect if the connection is not currently open
or the backend is not currently processing a query.

</Sect1>

<Sect1>
<Title>Fast Path</Title>

<Para>
<ItemizedList>
<ListItem>
<Para>
<ProductName>Postgres</ProductName>  provides  a fast path interface to send function
 calls to the backend.  This  is  a  trapdoor  into
     system  internals and can be a potential security hole.
     Most users will not need this feature.
<synopsis>
PGresult* PQfn(PGconn* conn,
               int fnid,
               int *result_buf,
               int *result_len,
               int result_is_int,
               PQArgBlock *args,
               int nargs);
</synopsis>
     The fnid argument is the object identifier of the function to be
     executed.
     result_buf is the buffer in which
     to place the return value.  The caller must  have  allocated
     sufficient space to store the return value.  The
     result length will be returned in the  storage  pointed
     to  by  result_len.   If the result is to be an integer
     value, than result_is_int should be set to 1; otherwise
     it  should  be  set  to  0.  args and nargs specify the
     arguments to the function.
<synopsis>
typedef struct {
             int len;
             int isint;
             union {
                 int *ptr;
                 int integer;
             } u;
         } PQArgBlock;
</synopsis>
     PQfn always returns a valid PGresult*.  The  resultStatus  should be checked before the result is used.   The
     caller is responsible for  freeing  the  PGresult  with
     PQclear when it is no longer needed.
</Para>
</ListItem>
</ItemizedList>
</Para>

</Sect1>

<Sect1>
<Title>Asynchronous Notification</Title>

<Para>
<ProductName>Postgres</ProductName> supports asynchronous notification via the
LISTEN and NOTIFY commands.  A backend registers its interest in a particular
notification condition with the LISTEN command (and can stop listening
with the UNLISTEN command).  All backends listening on a
particular condition will be notified asynchronously when a NOTIFY of that
condition name is executed by any backend.  No additional information is
passed from the notifier to the listener.  Thus, typically, any actual data
that needs to be communicated is transferred through a database relation.
Commonly the condition name is the same as the associated relation, but it is
not necessary for there to be any associated relation.

<Para>
<FileName>libpq</FileName> applications submit LISTEN and UNLISTEN
commands as ordinary SQL queries.  Subsequently, arrival of NOTIFY
messages can be detected by calling PQnotifies().

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>PQnotifies</Function>
          Returns  the next notification from a list of unhandled
          notification messages received from the backend.  Returns NULL if
          there are no pending notifications.  Once a notification is
	  returned from PQnotifies, it is considered handled and will be
	  removed from the list of notifications.
<synopsis>
PGnotify* PQnotifies(PGconn *conn);
</synopsis>
	  After processing a PGnotify object returned by PQnotifies,
	  be sure to free it with free() to avoid a memory leak.
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
The  second  sample program gives an example of the use
of asynchronous notification.

<Para>
PQnotifies() does not actually read backend data; it just returns messages
previously absorbed by another <FileName>libpq</FileName> function.  In prior
releases of <FileName>libpq</FileName>, the only way to ensure timely receipt
of NOTIFY messages was to constantly submit queries, even empty ones, and then
check PQnotifies() after each PQexec().  While this still works, it is
deprecated as a waste of processing power.  A better way to check for NOTIFY
messages when you have no useful queries to make is to call PQconsumeInput(),
then check PQnotifies().  You can use select(2) to wait for backend data to
arrive, thereby using no CPU power unless there is something to do.  Note that
this will work OK whether you use PQsendQuery/PQgetResult or plain old PQexec
for queries.  You should, however, remember to check PQnotifies() after each
PQgetResult or PQexec to see if any notifications came in during the
processing of the query.
</Para>

</Sect1>

<Sect1>
<Title>Functions Associated with the COPY Command</Title>

<Para>
     The COPY command in <ProductName>Postgres</ProductName> has options to  read  from
     or  write  to  the  network  connection  used by <FileName>libpq</FileName>.
     Therefore, functions are necessary to access this  network
     connection directly so applications may take advantage of this capability.
</Para>

