<!-- $PostgreSQL: pgsql/doc/src/sgml/textsearch.sgml,v 1.18 2007/10/10 21:48:22 neilc Exp $ -->

<chapter id="textsearch">
 <title id="textsearch-title">Full Text Search</title>

  <indexterm zone="textsearch">
   <primary>full text search</primary>
  </indexterm>

  <indexterm zone="textsearch">
   <primary>text search</primary>
  </indexterm>

 <sect1 id="textsearch-intro">
  <title>Introduction</title>

  <para>
   Full Text Searching (or just <firstterm>text search</firstterm>) allows
   identifying documents that satisfy a <firstterm>query</firstterm>, and
   optionally sorting them by relevance to the query. The most common search
   is to find all documents containing given <firstterm>query terms</firstterm>
   and return them in order of their <firstterm>similarity</firstterm> to the
   <varname>query</varname>.  Notions of <varname>query</varname> and
   <varname>similarity</varname> are very flexible and depend on the specific
   application. The simplest search considers <varname>query</varname> as a
   set of words and <varname>similarity</varname> as the frequency of query
   words in the document.  Full text indexing can be done inside the
   database or outside.  Doing indexing inside the database allows easy access
   to document metadata to assist in indexing and display.
  </para>

  <para>
   Textual search operators have existed in databases for years.
   <productname>PostgreSQL</productname> has
   <literal>~</literal>,<literal>~*</literal>, <literal>LIKE</literal>,
   <literal>ILIKE</literal> operators for textual datatypes, but they lack
   many essential properties required by modern information systems:
  </para>

  <itemizedlist  spacing="compact" mark="bullet">
   <listitem>
    <para>
     There is no linguistic support, even for English.  Regular expressions are
     not sufficient because they cannot easily handle derived words,
     e.g., <literal>satisfies</literal> and <literal>satisfy</literal>. You might
     miss documents which contain <literal>satisfies</literal>, although you
     probably would like to find them when searching for
     <literal>satisfy</literal>. It is possible to use <literal>OR</literal>
     to search <emphasis>any</emphasis> of them, but it is tedious and error-prone
     (some words can have several thousand derivatives).
    </para>
   </listitem>

   <listitem>
    <para>
     They provide no ordering (ranking) of search results, which makes them
     ineffective when thousands of matching documents are found.
    </para>
   </listitem>

   <listitem>
    <para>
     They tend to be slow because they process all documents for every search and
     there is no index support.
    </para>
   </listitem>
  </itemizedlist>

  <para>
   Full text indexing allows documents to be <emphasis>preprocessed</emphasis>
   and an index saved for later rapid searching. Preprocessing includes:
  </para>

  <itemizedlist  mark="none">
   <listitem>
    <para>
     <emphasis>Parsing documents into <firstterm>lexemes</></emphasis>. It is
     useful to identify various classes of lexemes, e.g. digits, words,
     complex words, email addresses, so that they can be processed
     differently.  In principle lexeme classes depend on the specific
     application but for an ordinary search it is useful to have a predefined
     set of classes.
     <productname>PostgreSQL</productname> uses a <firstterm>parser</> to
     perform this step.  A standard parser is provided, and custom parsers
     can be created for specific needs.
    </para>
   </listitem>

   <listitem>
    <para>
     <emphasis>Converting lexemes into <firstterm>normalized
     form</></emphasis>.  This allows searches to find variant forms of the
     same word, without tediously entering all the possible variants.
     Also, this step typically eliminates <firstterm>stop words</>, which
     are words that are so common that they are useless for searching.
     <productname>PostgreSQL</productname> uses <firstterm>dictionaries</> to
     perform this step.  Various standard dictionaries are provided, and
     custom ones can be created for specific needs.
    </para>
   </listitem>

   <listitem>
    <para>
     <emphasis>Storing preprocessed documents optimized for
     searching</emphasis>.  For example, each document can be represented
     as a sorted array of normalized lexemes. Along with the lexemes it is
     desirable to store positional information to use for <firstterm>proximity
     ranking</firstterm>, so that a document which contains a more
     <quote>dense</> region of query words is 
     assigned a higher rank than one with scattered query words.
    </para>
   </listitem>
  </itemizedlist>

  <para>
   Dictionaries allow fine-grained control over how lexemes are normalized.
   With dictionaries you can:
  </para>

  <itemizedlist  spacing="compact" mark="bullet">
   <listitem>
    <para>
     Define stop words that should not be indexed.
    </para>
   </listitem>

   <listitem>
    <para>
     Map synonyms to a single word using <application>ispell</>.
    </para>
   </listitem>

   <listitem>
    <para>
     Map phrases to a single word using a thesaurus.
    </para>
   </listitem>

   <listitem>
    <para>
     Map different variations of a word to a canonical form using
     an <application>ispell</> dictionary.
    </para>
   </listitem>

   <listitem>
    <para>
     Map different variations of a word to a canonical form using
     <application>snowball</> stemmer rules.
    </para>
   </listitem>
  </itemizedlist>

  <para>
   A data type <type>tsvector</type> is provided for storing preprocessed
   documents, along with a type <type>tsquery</type> for representing processed
   queries (<xref linkend="datatype-textsearch">).  Also, a full text search
   operator <literal>@@</literal> is defined for these data types (<xref
   linkend="textsearch-searches">).  Full text searches can be accelerated
   using indexes (<xref linkend="textsearch-indexes">).
  </para>


  <sect2 id="textsearch-document">
   <title>What Is a <firstterm>Document</firstterm>?</title>

   <indexterm zone="textsearch-document">
    <primary>text search</primary>
    <secondary>document</secondary>
   </indexterm>

   <para>
    A <firstterm>document</> is the unit of searching in a full text search
    system; for example, a magazine article or email message.  The text search
    engine must be able to parse documents and store associations of lexemes
    (key words) with their parent document. Later, these associations are
    used to search for documents which contain query words.
   </para>

   <para>
    For searches within <productname>PostgreSQL</productname>,
    a document is normally a textual field within a row of a database table,
    or possibly a combination (concatenation) of such fields, perhaps stored
    in several tables or obtained dynamically. In other words, a document can
    be constructed from different parts for indexing and it might not be
    stored anywhere as a whole. For example:

<programlisting>
SELECT title || ' ' ||  author || ' ' ||  abstract || ' ' || body AS document
FROM messages
WHERE mid = 12;

SELECT m.title || ' ' || m.author || ' ' || m.abstract || ' ' || d.body AS document
FROM messages m, docs d
WHERE mid = did AND mid = 12;
</programlisting>
   </para>

   <note>
    <para>
     Actually, in the previous example queries, <literal>COALESCE</literal>
     <!-- TODO make this a link? -->
     should be used to prevent a simgle <literal>NULL</literal> attribute from
     causing a <literal>NULL</literal> result for the whole document.
    </para>
   </note>

   <para>
    Another possibility is to store the documents as simple text files in the
    file system. In this case, the database can be used to store the full text
    index and to execute searches, and some unique identifier can be used to
    retrieve the document from the file system.  However, retrieving files
    from outside the database requires superuser permissions or special
    function support, so this is usually less convenient than keeping all
    the data inside <productname>PostgreSQL</productname>.
   </para>
  </sect2>

  <sect2 id="textsearch-searches">
   <title>Performing Searches</title>

   <para>
    Full text searching in <productname>PostgreSQL</productname> is based on
    the operator <literal>@@</literal>, which tests whether a <type>tsvector</type>
    (document) matches a <type>tsquery</type> (query).  Also, this operator
    supports <type>text</type> input, allowing explicit conversion of a text
    string to <type>tsvector</type> to be skipped.  The variants available
    are:

<programlisting>
tsvector @@ tsquery
tsquery  @@ tsvector
text @@ tsquery
text @@ text
</programlisting>
   </para>

   <para>
    The match operator <literal>@@</literal> returns <literal>true</literal> if
    the <type>tsvector</type> matches the <type>tsquery</type>.  It doesn't
    matter which data type is written first:

<programlisting>
SELECT 'cat &amp; rat'::tsquery @@ 'a fat cat sat on a mat and ate a fat rat'::tsvector;
 ?column?
----------
 t

SELECT 'fat &amp; cow'::tsquery @@ 'a fat cat sat on a mat and ate a fat rat'::tsvector;
 ?column?
----------
 f
</programlisting>
   </para>

   <para>
    The form <type>text</type> <literal>@@</literal> <type>tsquery</type>
    is equivalent to <literal>to_tsvector(x) @@ y</literal>.
    The form <type>text</type> <literal>@@</literal> <type>text</type>
    is equivalent to <literal>to_tsvector(x) @@ plainto_tsquery(y)</literal>.
    <xref linkend="functions-textsearch"> contains a complete list of full text
    search functions and operators.
   </para>
  </sect2>

  <sect2 id="textsearch-configurations">
   <title>Configurations</title>

   <indexterm zone="textsearch-configurations">
    <primary>text search</primary>
    <secondary>configurations</secondary>
   </indexterm>

   <para>
    The above are all simple text search examples.  As mentioned before, full
    text search functionality includes the ability to do many more things:
    skip indexing certain words (stop words), process synonyms, and use
    sophisticated parsing, e.g. parse based on more than just white space.
    This functionality is controlled by <emphasis>configurations</>.
    Fortunately, <productname>PostgreSQL</> comes with predefined
    configurations for many languages.  (<application>psql</>'s <command>\dF</>
    shows all predefined configurations.)
   </para>

   <para>
    During installation an appropriate configuration was selected and
    <xref linkend="guc-default-text-search-config"> was set accordingly
    in <filename>postgresql.conf</>.  If you are using the same text search
    configuration for the entire cluster you can use the value in
    <filename>postgresql.conf</>.  If using different configurations
    throughout the cluster but
    the same text search configuration for any one database,
    use <command>ALTER DATABASE ... SET</>.  If not, you must set <varname>
    default_text_search_config</varname> in each session.  Many functions
    also take an optional configuration name.
   </para>

  </sect2>

 </sect1>

 <sect1 id="textsearch-tables">
  <title>Tables and Indexes</title>

  <para>
   The previous section described how to perform full text searches using
   constant strings.  This section shows how to search table data, optionally
   using indexes.
  </para>

  <sect2 id="textsearch-tables-search">
   <title>Searching a Table</title>

   <para>
    It is possible to do full text table search with no index.  A simple query
    to find all <literal>title</> entries that contain the word
    <literal>friend</> is:

<programlisting>
SELECT title
FROM pgweb
WHERE to_tsvector('english', body) @@ to_tsquery('friend')
</programlisting>
   </para>

   <para>
    The query above uses the <literal>english</> the configuration set by <xref
    linkend="guc-default-text-search-config">.  A more complex query is to
    select the ten most recent documents which contain <literal>create</> and
    <literal>table</> in the <literal>title</> or <literal>body</>:

<programlisting>
SELECT title
FROM pgweb
WHERE to_tsvector('english', title || body) @@ to_tsquery('create &amp; table')
ORDER BY dlm DESC LIMIT 10;
</programlisting>

    <literal>dlm</> is the last-modified date so we
    used <command>ORDER BY dlm LIMIT 10</> to get the ten most recent
    matches.  For clarity we omitted the <function>coalesce</function> function
    which prevents the unwanted effect of <literal>NULL</literal>
    concatenation.
   </para>

  </sect2>

  <sect2 id="textsearch-tables-index">
   <title>Creating Indexes</title>

   <para>
    We can create a <acronym>GIN</acronym> (<xref
    linkend="textsearch-indexes">) index to speed up the search:

<programlisting>
CREATE INDEX pgweb_idx ON pgweb USING gin(to_tsvector('english', body));
</programlisting>

   Notice that the 2-argument version of <function>to_tsvector</function> is
    used.  Only text search functions which specify a configuration name can
    be used in expression indexes (<xref linkend="indexes-expressional">).
    This is because the index contents must be unaffected by <xref
    linkend="guc-default-text-search-config">.  If they were affected, the
    index contents might be inconsistent because different entries could
    contain <type>tsvector</>s that were created with different text search
    configurations, and there would be no way to guess which was which.  It
    would be impossible to dump and restore such an index correctly.
   </para>

   <para>
    Because the two-argument version of <function>to_tsvector</function> was
    used in the index above, only a query reference that uses the 2-argument
    version of <function>to_tsvector</function> with the same configuration
    name will use that index, i.e. <literal>WHERE 'a &amp; b' @@
    to_svector('english', body)</> will use the index, but <literal>WHERE
    'a &amp; b' @@ to_svector(body))</> and <literal>WHERE 'a &amp; b' @@
    body::tsvector</> will not.  This guarantees that an index will be used
    only with the same configuration used to create the index rows.
   </para>

  <para>
    It is possible to setup more complex expression indexes where the
    configuration name is specified by another column, e.g.:

<programlisting>
CREATE INDEX pgweb_idx ON pgweb USING gin(to_tsvector(config_name, body));
</programlisting>

    where <literal>config_name</> is a column in the <literal>pgweb</>
    table.  This allows mixed configurations in the same index while
    recording which configuration was used for each index row.
   </para>

   <para>
    Indexes can even concatenate columns:

<programlisting>
CREATE INDEX pgweb_idx ON pgweb USING gin(to_tsvector('english', title || body));
</programlisting>
   </para>

   <para>
    A more complex case is to create a separate <type>tsvector</> column
    to hold the output of <function>to_tsvector()</>.  This example is a
    concatenation of <literal>title</literal> and <literal>body</literal>,
    with ranking information.  We assign different labels to them to encode
    information about the origin of each word:

<programlisting>
ALTER TABLE pgweb ADD COLUMN textsearch_index tsvector;
UPDATE pgweb SET textsearch_index =
     setweight(to_tsvector('english', coalesce(title,'')), 'A') || ' ' ||
     setweight(to_tsvector('english', coalesce(body,'')),'D');
</programlisting>

    Then we create a <acronym>GIN</acronym> index to speed up the search:

<programlisting>
CREATE INDEX textsearch_idx ON pgweb USING gin(textsearch_index);
</programlisting>

    After vacuuming, we are ready to perform a fast full text search:

<programlisting>
SELECT ts_rank_cd(textsearch_index, q) AS rank, title
FROM pgweb, to_tsquery('create &amp; table') q
WHERE q @@ textsearch_index
ORDER BY rank DESC LIMIT 10;
</programlisting>

    It is necessary to create a trigger to keep the new <type>tsvector</>
    column current anytime <literal>title</> or <literal>body</> changes.
    Keep in mind that, just like with expression indexes, it is important to
    specify the configuration name when creating text search data types
    inside triggers so the column's contents are not affected by changes to
    <varname>default_text_search_config</>.
   </para>

  </sect2>

 </sect1>

 <sect1 id="textsearch-controls">
  <title>Additional Controls</title>

  <para>
   To implement full text searching there must be a function to create a
   <type>tsvector</type> from a document and a <type>tsquery</type> from a
   user query. Also, we need to return results in some order, i.e., we need
   a function which compares documents with respect to their relevance to
   the <type>tsquery</type>.  Full text searching in
   <productname>PostgreSQL</productname> provides support for all of these
   functions.
  </para>

  <sect2 id="textsearch-parser">
   <title>Parsing</title>

   <indexterm zone="textsearch-parser">
    <primary>text search</primary>
    <secondary>parse</secondary>
   </indexterm>

   <para>
    Full text searching in <productname>PostgreSQL</productname> provides
    function <function>to_tsvector</function>, which converts a document to
    the <type>tsvector</type> data type. More details are available in <xref
    linkend="functions-textsearch-tsvector">, but for now consider a simple example:

<programlisting>
SELECT to_tsvector('english', 'a fat  cat sat on a mat - it ate a fat rats');
                  to_tsvector
-----------------------------------------------------
 'ate':9 'cat':3 'fat':2,11 'mat':7 'rat':12 'sat':4
</programlisting>
   </para>