<Para>
     These functions should be executed only after obtaining a PGRES_COPY_OUT
     or PGRES_COPY_IN result object from PQexec or PQgetResult.
</Para>

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>PQgetline</Function>
          Reads  a  newline-terminated  line  of  characters
          (transmitted  by the backend server) into a buffer
          string of size length.
<synopsis>
int PQgetline(PGconn *conn,
              char *string,
              int length)
</synopsis>
  Like fgets(3),  this  routine copies up to length-1 characters into string.
          It is like gets(3), however, in that  it  converts
          the terminating newline into a null character.
          PQgetline returns EOF at EOF, 0 if the entire line
          has been read, and 1 if the buffer is full but the
          terminating newline has not yet been read.
          Notice that the application must check to see if a
          new line consists of  the  two characters  "\.",
          which  indicates  that the backend server has finished sending
	  the results  of  the  copy  command.
If  the  application might
receive lines that are more than length-1  characters  long,
care is needed to be sure one recognizes the "\." line correctly
(and does not, for example, mistake the end of a long data line
for a terminator line).
The code in
<FileName>
../src/bin/psql/psql.c
</FileName>
contains routines that correctly handle  the  copy protocol.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQgetlineAsync</Function>
          Reads  a  newline-terminated  line  of  characters
          (transmitted  by the backend server) into a buffer
          without blocking.
<synopsis>
int PQgetlineAsync(PGconn *conn,
                   char *buffer,
                   int bufsize)
</synopsis>
This routine is similar to PQgetline, but it can be used by applications
that must read COPY data asynchronously, that is without blocking.
Having issued the COPY command and gotten a PGRES_COPY_OUT response, the
application should call PQconsumeInput and PQgetlineAsync until the
end-of-data signal is detected.  Unlike PQgetline, this routine takes
responsibility for detecting end-of-data.
On each call, PQgetlineAsync will return data if a complete newline-
terminated data line is available in libpq's input buffer, or if the
incoming data line is too long to fit in the buffer offered by the caller.
Otherwise, no data is returned until the rest of the line arrives.
The routine returns -1 if the end-of-copy-data marker has been recognized,
or 0 if no data is available, or a positive number giving the number of
bytes of data returned.  If -1 is returned, the caller must next call
PQendcopy, and then return to normal processing.
The data returned will not extend beyond a newline character.  If possible
a whole line will be returned at one time.  But if the buffer offered by
the caller is too small to hold a line sent by the backend, then a partial
data line will be returned.  This can be detected by testing whether the
last returned byte is '\n' or not.
The returned string is not null-terminated.  (If you want to add a
terminating null, be sure to pass a bufsize one smaller than the room
actually available.)
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQputline</Function>
Sends  a  null-terminated  string  to  the backend server.
Returns 0 if OK, EOF if unable to send the string.
<synopsis>
int PQputline(PGconn *conn,
              char *string);
</synopsis>
Note the application must explicitly  send  the  two
characters  "\." on a final line  to indicate to the backend that it
has finished sending its data.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQputnbytes</Function>
Sends  a  non-null-terminated  string  to  the backend server.
Returns 0 if OK, EOF if unable to send the string.
<synopsis>
int PQputnbytes(PGconn *conn,
                const char *buffer,
                int nbytes);
</synopsis>
This is exactly like PQputline, except that the data buffer need
not be null-terminated since the number of bytes to send is
specified directly.
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQendcopy</Function>
          Syncs with the backend.  This function waits until
          the  backend  has  finished  the  copy.  It should
          either be issued when the  last  string  has  been
          sent  to  the  backend using PQputline or when the
          last string has been  received  from  the  backend
          using PGgetline.  It must be issued or the backend
          may get "out of sync"  with  the  frontend.   Upon
          return from this function, the backend is ready to
          receive the next query.
          The return value is 0  on  successful  completion,
          nonzero otherwise.
<synopsis>
int PQendcopy(PGconn *conn);
</synopsis>