   <para>
    In the example above we see that the resulting <type>tsvector</type> does not
    contain the words <literal>a</literal>, <literal>on</literal>, or
    <literal>it</literal>, the word <literal>rats</literal> became
    <literal>rat</literal>, and the punctuation sign <literal>-</literal> was
    ignored.
   </para>

   <para>
    The <function>to_tsvector</function> function internally calls a parser
    which breaks the document (<literal>a fat  cat sat on a mat - it ate a
    fat rats</literal>) into words and corresponding types. The default parser
    recognizes 23 types.  Each word, depending on its type, passes through a
    group of dictionaries (<xref linkend="textsearch-dictionaries">).  At the
    end of this step we obtain <emphasis>lexemes</emphasis>.  For example,
    <literal>rats</literal> became <literal>rat</literal> because one of the
    dictionaries recognized that the word <literal>rats</literal> is a plural
    form of <literal>rat</literal>.  Some words are treated as "stop words"
    (<xref linkend="textsearch-stopwords">) and ignored since they occur too
    frequently and have little informational value.  In our example these are
    <literal>a</literal>, <literal>on</literal>, and <literal>it</literal>.
    The punctuation sign <literal>-</literal> was also ignored because its
    type (<literal>Space symbols</literal>) is not indexed. All information
    about the parser, dictionaries and what types of lexemes to index is
    documented in the full text configuration section (<xref
    linkend="textsearch-tables-configuration">).  It is possible to have
    several different configurations in the same database, and many predefined
    system configurations are available for different languages. In our example
    we used the default configuration <literal>english</literal> for the
    English language.
   </para>

   <para>
    As another example, below is the output from the <function>ts_debug</function>
    function ( <xref linkend="textsearch-debugging"> ), which shows all details
    of the full text machinery:

<programlisting>
SELECT * FROM ts_debug('english','a fat  cat sat on a mat - it ate a fat rats');
 Alias |  Description  | Token | Dictionaries | Lexized token
-------+---------------+-------+--------------+----------------
 lword | Latin word    | a     | {english}    | english: {}
 blank | Space symbols |       |              |
 lword | Latin word    | fat   | {english}    | english: {fat}
 blank | Space symbols |       |              |
 lword | Latin word    | cat   | {english}    | english: {cat}
 blank | Space symbols |       |              |
 lword | Latin word    | sat   | {english}    | english: {sat}
 blank | Space symbols |       |              |
 lword | Latin word    | on    | {english}    | english: {}
 blank | Space symbols |       |              |
 lword | Latin word    | a     | {english}    | english: {}
 blank | Space symbols |       |              |
 lword | Latin word    | mat   | {english}    | english: {mat}
 blank | Space symbols |       |              |
 blank | Space symbols | -     |              |
 lword | Latin word    | it    | {english}    | english: {}
 blank | Space symbols |       |              |
 lword | Latin word    | ate   | {english}    | english: {ate}
 blank | Space symbols |       |              |
 lword | Latin word    | a     | {english}    | english: {}
 blank | Space symbols |       |              |
 lword | Latin word    | fat   | {english}    | english: {fat}
 blank | Space symbols |       |              |
 lword | Latin word    | rats  | {english}    | english: {rat}
   (24 rows)
</programlisting>
   </para>

   <para>
    Function <function>setweight()</function> is used to label
    <type>tsvector</type>. The typical usage of this is to mark out the
    different parts of a document, perhaps by importance.  Later, this can be
    used for ranking of search results in addition to positional information
    (distance between query terms).  If no ranking is required, positional
    information can be removed from <type>tsvector</type> using the
    <function>strip()</function> function to save space.
   </para>

   <para>
    Because <function>to_tsvector</function>(<LITERAL>NULL</LITERAL>) can
    return <LITERAL>NULL</LITERAL>, it is recommended to use
    <function>coalesce</function>. Here is the safe method for creating a
    <type>tsvector</type> from a structured document:

<programlisting>
UPDATE tt SET ti=
    setweight(to_tsvector(coalesce(title,'')), 'A')    || ' ' ||
    setweight(to_tsvector(coalesce(keyword,'')), 'B')  || ' ' ||
    setweight(to_tsvector(coalesce(abstract,'')), 'C') || ' ' ||
    setweight(to_tsvector(coalesce(body,'')), 'D');
</programlisting>
   </para>

   <para>
    The following functions allow manual parsing control:

    <variablelist>

     <varlistentry>

      <indexterm>
       <primary>ts_parse</primary>
      </indexterm>

      <term>
       <synopsis>
        ts_parse(<replaceable class="PARAMETER">parser</replaceable>, <replaceable class="PARAMETER">document</replaceable> text, OUT <replaceable class="PARAMETER">tokid</> integer, OUT <replaceable class="PARAMETER">token</> text) returns SETOF RECORD
       </synopsis>
      </term>

      <listitem>
       <para>
        Parses the given <replaceable>document</replaceable> and returns a series
        of records, one for each token produced by parsing. Each record includes
        a <varname>tokid</varname> giving its type and a <varname>token</varname>
        which gives its content:

<programlisting>
SELECT * FROM ts_parse('default','123 - a number');
 tokid | token
-------+--------
    22 | 123
    12 |
    12 | -
     1 | a
    12 |
     1 | number
</programlisting>
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <indexterm>
       <primary>ts_token_type</primary>
      </indexterm>

      <term>
       <synopsis>
        ts_token_type(<replaceable class="PARAMETER">parser</>, OUT <replaceable class="PARAMETER">tokid</> integer, OUT <replaceable class="PARAMETER">alias</> text, OUT <replaceable class="PARAMETER">description</> text) returns SETOF RECORD
       </synopsis>
      </term>

      <listitem>
       <para>
        Returns a table which describes each kind of token the
        <replaceable>parser</replaceable> might produce as output.  For each token
        type the table gives the <varname>tokid</varname> which the
        <replaceable>parser</replaceable> uses to label each
        <varname>token</varname> of that type, the <varname>alias</varname> which
        names the token type, and a short <varname>description</varname>:

<programlisting>
SELECT * FROM ts_token_type('default');
 tokid |    alias     |            description
-------+--------------+-----------------------------------
     1 | lword        | Latin word
     2 | nlword       | Non-latin word
     3 | word         | Word
     4 | email        | Email
     5 | url          | URL
     6 | host         | Host
     7 | sfloat       | Scientific notation
     8 | version      | VERSION
     9 | part_hword   | Part of hyphenated word
    10 | nlpart_hword | Non-latin part of hyphenated word
    11 | lpart_hword  | Latin part of hyphenated word
    12 | blank        | Space symbols
    13 | tag          | HTML Tag
    14 | protocol     | Protocol head
    15 | hword        | Hyphenated word
    16 | lhword       | Latin hyphenated word
    17 | nlhword      | Non-latin hyphenated word
    18 | uri          | URI
    19 | file         | File or path name
    20 | float        | Decimal notation
    21 | int          | Signed integer
    22 | uint         | Unsigned integer
    23 | entity       | HTML Entity
</programlisting>

       </para>
      </listitem>
     </varlistentry>

    </variablelist>
   </para>

  </sect2>

  <sect2 id="textsearch-ranking">
   <title>Ranking Search Results</title>

   <para>
    Ranking attempts to measure how relevant documents are to a particular
    query by inspecting the number of times each search word appears in the
    document, and whether different search terms occur near each other.  Full
    text searching provides two predefined ranking functions which attempt to
    produce a measure of how a document is relevant to the query.  In spite
    of that, the concept of relevancy is vague and very application-specific.
    These functions try to take into account lexical, proximity, and structural
    information.  Different applications might require additional information
    for ranking, e.g. document modification time.
   </para>

   <para>
    The lexical part of ranking reflects how often the query terms appear in
    the document, how close the document query terms are, and in what part of
    the document they occur.  Note that ranking functions that use positional
    information will only work on unstripped tsvectors because stripped
    tsvectors lack positional information.
   </para>

   <para>
    The two ranking functions currently available are:

    <variablelist>

     <varlistentry>

      <indexterm>
       <primary>ts_rank</primary>
      </indexterm>

      <term>
       <synopsis>
        ts_rank(<optional> <replaceable class="PARAMETER">weights</replaceable> float4[]</optional>, <replaceable class="PARAMETER">vector</replaceable> TSVECTOR, <replaceable class="PARAMETER">query</replaceable> TSQUERY, <optional> <replaceable class="PARAMETER">normalization</replaceable> int4 </optional>) returns float4
       </synopsis>
      </term>

      <listitem>
       <para>
        This ranking function offers the ability to weigh word instances more
        heavily depending on how you have classified them.  The weights specify
        how heavily to weigh each category of word:

<programlisting>
{D-weight, C-weight, B-weight, A-weight}
</programlisting>

        If no weights are provided,
        then these defaults are used:

<programlisting>
{0.1, 0.2, 0.4, 1.0}
</programlisting>

        Often weights are used to mark words from special areas of the document,
        like the title or an initial abstract, and make them more or less important
        than words in the document body.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>

      <indexterm>
       <primary>ts_rank_cd</primary>
      </indexterm>

      <term>
       <synopsis>
        ts_rank_cd(<optional> <replaceable class="PARAMETER">weights</replaceable> float4[], </optional> <replaceable class="PARAMETER">vector</replaceable> TSVECTOR, <replaceable class="PARAMETER">query</replaceable> TSQUERY, <optional> <replaceable class="PARAMETER">normalization</replaceable> int4 </optional>) returns float4
       </synopsis>
      </term>

      <listitem>
       <para>
        This function computes the <emphasis>cover density</emphasis> ranking for
        the given document vector and query, as described in Clarke, Cormack, and
        Tudhope's "Relevance Ranking for One to Three Term Queries" in the
        "Information Processing and Management", 1999.
       </para>
      </listitem>
     </varlistentry>

    </variablelist>

   </para>

   <para>
    Since a longer document has a greater chance of containing a query term
    it is reasonable to take into account document size, i.e. a hundred-word
    document with five instances of a search word is probably more relevant
    than a thousand-word document with five instances.  Both ranking functions
    take an integer <replaceable>normalization</replaceable> option that
    specifies whether a document's length should impact its rank.  The integer
    option controls several behaviors which is done using bit-wise fields and
    <literal>|</literal> (for example, <literal>2|4</literal>):

    <itemizedlist  spacing="compact" mark="bullet">
     <listitem>
      <para>
       0 (the default) ignores the document length
      </para>
     </listitem>
     <listitem>
      <para>
       1 divides the rank by 1 + the logarithm of the document length
      </para>
     </listitem>
     <listitem>
      <para>
       2 divides the rank by the length itself
      </para>
     </listitem>
     <listitem>
      <para>
       <!-- what is mean harmonic distance -->
       4 divides the rank by the mean harmonic distance between extents
      </para>
     </listitem>
     <listitem>
      <para>
       8 divides the rank by the number of unique words in document
      </para>
     </listitem>
     <listitem>
      <para>
       16 divides the rank by 1 + logarithm of the number of unique words in document
      </para>
     </listitem>
    </itemizedlist>

   </para>

   <para>
    It is important to note that ranking functions do not use any global
    information so it is impossible to produce a fair normalization to 1% or
    100%, as sometimes required. However, a simple technique like
    <literal>rank/(rank+1)</literal> can be applied.  Of course, this is just
    a cosmetic change, i.e., the ordering of the search results will not change.
   </para>

   <para>
    Several examples are shown below; note that the second example uses
    normalized ranking:

<programlisting>
SELECT title, ts_rank_cd('{0.1, 0.2, 0.4, 1.0}',textsearch, query) AS rnk
FROM apod, to_tsquery('neutrino|(dark &amp; matter)') query
WHERE query @@ textsearch
ORDER BY rnk DESC LIMIT 10;
                     title                     |   rnk
-----------------------------------------------+----------
 Neutrinos in the Sun                          |      3.1
 The Sudbury Neutrino Detector                 |      2.4
 A MACHO View of Galactic Dark Matter          |  2.01317
 Hot Gas and Dark Matter                       |  1.91171
 The Virgo Cluster: Hot Plasma and Dark Matter |  1.90953
 Rafting for Solar Neutrinos                   |      1.9
 NGC 4650A: Strange Galaxy and Dark Matter     |  1.85774
 Hot Gas and Dark Matter                       |   1.6123
 Ice Fishing for Cosmic Neutrinos              |      1.6
 Weak Lensing Distorts the Universe            | 0.818218

SELECT title, ts_rank_cd('{0.1, 0.2, 0.4, 1.0}',textsearch, query)/
(ts_rank_cd('{0.1, 0.2, 0.4, 1.0}',textsearch, query) + 1) AS rnk
FROM apod, to_tsquery('neutrino|(dark &amp; matter)') query
WHERE  query @@ textsearch
ORDER BY rnk DESC LIMIT 10;
                     title                     |        rnk
-----------------------------------------------+-------------------
 Neutrinos in the Sun                          | 0.756097569485493
 The Sudbury Neutrino Detector                 | 0.705882361190954
 A MACHO View of Galactic Dark Matter          | 0.668123210574724
 Hot Gas and Dark Matter                       |  0.65655958650282
 The Virgo Cluster: Hot Plasma and Dark Matter | 0.656301290640973
 Rafting for Solar Neutrinos                   | 0.655172410958162
 NGC 4650A: Strange Galaxy and Dark Matter     | 0.650072921219637
 Hot Gas and Dark Matter                       | 0.617195790024749
 Ice Fishing for Cosmic Neutrinos              | 0.615384618911517
 Weak Lensing Distorts the Universe            | 0.450010798361481
</programlisting>
  </para>

   <para>
    The first argument in <function>ts_rank_cd</function> (<literal>'{0.1, 0.2,
    0.4, 1.0}'</literal>) is an optional parameter which specifies the
    weights for labels <literal>D</literal>, <literal>C</literal>,
    <literal>B</literal>, and <literal>A</literal> used in function
    <function>setweight</function>. These default values show that lexemes
    labeled as <literal>A</literal> are ten times more important than ones
    that are labeled with <literal>D</literal>.
   </para>

   <para>
    Ranking can be expensive since it requires consulting the
    <type>tsvector</type> of all documents, which can be I/O bound and
    therefore slow. Unfortunately, it is almost impossible to avoid since full
    text searching in a database should work without indexes <!-- TODO I don't
    get this -->.  Moreover an index can be lossy (a <acronym>GiST</acronym>
    index, for example) so it must check documents to avoid false hits.
   </para>

   <para>
    Note that the ranking functions above are only examples.  You can write
    your own ranking functions and/or combine additional factors to fit your
    specific needs.
   </para>

  </sect2>

  <sect2 id="textsearch-headline">
   <title>Highlighting Results</title>

   <indexterm>
    <primary>headline</primary>
   </indexterm>

   <para>
    To present search results it is ideal to show a part of each document and
    how it is related to the query. Usually, search engines show fragments of
    the document with marked search terms.  <productname>PostgreSQL</> full
    text searching provides the function <function>headline</function> that
    implements such functionality.
   </para>

   <variablelist>

    <varlistentry>

     <term>
      <synopsis>
       ts_headline(<optional> <replaceable class="PARAMETER">config_name</replaceable> text</optional>, <replaceable class="PARAMETER">document</replaceable> text, <replaceable class="PARAMETER">query</replaceable> TSQUERY, <optional> <replaceable class="PARAMETER">options</replaceable> text </optional>) returns text
      </synopsis>
     </term>

     <listitem>
      <para>
       The <function>ts_headline</function> function accepts a document along with
       a query, and returns one or more ellipsis-separated excerpts from the
       document in which terms from the query are highlighted.  The configuration
       used to parse the document can be specified by its
       <replaceable>config_name</replaceable>; if none is specified, the current
       configuration is used.
      </para>


     </listitem>
    </varlistentry>
   </variablelist>

   <para>
    If an <replaceable>options</replaceable> string is specified it should
    consist of a comma-separated list of one or more 'option=value' pairs.
    The available options are:

    <itemizedlist  spacing="compact" mark="bullet">
     <listitem>
      <para>
       <literal>StartSel</>, <literal>StopSel</literal>: the strings with which
       query words appearing in the document should be delimited to distinguish
       them from other excerpted words.
      </para>
     </listitem>
     <listitem >
      <para>
       <literal>MaxWords</>, <literal>MinWords</literal>: limit the shortest and
       longest headlines to output
      </para>
     </listitem>
     <listitem>
      <para>
       <literal>ShortWord</literal>: this prevents your headline from beginning
       or ending with a word which has this many characters or less. The default
       value of three eliminates the English articles.
      </para>
     </listitem>
     <listitem>
      <para>
       <literal>HighlightAll</literal>: boolean flag;  if
       <literal>true</literal> the whole document will be highlighted
      </para>
     </listitem>
    </itemizedlist>

    Any unspecified options receive these defaults:

<programlisting>
StartSel=&lt;b&gt;, StopSel=&lt;/b&gt;, MaxWords=35, MinWords=15, ShortWord=3, HighlightAll=FALSE
</programlisting>
   </para>

   <para>
    For example:

<programlisting>
SELECT ts_headline('a b c', 'c'::tsquery);
   headline
--------------
 a b &lt;b&gt;c&lt;/b&gt;

SELECT ts_headline('a b c', 'c'::tsquery, 'StartSel=&lt;,StopSel=&gt;');
 ts_headline
-------------
 a b  &lt;c&gt;
</programlisting>
   </para>

   <para>
    <function>headline</> uses the original document, not
    <type>tsvector</type>, so it can be slow and should be used with care.
    A typical mistake is to call <function>headline()</function> for
    <emphasis>every</emphasis> matching document when only ten documents are
    shown. <acronym>SQL</acronym> subselects can help here;  below is an
    example:

<programlisting>
SELECT id,ts_headline(body,q), rank
FROM (SELECT id,body,q, ts_rank_cd (ti,q) AS rank FROM apod, to_tsquery('stars') q
WHERE ti @@ q
ORDER BY rank DESC LIMIT 10) AS foo;
</programlisting>
   </para>

   <para>
    Note that the cascade dropping of the <function>parser</function> function
    causes dropping of the <literal>ts_headline</literal> used in the full text search
    configuration <replaceable>config_name</replaceable><!-- TODO I don't get this -->.
   </para>

  </sect2>

 </sect1>

 <sect1 id="textsearch-dictionaries">
  <title>Dictionaries</title>

  <para>
   Dictionaries are used to eliminate words that should not be considered in a
   search (<firstterm>stop words</>), and to <firstterm>normalize</> words so
   that different derived forms of the same word will match.  Aside from
   improving search quality, normalization and removal of stop words reduce the
   size of the <type>tsvector</type> representation of a document, thereby
   improving performance.  Normalization does not always have linguistic meaning
   and usually depends on application semantics.
  </para>

  <para>
   Some examples of normalization:

   <itemizedlist  spacing="compact" mark="bullet">

    <listitem>
     <para>
      Linguistic - ispell dictionaries try to reduce input words to a
      normalized form; stemmer dictionaries remove word endings
     </para>
    </listitem>
    <listitem>
     <para>
      Identical <acronym>URL</acronym> locations are identified and canonicalized:

      <itemizedlist  spacing="compact" mark="bullet">
       <listitem>
        <para>
         http://www.pgsql.ru/db/mw/index.html
        </para>
       </listitem>
       <listitem>
        <para>
         http://www.pgsql.ru/db/mw/
        </para>
       </listitem>
       <listitem>
        <para>
         http://www.pgsql.ru/db/../db/mw/index.html
        </para>
       </listitem>
      </itemizedlist>
     </para>
    </listitem>
    <listitem>
     <para>
      Colour names are substituted by their hexadecimal values, e.g.,
      <literal>red, green, blue, magenta -> FF0000, 00FF00, 0000FF, FF00FF</literal>
     </para>
    </listitem>
    <listitem>
     <para>
      Remove some numeric fractional digits to reduce the range of possible
      numbers, so <emphasis>3.14</emphasis>159265359,
      <emphasis>3.14</emphasis>15926, <emphasis>3.14</emphasis> will be the same
      after normalization if only two digits are kept after the decimal point.
     </para>
    </listitem>
   </itemizedlist>

  </para>

  <para>
   A dictionary is a <emphasis>program</emphasis> which accepts lexemes as
   input and returns:
   <itemizedlist  spacing="compact" mark="bullet">
    <listitem>
     <para>
      an array of lexemes if the input lexeme is known to the dictionary
     </para>
    </listitem>
    <listitem>
     <para>
      a void array if the dictionary knows the lexeme, but it is a stop word
     </para>
    </listitem>
    <listitem>
     <para>
      <literal>NULL</literal> if the dictionary does not recognize the input lexeme
     </para>
    </listitem>
   </itemizedlist>
  </para>

  <para>
   Full text searching provides predefined dictionaries for many languages,
   and <acronym>SQL</acronym> commands to manipulate them.  There are also
   several predefined template dictionaries that can be used to create new
   dictionaries by overriding their default parameters.  Besides this, it is
   possible to develop custom dictionaries using an <acronym>API</acronym>;
   see the dictionary for integers (<xref
   linkend="textsearch-rule-dictionary-example">) as an example.
  </para>

  <para>
   The <literal>ALTER TEXT SEARCH CONFIGURATION ADD
   MAPPING</literal> command binds specific types of lexemes and a set of
   dictionaries to process them. (Mappings can also be specified as part of
   configuration creation.) Lexemes are processed by a stack of dictionaries
   until some dictionary identifies it as a known word or it turns out to be
   a stop word.  If no dictionary recognizes a lexeme, it will be discarded
   and not indexed. A general rule for configuring a stack of dictionaries
   is to place first the most narrow, most specific dictionary, then the more
   general dictionaries and finish it with a very general dictionary, like
   the <application>snowball</> stemmer or <literal>simple</>, which
   recognizes everything.  For example, for an astronomy-specific search
   (<literal>astro_en</literal> configuration) one could bind
   <type>lword</type> (latin word) with a synonym dictionary of astronomical
   terms, a general English dictionary and a <application>snowball</> English
   stemmer:

<programlisting>
ALTER TEXT SEARCH CONFIGURATION astro_en
    ADD MAPPING FOR lword WITH astrosyn, english_ispell, english_stem;
</programlisting>
  </para>

  <para>
   Function <function>ts_lexize</function> can be used to test dictionaries,
   for example:

<programlisting>
SELECT ts_lexize('english_stem', 'stars');
 ts_lexize
-----------
 {star}
(1 row)
</programlisting>

   Also, the <function>ts_debug</function> function (<xref
   linkend="textsearch-debugging">) is helpful for testing.
  </para>

  <sect2 id="textsearch-stopwords">
   <title>Stop Words</title>

   <para>
    Stop words are words which are very common, appear in almost every
    document, and have no discrimination value. Therefore, they can be ignored
    in the context of full text searching. For example, every English text
    contains words like <literal>a</literal> and <literal>the</>, so it is
    useless to store them in an index.  However, stop words do affect the
    positions in <type>tsvector</type>, which in turn affect ranking:

<programlisting>
SELECT to_tsvector('english','in the list of stop words');
        to_tsvector
----------------------------
 'list':3 'stop':5 'word':6
</programlisting>

    The gaps between positions 1-3 and 3-5 are because of stop words, so ranks
    calculated for documents with and without stop words are quite different:

<programlisting>
SELECT ts_rank_cd ('{1,1,1,1}', to_tsvector('english','in the list of stop words'), to_tsquery('list &amp; stop'));
 ts_rank_cd
------------
        0.5

SELECT ts_rank_cd ('{1,1,1,1}', to_tsvector('english','list stop words'), to_tsquery('list &amp; stop'));
 ts_rank_cd
------------
          1
</programlisting>