<Para>
As an example:

<ProgramListing>
PQexec(conn, "create table foo (a int4, b char16, d float8)");
PQexec(conn, "copy foo from stdin");
PQputline(conn, "3&lt;TAB&gt;hello world&lt;TAB&gt;4.5\n");
PQputline(conn,"4&lt;TAB&gt;goodbye world&lt;TAB&gt;7.11\n");
...
PQputline(conn,"\\.\n");
PQendcopy(conn);
</ProgramListing>
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
When using PQgetResult, the application should respond to
a PGRES_COPY_OUT result by executing PQgetline repeatedly,
followed by PQendcopy after the terminator line is seen.
It should then return to the PQgetResult loop until PQgetResult
returns NULL.  Similarly a PGRES_COPY_IN result is processed
by a series of PQputline calls followed by PQendcopy, then
return to the PQgetResult loop.  This arrangement will ensure that
a copy in or copy out command embedded in a series of SQL commands
will be executed correctly.
Older applications are likely to submit a copy in or copy out
via PQexec and assume that the transaction is done after PQendcopy.
This will work correctly only if the copy in/out is the only
SQL command in the query string.
</Para>

</Sect1>

<Sect1>
<Title><FileName>libpq</FileName> Tracing Functions</Title>

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>PQtrace</Function>
          Enable  tracing of the frontend/backend communication to a debugging file stream.
<synopsis>
void PQtrace(PGconn *conn
             FILE *debug_port)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>PQuntrace</Function>
          Disable tracing started by PQtrace
<synopsis>
void PQuntrace(PGconn *conn)
</synopsis>
</Para>
</ListItem>
</ItemizedList>
</Para>

</Sect1>

<Sect1>
<Title>
<FileName>libpq</FileName> Control Functions</Title>

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>PQsetNoticeProcessor</Function>
Control reporting of notice and warning messages generated by libpq.
<synopsis>
void PQsetNoticeProcessor (PGconn * conn,
        void (*noticeProcessor) (void * arg, const char * message),
        void * arg)
</synopsis>
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
By default, <filename>libpq</filename> prints "notice" messages from the backend on stderr,
as well as a few error messages that it generates by itself.
This behavior can be overridden by supplying a callback function that
does something else with the messages.  The callback function is passed
the text of the error message (which includes a trailing newline), plus
a void pointer that is the same one passed to <function>PQsetNoticeProcessor</function>.
(This pointer can be used to access application-specific state if needed.)
The default notice processor is simply
<ProgramListing>
static void
defaultNoticeProcessor(void * arg, const char * message)
{
    fprintf(stderr, "%s", message);
}
</ProgramListing>

<Para>
To use a special notice processor, call <function>PQsetNoticeProcessor</function> just after
any creation of a new PGconn object.

</Sect1>

<Sect1>
<Title>User Authentication Functions</Title>

<Para>
The frontend/backend authentication process is  handled
by  <Function>PQconnectdb</Function>  without any further intervention.
The authentication method is now
determined entirely by the DBA (see pga_hba.conf(5)).  The following
routines no longer have any effect and should not be used.
</Para>

<Para>
<ItemizedList>
<ListItem>
<Para>
<Function>fe_getauthname</Function>
          Returns a pointer to static space containing whatever name the user has authenticated.  Use of this
          routine  in  place  of calls to getenv(3) or getpwuid(3) by applications is highly recommended,  as
          it  is  entirely  possible  that the authenticated
          user name is not the same as  value  of  the  <Acronym>USER</Acronym>
          environment   variable  or  the  user's  entry  in
          <FileName>/etc/passwd</FileName>.
<synopsis>
char *fe_getauthname(char* errorMessage)
</synopsis>
</Para>
</ListItem>

<ListItem>
<Para>
<Function>fe_setauthsvc</Function>
          Specifies that  <FileName>libpq</FileName>  should  use  authentication
          service  name rather than its compiled-in default.
          This value is typically taken from a  command-line
          switch.
<synopsis>
void fe_setauthsvc(char *name,
                   char* errorMessage)
</synopsis>
          Any   error   messages   from  the  authentication
          attempts are returned in  the  errorMessage  argument.
</Para>
</ListItem>
</ItemizedList>
</Para>

</Sect1>

<Sect1 id="libpq-envars">
<Title>Environment Variables</Title>

<Para>
The following environment variables can be used to select default
connection parameter values, which will be used by PQconnectdb or
PQsetdbLogin if no value is directly specified by the calling code.
These are useful to avoid hard-coding database names into simple
application programs.

<ItemizedList>
<ListItem>
<Para>
<Acronym>PGHOST</Acronym> sets the default server name.
If a non-zero-length string is specified, TCP/IP communication is used.
Without a host name, libpq will connect using a local Unix domain socket.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGPORT</Acronym>  sets the default port or local Unix domain socket
file extension for communicating with the <ProductName>Postgres</ProductName>
backend.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGDATABASE</Acronym>  sets the default 
<ProductName>Postgres</ProductName> database name.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGUSER</Acronym>
sets the username used to connect to the database and for authentication.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGPASSWORD</Acronym>
sets the password used if the backend demands password authentication.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGREALM</Acronym> sets the Kerberos realm to  use  with  
<ProductName>Postgres</ProductName>,
  if  it is different from the local realm.  If
<Acronym>PGREALM</Acronym> is set, <ProductName>Postgres</ProductName> 
applications  will  attempt
        authentication  with  servers for this realm and use
        separate ticket files to avoid conflicts with  local
        ticket  files.   This  environment  variable is only
        used if Kerberos authentication is selected by the backend.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGOPTIONS</Acronym> sets additional runtime  options  for  
the <ProductName>Postgres</ProductName> backend.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGTTY</Acronym> sets the file or tty on which  debugging  
messages from the backend server are displayed.
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
The following environment variables can be used to specify user-level default
behavior for every Postgres session:

<ItemizedList>
<ListItem>
<Para>
<Acronym>PGDATESTYLE</Acronym>
sets the default style of date/time representation.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGTZ</Acronym>
sets the default time zone.
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
The following environment variables can be used to specify default internal
behavior for every Postgres session:

<ItemizedList>
<ListItem>
<Para>
<Acronym>PGGEQO</Acronym>
sets the default mode for the genetic optimizer.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGRPLANS</Acronym>
sets the default mode to allow or disable right-sided plans in the optimizer.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGCOSTHEAP</Acronym>
sets the default cost for heap searches for the optimizer.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGCOSTINDEX</Acronym>
sets the default cost for indexed searches for the optimizer.
</Para>
</ListItem>
<ListItem>
<Para>
<Acronym>PGQUERY_LIMIT</Acronym>
sets the maximum number of rows returned by a query.
</Para>
</ListItem>
</ItemizedList>
</Para>

<Para>
Refer to the <command>SET</command> <acronym>SQL</acronym> command
for information on correct values for these environment variables.
</Para>

</Sect1>

<Sect1>
<Title>Caveats</Title>

<Para>
     The  query  buffer is 8192 bytes long, and queries over
     that length will be rejected.
</Para>
</Sect1>

<Sect1>
<Title>Sample Programs</Title>

<Sect2>
<Title>Sample Program 1</Title>

<Para>
<ProgramListing>
/*
 * testlibpq.c Test the C version of Libpq, the Postgres frontend
 * library.
 *
 *
 */
#include &lt;stdio.h&gt;
#include "libpq-fe.h"

void
exit_nicely(PGconn *conn)
{
    PQfinish(conn);
    exit(1);
}

main()
{
    char       *pghost,
               *pgport,
               *pgoptions,
               *pgtty;
    char       *dbName;
    int         nFields;
    int         i,
                j;

    /* FILE *debug; */

    PGconn     *conn;
    PGresult   *res;