   </para>

   <para>
    It is up to the specific dictionary how it treats stop words. For example,
    <literal>ispell</literal> dictionaries first normalize words and then
    look at the list of stop words, while <literal>stemmers</literal>
    first check the list of stop words. The reason for the different
    behaviour is an attempt to decrease possible noise.
   </para>

   <para>
    Here is an example of a dictionary that returns the input word as lowercase
    or <literal>NULL</literal> if it is a stop word; it also specifies the name
    of a file of stop words.  It uses the <literal>simple</> dictionary as
    a template:

<programlisting>
CREATE TEXT SEARCH DICTIONARY public.simple_dict (
    TEMPLATE = pg_catalog.simple,
    STOPWORDS = english
);
</programlisting>

    Now we can test our dictionary:

<programlisting>
SELECT ts_lexize('public.simple_dict','YeS');
 ts_lexize
-----------
 {yes}

SELECT ts_lexize('public.simple_dict','The');
 ts_lexize
-----------
 {}
</programlisting>
   </para>

   <caution>
    <para>
     Most types of dictionaries rely on configuration files, such as files of stop
     words.  These files <emphasis>must</> be stored in UTF-8 encoding.  They will
     be translated to the actual database encoding, if that is different, when they
     are read into the server.
    </para>
   </caution>

  </sect2>

  <sect2 id="textsearch-synonym-dictionary">
   <title>Synonym Dictionary</title>

   <para>
    This dictionary template is used to create dictionaries which replace a
    word with a synonym. Phrases are not supported (use the thesaurus
    dictionary (<xref linkend="textsearch-thesaurus">) for that).  A synonym
    dictionary can be used to overcome linguistic problems, for example, to
    prevent an English stemmer dictionary from reducing the word 'Paris' to
    'pari'.  It is enough to have a <literal>Paris paris</literal> line in the
    synonym dictionary and put it before the <literal>english_stem</> dictionary:

<programlisting>
SELECT * FROM ts_debug('english','Paris');
 Alias | Description | Token |  Dictionaries  |    Lexized token
-------+-------------+-------+----------------+----------------------
 lword | Latin word  | Paris | {english_stem} | english_stem: {pari}
(1 row)

CREATE TEXT SEARCH DICTIONARY synonym
    (TEMPLATE = synonym, SYNONYMS = my_synonyms);

ALTER TEXT SEARCH CONFIGURATION english
    ALTER MAPPING FOR lword WITH synonym, english_stem;

SELECT * FROM ts_debug('english','Paris');
 Alias | Description | Token |      Dictionaries      |  Lexized token
-------+-------------+-------+------------------------+------------------
 lword | Latin word  | Paris | {synonym,english_stem} | synonym: {paris}
(1 row)
</programlisting>
   </para>

  </sect2>

  <sect2 id="textsearch-thesaurus">
   <title>Thesaurus Dictionary</title>

   <para>
    A thesaurus dictionary (sometimes abbreviated as <acronym>TZ</acronym>) is
    a collection of words which includes information about the relationships
    of words and phrases, i.e., broader terms (<acronym>BT</acronym>), narrower
    terms (<acronym>NT</acronym>), preferred terms, non-preferred terms, related
    terms, etc.
   </para>

   <para>
    Basically a thesaurus dictionary replaces all non-preferred terms by one
    preferred term and, optionally, preserves them for indexing.  Thesauruses
    are used during indexing so any change in the thesaurus <emphasis>requires</emphasis>
    reindexing.  The current implementation of the thesaurus
    dictionary is an extension of the synonym dictionary with added
    <emphasis>phrase</emphasis> support.  A thesaurus dictionary requires
    a configuration file of the following format:

<programlisting>
# this is a comment
sample word(s) : indexed word(s)
more sample word(s) : more indexed word(s)
...
</programlisting>

    where  the colon (<symbol>:</symbol>) symbol acts as a delimiter between a
    a phrase and its replacement.
   </para>

   <para>
    A thesaurus dictionary uses a <emphasis>subdictionary</emphasis> (which
    is defined in the dictionary's configuration) to normalize the input text
    before checking for phrase matches. It is only possible to select one
    subdictionary.  An error is reported if the subdictionary fails to
    recognize a word. In that case, you should remove the use of the word or teach
    the subdictionary about it.  Use an asterisk (<symbol>*</symbol>) at the
    beginning of an indexed word to skip the subdictionary. It is still required
    that sample words are known.
   </para>

   <para>
    The thesaurus dictionary looks for the longest match.
   </para>

   <para>
    Stop words recognized by the subdictionary are replaced by a 'stop word
    placeholder' to record their position. To break possible ties the thesaurus
    uses the last definition. To illustrate this, consider a thesaurus (with
    a <parameter>simple</parameter> subdictionary) with pattern
    <replaceable>swsw</>, where <replaceable>s</> designates any stop word and
    <replaceable>w</>, any known word:

<programlisting>
a one the two : swsw
the one a two : swsw2
</programlisting>

    Words <literal>a</> and <literal>the</> are stop words defined in the
    configuration of a subdictionary. The thesaurus considers <literal>the
    one the two</literal> and <literal>that one then two</literal> as equal
    and will use definition <replaceable>swsw2</>.
   </para>

   <para>
    As any normal dictionary, it can be assigned to the specific lexeme types.
    Since a thesaurus dictionary has the capability to recognize phrases it
    must remember its state and interact with the parser. A thesaurus dictionary
    uses these assignments to check if it should handle the next word or stop
    accumulation.  The thesaurus dictionary compiler must be configured
    carefully. For example, if the thesaurus dictionary is assigned to handle
    only the <token>lword</token> lexeme, then a thesaurus dictionary
    definition like ' one 7' will not work since lexeme type
    <token>digit</token> is not assigned to the thesaurus dictionary.
   </para>

  </sect2>

  <sect2 id="textsearch-thesaurus-config">
   <title>Thesaurus Configuration</title>

   <para>
    To define a new thesaurus dictionary one can use the thesaurus template.
    For example:

<programlisting>
CREATE TEXT SEARCH DICTIONARY thesaurus_simple (
    TEMPLATE = thesaurus,
    DictFile = mythesaurus,
    Dictionary = pg_catalog.english_stem
);
</programlisting>

    Here:
    <itemizedlist  spacing="compact" mark="bullet">
     <listitem>
      <para>
       <literal>thesaurus_simple</literal> is the thesaurus dictionary name
      </para>
     </listitem>
     <listitem>
      <para>
       <literal>mythesaurus</literal> is the base name of the thesaurus file
       (its full name will be <filename>$SHAREDIR/tsearch_data/mythesaurus.ths</>,
       where <literal>$SHAREDIR</> means the installation shared-data directory,
       often <filename>/usr/local/share</>).
      </para>
     </listitem>
     <listitem>
      <para>
       <literal>pg_catalog.english_stem</literal> is the dictionary (Snowball
       English stemmer) to use for thesaurus normalization.  Notice that the
       <literal>english_stem</> dictionary has its own configuration (for example,
       stop words), which is not shown here.
      </para>
     </listitem>
    </itemizedlist>

    Now it is possible to bind the thesaurus dictionary <literal>thesaurus_simple</literal>
    and selected <literal>tokens</literal>, for example:

<programlisting>
ALTER TEXT SEARCH CONFIGURATION russian
    ADD MAPPING FOR lword, lhword, lpart_hword WITH thesaurus_simple;
</programlisting>
   </para>

  </sect2>

  <sect2 id="textsearch-thesaurus-examples">
   <title>Thesaurus Example</title>

   <para>
    Consider a simple astronomical thesaurus <literal>thesaurus_astro</literal>,
    which contains some astronomical word combinations:

<programlisting>
supernovae stars : sn
crab nebulae : crab
</programlisting>

    Below we create a dictionary and bind some token types with
    an astronomical thesaurus and english stemmer:

<programlisting>
CREATE TEXT SEARCH DICTIONARY thesaurus_astro (
    TEMPLATE = thesaurus,
    DictFile = thesaurus_astro,
    Dictionary = english_stem
);