    /*
     * begin, by setting the parameters for a backend connection if the
     * parameters are null, then the system will try to use reasonable
     * defaults by looking up environment variables or, failing that,
     * using hardwired constants
     */
    pghost = NULL;              /* host name of the backend server */
    pgport = NULL;              /* port of the backend server */
    pgoptions = NULL;           /* special options to start up the backend
                                 * server */
    pgtty = NULL;               /* debugging tty for the backend server */
    dbName = "template1";

    /* make a connection to the database */
    conn = PQsetdb(pghost, pgport, pgoptions, pgtty, dbName);

    /*
     * check to see that the backend connection was successfully made
     */
    if (PQstatus(conn) == CONNECTION_BAD)
    {
        fprintf(stderr, "Connection to database '&percnt;s' failed.\n", dbName);
        fprintf(stderr, "&percnt;s", PQerrorMessage(conn));
        exit_nicely(conn);
    }

    /* debug = fopen("/tmp/trace.out","w"); */
    /* PQtrace(conn, debug);  */

    /* start a transaction block */
    res = PQexec(conn, "BEGIN");
    if (PQresultStatus(res) != PGRES_COMMAND_OK)
    {
        fprintf(stderr, "BEGIN command failed\n");
        PQclear(res);
        exit_nicely(conn);
    }

    /*
     * should PQclear PGresult whenever it is no longer needed to avoid
     * memory leaks
     */
    PQclear(res);

    /*
     * fetch instances from the pg_database, the system catalog of
     * databases
     */
    res = PQexec(conn, "DECLARE mycursor CURSOR FOR select * from pg_database");
    if (PQresultStatus(res) != PGRES_COMMAND_OK)
    {
        fprintf(stderr, "DECLARE CURSOR command failed\n");
        PQclear(res);
        exit_nicely(conn);
    }
    PQclear(res);

    res = PQexec(conn, "FETCH ALL in mycursor");
    if (PQresultStatus(res) != PGRES_TUPLES_OK)
    {
        fprintf(stderr, "FETCH ALL command didn't return tuples properly\n");
        PQclear(res);
        exit_nicely(conn);
    }

    /* first, print out the attribute names */
    nFields = PQnfields(res);
    for (i = 0; i &lt; nFields; i++)
        printf("&percnt;-15s", PQfname(res, i));
    printf("\n\n");

    /* next, print out the instances */
    for (i = 0; i &lt; PQntuples(res); i++)
    {
        for (j = 0; j &lt; nFields; j++)
            printf("&percnt;-15s", PQgetvalue(res, i, j));
        printf("\n");
    }

    PQclear(res);

    /* close the cursor */
    res = PQexec(conn, "CLOSE mycursor");
    PQclear(res);

    /* commit the transaction */
    res = PQexec(conn, "COMMIT");
    PQclear(res);

    /* close the connection to the database and cleanup */
    PQfinish(conn);

    /* fclose(debug); */
}
</ProgramListing>
</Para>
</Sect2>

<Sect2>
<Title>Sample Program 2</Title>

<Para>
<ProgramListing>
/*
 * testlibpq2.c Test of the asynchronous notification interface
 *
 * populate a database with the following:
 *
 * CREATE TABLE TBL1 (i int4);
 *
 * CREATE TABLE TBL2 (i int4);
 *
 * CREATE RULE r1 AS ON INSERT TO TBL1 DO [INSERT INTO TBL2 values
 * (new.i); NOTIFY TBL2];
 *
 * Then start up this program After the program has begun, do
 *
 * INSERT INTO TBL1 values (10);
 *
 *
 *
 */
#include &lt;stdio.h&gt;
#include "libpq-fe.h"

void
exit_nicely(PGconn *conn)
{
    PQfinish(conn);
    exit(1);
}

main()
{
    char       *pghost,
               *pgport,
               *pgoptions,
               *pgtty;
    char       *dbName;
    int         nFields;
    int         i,
                j;

    PGconn     *conn;
    PGresult   *res;
    PGnotify   *notify;

    /*
     * begin, by setting the parameters for a backend connection if the
     * parameters are null, then the system will try to use reasonable
     * defaults by looking up environment variables or, failing that,
     * using hardwired constants
     */
    pghost = NULL;              /* host name of the backend server */
    pgport = NULL;              /* port of the backend server */
    pgoptions = NULL;           /* special options to start up the backend
                                 * server */
    pgtty = NULL;               /* debugging tty for the backend server */
    dbName = getenv("USER");    /* change this to the name of your test
                                 * database */

    /* make a connection to the database */
    conn = PQsetdb(pghost, pgport, pgoptions, pgtty, dbName);

    /*
     * check to see that the backend connection was successfully made
     */
    if (PQstatus(conn) == CONNECTION_BAD)
    {
        fprintf(stderr, "Connection to database '&percnt;s' failed.\n", dbName);
        fprintf(stderr, "&percnt;s", PQerrorMessage(conn));
        exit_nicely(conn);
    }

    res = PQexec(conn, "LISTEN TBL2");
    if (PQresultStatus(res) != PGRES_COMMAND_OK)
    {
        fprintf(stderr, "LISTEN command failed\n");
        PQclear(res);
        exit_nicely(conn);
    }

    /*
     * should PQclear PGresult whenever it is no longer needed to avoid
     * memory leaks
     */
    PQclear(res);

    while (1)
    {

        /*
         * wait a little bit between checks; waiting with select()
         * would be more efficient.
         */
        sleep(1);
        /* collect any asynchronous backend messages */
        PQconsumeInput(conn);
        /* check for asynchronous notify messages */
        while ((notify = PQnotifies(conn)) != NULL)
        {
            fprintf(stderr,
                 "ASYNC NOTIFY of '&percnt;s' from backend pid '&percnt;d' received\n",
                    notify-&gt;relname, notify-&gt;be_pid);
            free(notify);
        }
    }

    /* close the connection to the database and cleanup */
    PQfinish(conn);

}
</ProgramListing>
</Para>
</Sect2>

<Sect2>
<Title>Sample Program 3</Title>

<Para>
<ProgramListing>
/*
 * testlibpq3.c Test the C version of Libpq, the Postgres frontend
 * library. tests the binary cursor interface
 *
 *
 *
 * populate a database by doing the following:
 *
 * CREATE TABLE test1 (i int4, d float4, p polygon);
 *
 * INSERT INTO test1 values (1, 3.567, '(3.0, 4.0, 1.0,
 * 2.0)'::polygon);
 *
 * INSERT INTO test1 values (2, 89.05, '(4.0, 3.0, 2.0,
 * 1.0)'::polygon);
 *
 * the expected output is:
 *
 * tuple 0: got i = (4 bytes) 1, d = (4 bytes) 3.567000, p = (4
 * bytes) 2 points   boundbox = (hi=3.000000/4.000000, lo =
 * 1.000000,2.000000) tuple 1: got i = (4 bytes) 2, d = (4 bytes)
 * 89.050003, p = (4 bytes) 2 points   boundbox =
 * (hi=4.000000/3.000000, lo = 2.000000,1.000000)
 *
 *
 */
#include &lt;stdio.h&gt;
#include "libpq-fe.h"
#include "utils/geo-decls.h"    /* for the POLYGON type */

void
exit_nicely(PGconn *conn)
{
    PQfinish(conn);
    exit(1);
}

main()
{
    char       *pghost,
               *pgport,
               *pgoptions,
               *pgtty;
    char       *dbName;
    int         nFields;
    int         i,
                j;
    int         i_fnum,
                d_fnum,
                p_fnum;
    PGconn     *conn;
    PGresult   *res;

    /*
     * begin, by setting the parameters for a backend connection if the
     * parameters are null, then the system will try to use reasonable
     * defaults by looking up environment variables or, failing that,
     * using hardwired constants
     */
    pghost = NULL;              /* host name of the backend server */
    pgport = NULL;              /* port of the backend server */
    pgoptions = NULL;           /* special options to start up the backend
                                 * server */
    pgtty = NULL;               /* debugging tty for the backend server */

    dbName = getenv("USER");    /* change this to the name of your test
                                 * database */