ALTER TEXT SEARCH CONFIGURATION russian
    ADD MAPPING FOR lword, lhword, lpart_hword WITH thesaurus_astro, english_stem;
</programlisting>

    Now we can see how it works. Note that <function>ts_lexize</function> cannot
    be used for testing the thesaurus (see description of
    <function>ts_lexize</function>), but we can use
    <function>plainto_tsquery</function> and <function>to_tsvector</function>
    which accept <literal>text</literal> arguments, not lexemes:

<programlisting>
SELECT plainto_tsquery('supernova star');
 plainto_tsquery
-----------------
 'sn'

SELECT to_tsvector('supernova star');
 to_tsvector
-------------
 'sn':1
</programlisting>

    In principle, one can use <function>to_tsquery</function> if you quote
    the argument:

<programlisting>
SELECT to_tsquery('''supernova star''');
 to_tsquery
------------
 'sn'
</programlisting>

    Notice that <literal>supernova star</literal> matches <literal>supernovae
    stars</literal> in <literal>thesaurus_astro</literal> because we specified the
    <literal>english_stem</literal> stemmer in the thesaurus definition.
   </para>

   <para>
    To keep an original phrase in full text indexing just add it to the right part
    of the definition:

<programlisting>
supernovae stars : sn supernovae stars

SELECT plainto_tsquery('supernova star');
       plainto_tsquery
-----------------------------
 'sn' &amp; 'supernova' &amp; 'star'
</programlisting>
   </para>

  </sect2>

  <sect2 id="textsearch-ispell-dictionary">
   <title>Ispell Dictionary</title>

   <para>
    The <application>Ispell</> template dictionary for full text allows the
    creation of morphological dictionaries based on <ulink
    url="http://ficus-www.cs.ucla.edu/geoff/ispell.html">Ispell</ulink>, which
    supports a large number of languages. This dictionary tries to change an
    input word to its normalized form. Also, more modern spelling dictionaries
    are supported - <ulink
    url="http://en.wikipedia.org/wiki/MySpell">MySpell</ulink> (OO &lt; 2.0.1)
    and <ulink url="http://sourceforge.net/projects/hunspell">Hunspell</ulink>
    (OO &gt;= 2.0.2).  A large list of dictionaries is available on the <ulink
    url="http://wiki.services.openoffice.org/wiki/Dictionaries">OpenOffice
    Wiki</ulink>.
   </para>

   <para>
    The <application>Ispell</> dictionary allows searches without bothering
    about different linguistic forms of a word. For example, a search on
    <literal>bank</literal> would return hits of all declensions and
    conjugations of the search term <literal>bank</literal>, e.g.
    <literal>banking</>, <literal>banked</>, <literal>banks</>,
    <literal>banks'</>, and <literal>bank's</>.

<programlisting>
SELECT ts_lexize('english_ispell','banking');
 ts_lexize
-----------
 {bank}

SELECT ts_lexize('english_ispell','bank''s');
 ts_lexize
-----------
 {bank}

SELECT ts_lexize('english_ispell','banked');
 ts_lexize
-----------
 {bank}
</programlisting>

   </para>

   <para>
    To create an ispell dictionary one should use the built-in
    <literal>ispell</literal> dictionary and specify several
    parameters.
   </para>

<programlisting>
CREATE TEXT SEARCH DICTIONARY english_ispell (
    TEMPLATE = ispell,
    DictFile = english,
    AffFile = english,
    StopWords = english
);
</programlisting>

   <para>
    Here, <literal>DictFile</>, <literal>AffFile</>, and <literal>StopWords</>
    specify the names of the dictionary, affixes, and stop-words files.
   </para>

   <para>
    Ispell dictionaries usually recognize a restricted set of words so they
    should be used in conjunction with another broader dictionary; for
    example, a stemming dictionary, which recognizes everything.
   </para>

   <para>
    Ispell dictionaries support splitting compound words based on an
    ispell dictionary. This is a nice feature and full text searching
    in <productname>PostgreSQL</productname> supports it.
    Notice that the affix file should specify a special flag using the
    <literal>compoundwords controlled</literal> statement that marks dictionary
    words that can participate in compound formation:

<programlisting>
compoundwords  controlled z
</programlisting>

    Several examples for the Norwegian language:

<programlisting>
SELECT ts_lexize('norwegian_ispell','overbuljongterningpakkmesterassistent');
   {over,buljong,terning,pakk,mester,assistent}
SELECT ts_lexize('norwegian_ispell','sjokoladefabrikk');
   {sjokoladefabrikk,sjokolade,fabrikk}
</programlisting>
   </para>

   <note>
    <para>
     <application>MySpell</> does not support compound words.
     <application>Hunspell</> has sophisticated support for compound words. At
     present,  full text searching implements only the basic compound word
     operations of Hunspell.
    </para>
   </note>

  </sect2>

  <sect2 id="textsearch-stemming-dictionary">
   <title><application>Snowball</> Stemming Dictionary</title>

   <para>
    The <application>Snowball</> dictionary template is based on the project
    of Martin Porter, inventor of the popular Porter's stemming algorithm
    for the English language.  Snowball now provides stemming algorithms for
    many languages (see the <ulink url="http://snowball.tartarus.org">Snowball
    site</ulink> for more information).  Each algorithm understands how to
    reduce common variant forms of words to a base, or stem, spelling within
    its language.  A Snowball dictionary requires a language parameter to
    identify which stemmer to use, and optionally can specify a stopword file
    name that gives a list of words to eliminate.
    (<productname>PostgreSQL</productname>'s standard stopword lists are also
    provided by the Snowball project.)
    For example, there is a built-in definition equivalent to

<programlisting>
CREATE TEXT SEARCH DICTIONARY english_stem (
    TEMPLATE = snowball, Language = english, StopWords = english
);
</programlisting>
   </para>

   <para>
    The <application>Snowball</> dictionary recognizes everything, so it is best
    to place it at the end of the dictionary stack. It it useless to have it
    before any other dictionary because a lexeme will never pass through it to
    the next dictionary.
   </para>

  </sect2>

  <sect2 id="textsearch-dictionary-testing">
   <title>Dictionary Testing</title>

   <para>
    The <function>ts_lexize</> function facilitates dictionary testing:

    <variablelist>

     <varlistentry>

      <indexterm>
       <primary>ts_lexize</primary>
      </indexterm>

      <term>
       <synopsis>
        ts_lexize(<replaceable class="PARAMETER">dict_name</replaceable> text, <replaceable class="PARAMETER">lexeme</replaceable> text) returns text[]
       </synopsis>
      </term>

      <listitem>
       <para>
        Returns an array of lexemes if the input <replaceable>lexeme</replaceable>
        is known to the dictionary <replaceable>dictname</replaceable>, or a void
        array if the lexeme is known to the dictionary but it is a stop word, or
        <literal>NULL</literal> if it is an unknown word.
       </para>

<programlisting>
SELECT ts_lexize('english_stem', 'stars');
 ts_lexize
-----------
 {star}

SELECT ts_lexize('english_stem', 'a');
 ts_lexize
-----------
 {}
</programlisting>
      </listitem>
     </varlistentry>

    </variablelist>
   </para>

   <note>
    <para>
     The <function>ts_lexize</function> function expects a
     <replaceable>lexeme</replaceable>, not text. Below is an example:

<programlisting>
SELECT ts_lexize('thesaurus_astro','supernovae stars') is null;
 ?column?
----------
 t
</programlisting>

     The thesaurus dictionary <literal>thesaurus_astro</literal> does know
     <literal>supernovae stars</literal>, but <function>ts_lexize</> fails since it
     does not parse the input text and considers it as a single lexeme. Use
     <function>plainto_tsquery</> and <function>to_tsvector</> to test thesaurus
     dictionaries:

<programlisting>
SELECT plainto_tsquery('supernovae stars');
 plainto_tsquery
-----------------
 'sn'
</programlisting>
    </para>
   </note>

  </sect2>

  <sect2 id="textsearch-tables-configuration">
   <title>Configuration Example</title>