    /* make a connection to the database */
    conn = PQsetdb(pghost, pgport, pgoptions, pgtty, dbName);

    /*
     * check to see that the backend connection was successfully made
     */
    if (PQstatus(conn) == CONNECTION_BAD)
    {
        fprintf(stderr, "Connection to database '&percnt;s' failed.\n", dbName);
        fprintf(stderr, "&percnt;s", PQerrorMessage(conn));
        exit_nicely(conn);
    }

    /* start a transaction block */
    res = PQexec(conn, "BEGIN");
    if (PQresultStatus(res) != PGRES_COMMAND_OK)
    {
        fprintf(stderr, "BEGIN command failed\n");
        PQclear(res);
        exit_nicely(conn);
    }

    /*
     * should PQclear PGresult whenever it is no longer needed to avoid
     * memory leaks
     */
    PQclear(res);

    /*
     * fetch instances from the pg_database, the system catalog of
     * databases
     */
    res = PQexec(conn, "DECLARE mycursor BINARY CURSOR FOR select * from test1");
    if (PQresultStatus(res) != PGRES_COMMAND_OK)
    {
        fprintf(stderr, "DECLARE CURSOR command failed\n");
        PQclear(res);
        exit_nicely(conn);
    }
    PQclear(res);

    res = PQexec(conn, "FETCH ALL in mycursor");
    if (PQresultStatus(res) != PGRES_TUPLES_OK)
    {
        fprintf(stderr, "FETCH ALL command didn't return tuples properly\n");
        PQclear(res);
        exit_nicely(conn);
    }

    i_fnum = PQfnumber(res, "i");
    d_fnum = PQfnumber(res, "d");
    p_fnum = PQfnumber(res, "p");

    for (i = 0; i &lt; 3; i++)
    {
        printf("type[&percnt;d] = &percnt;d, size[&percnt;d] = &percnt;d\n",
               i, PQftype(res, i),
               i, PQfsize(res, i));
    }
    for (i = 0; i &lt; PQntuples(res); i++)
    {
        int        *ival;
        float      *dval;
        int         plen;
        POLYGON    *pval;

        /* we hard-wire this to the 3 fields we know about */
        ival = (int *) PQgetvalue(res, i, i_fnum);
        dval = (float *) PQgetvalue(res, i, d_fnum);
        plen = PQgetlength(res, i, p_fnum);

        /*
         * plen doesn't include the length field so need to
         * increment by VARHDSZ
         */
        pval = (POLYGON *) malloc(plen + VARHDRSZ);
        pval-&gt;size = plen;
        memmove((char *) &pval-&gt;npts, PQgetvalue(res, i, p_fnum), plen);
        printf("tuple &percnt;d: got\n", i);
        printf(" i = (&percnt;d bytes) &percnt;d,\n",
               PQgetlength(res, i, i_fnum), *ival);
        printf(" d = (&percnt;d bytes) &percnt;f,\n",
               PQgetlength(res, i, d_fnum), *dval);
        printf(" p = (&percnt;d bytes) &percnt;d points \tboundbox = (hi=&percnt;f/&percnt;f, lo = &percnt;f,&percnt;f)\n",
               PQgetlength(res, i, d_fnum),
               pval-&gt;npts,
               pval-&gt;boundbox.xh,
               pval-&gt;boundbox.yh,
               pval-&gt;boundbox.xl,
               pval-&gt;boundbox.yl);
    }
    PQclear(res);

    /* close the cursor */
    res = PQexec(conn, "CLOSE mycursor");
    PQclear(res);

    /* commit the transaction */
    res = PQexec(conn, "COMMIT");
    PQclear(res);

    /* close the connection to the database and cleanup */
    PQfinish(conn);

}
</ProgramListing>
<Para>

</Sect2>
</Sect1>
</Chapter>