   <para>
    A full text configuration specifies all options necessary to transform a
    document into a <type>tsvector</type>: the parser breaks text into tokens,
    and the dictionaries transform each token into a lexeme.  Every call to
    <function>to_tsvector()</function> and <function>to_tsquery()</function>
    needs a configuration to perform its processing.  To facilitate management
    of full text searching objects, a set of <acronym>SQL</acronym> commands
    is available, and there are several psql commands which display information
    about full text searching objects (<xref linkend="textsearch-psql">).
   </para>

   <para>
    The configuration parameter
    <xref linkend="guc-default-text-search-config">
    specifies the name of the current default configuration, which is the
    one used by text search functions when an explicit configuration
    parameter is omitted.
    It can be set in <filename>postgresql.conf</filename>, or set for an
    individual session using the <command>SET</> command.
   </para>

   <para>
    Several predefined text searching configurations are available in the
    <literal>pg_catalog</literal> schema. If you need a custom configuration
    you can create a new text searching configuration and modify it using SQL
    commands.
   </para>

   <para>
    New text searching objects are created in the current schema by default
    (usually the <literal>public</literal> schema), but a schema-qualified
    name can be used to create objects in the specified schema.
   </para>

   <para>
    As an example, we will create a configuration
    <literal>pg</literal> which starts as a duplicate of the
    <literal>english</> configuration. To be safe, we do this in a transaction:

<programlisting>
BEGIN;

CREATE TEXT SEARCH CONFIGURATION public.pg ( COPY = english );
</programlisting>
   </para>

   <para>
    We will use a PostgreSQL-specific synonym list
    and store it in <filename>share/tsearch_data/pg_dict.syn</filename>.
    The file contents look like:

<programlisting>
postgres    pg
pgsql       pg
postgresql  pg
</programlisting>

    We define the dictionary like this:

<programlisting>
CREATE TEXT SEARCH DICTIONARY pg_dict (
    TEMPLATE = synonym
    SYNONYMS = pg_dict
);
</programlisting>

   </para>

   <para>
    Then register the <productname>ispell</> dictionary
    <literal>english_ispell</literal> using the <literal>ispell</literal> template:

<programlisting>
CREATE TEXT SEARCH DICTIONARY english_ispell (
    TEMPLATE = ispell,
    DictFile = english,
    AffFile = english,
    StopWords = english
);
</programlisting>
   </para>

   <para>
    Now modify mappings for Latin words for configuration <literal>pg</>:

<programlisting>
ALTER TEXT SEARCH CONFIGURATION pg
    ALTER MAPPING FOR lword, lhword, lpart_hword
    WITH pg_dict, english_ispell, english_stem;
</programlisting>
   </para>

   <para>
    We do not index or search some tokens:

<programlisting>
ALTER TEXT SEARCH CONFIGURATION pg
    DROP MAPPING FOR email, url, sfloat, uri, float;
</programlisting>
   </para>

   <para>
    Now, we can test our configuration:

<programlisting>
SELECT * FROM ts_debug('public.pg', '
PostgreSQL, the highly scalable, SQL compliant, open source object-relational
database management system, is now undergoing beta testing of the next
version of our software: PostgreSQL 8.3.
');

   COMMIT;
</programlisting>
   </para>

   <para>
    With the dictionaries and mappings set up, suppose we have a table
    <literal>pgweb</literal> which contains 11239 documents from the
    <productname>PostgreSQL</productname> web site.  Only relevant columns
    are shown:

<programlisting>
=&gt; \d pgweb
           Table "public.pgweb"
  Column   |       Type        | Modifiers
-----------+-------------------+-----------
 tid       | integer           | not null
 path      | character varying | not null
 body      | character varying |
 title     | character varying |
 dlm       | date              |
</programlisting>
   </para>

   <para>
    The next step is to set the session to use the new configuration, which was
    created in the <literal>public</> schema:

<programlisting>
=&gt; \dF
   List of text search configurations
 Schema  | Name | Description
---------+------+-------------
 public  | pg   |

SET default_text_search_config = 'public.pg';
SET

SHOW default_text_search_config;
 default_text_search_config
----------------------------
 public.pg
</programlisting>
   </para>

  </sect2>

 </sect1>

 <sect1 id="textsearch-indexes">
  <title>GiST and GIN Index Types</title>

  <indexterm zone="textsearch-indexes">
   <primary>text search</primary>
   <secondary>index</secondary>
  </indexterm>


  <para>
   There are two kinds of indexes which can be used to speed up full text
   operators (<xref linkend="textsearch-searches">).
   Note that indexes are not mandatory for full text searching.

   <variablelist>

    <varlistentry>

     <indexterm zone="textsearch-indexes">
      <primary>text search</primary>
      <secondary>GiST</secondary>
     </indexterm>

     <indexterm zone="textsearch-indexes">
      <primary>index</primary>
      <secondary>GiST</secondary>
      <tertiary>text search</tertiary>
     </indexterm>

     <term>
      <synopsis>
       CREATE INDEX <replaceable>name</replaceable> ON <replaceable>table</replaceable> USING gist(<replaceable>column</replaceable>);
      </synopsis>
     </term>

     <listitem>
      <para>
       Creates a GiST (Generalized Search Tree)-based index.
       The <replaceable>column</replaceable> can be of <type>tsvector</> or
       <type>tsquery</> type.
      </para>
     </listitem>
    </varlistentry>

    <varlistentry>

     <indexterm zone="textsearch-indexes">
      <primary>text search</primary>
      <secondary>GIN</secondary>
     </indexterm>

     <indexterm zone="textsearch-indexes">
      <primary>index</primary>
      <secondary>GIN</secondary>
      <tertiary>text search</tertiary>
     </indexterm>

     <term>
      <synopsis>
       CREATE INDEX <replaceable>name</replaceable> ON <replaceable>table</replaceable> USING gin(<replaceable>column</replaceable>);
      </synopsis>
     </term>

     <listitem>
      <para>
       Creates a GIN (Generalized Inverted Index)-based index.
       The <replaceable>column</replaceable> must be of <type>tsvector</> type.
      </para>
     </listitem>
    </varlistentry>

   </variablelist>
  </para>

  <para>
   A GiST index is <firstterm>lossy</firstterm>, meaning it is necessary
   to check the actual table row to eliminate false matches.
   <productname>PostgreSQL</productname> does this automatically; for
   example, in the query plan below, the <literal>Filter:</literal>
   line indicates the index output will be rechecked:

<programlisting>
EXPLAIN SELECT * FROM apod WHERE textsearch @@ to_tsquery('supernovae');
                               QUERY PLAN
-------------------------------------------------------------------------
 Index Scan using textsearch_gidx on apod  (cost=0.00..12.29 rows=2 width=1469)
   Index Cond: (textsearch @@ '''supernova'''::tsquery)
   Filter: (textsearch @@ '''supernova'''::tsquery)
</programlisting>

   GiST index lossiness happens because each document is represented by a
   fixed-length signature. The signature is generated by hashing (crc32) each
   word into a random bit in an n-bit string and all words combine to produce
   an n-bit document signature. Because of hashing there is a chance that
   some words hash to the same position and could result in a false hit.
   Signatures calculated for each document in a collection are stored in an
   <literal>RD-tree</literal> (Russian Doll tree), invented by Hellerstein,
   which is an adaptation of <literal>R-tree</literal> for sets.  In our case
   the transitive containment relation <!-- huh --> is realized by
   superimposed coding (Knuth, 1973) of signatures, i.e., a parent is the
   result of 'OR'-ing the bit-strings of all children.  This is a second
   factor of lossiness.  It is clear that parents tend to be full of
   <literal>1</>s (degenerates) and become quite useless because of the
   limited selectivity.  Searching is performed as a bit comparison of a
   signature representing the query and an <literal>RD-tree</literal> entry.
   If all <literal>1</>s of both signatures are in the same position we
   say that this branch probably matches the query, but if there is even one
   discrepancy we can definitely reject this branch.
  </para>

  <para>
   Lossiness causes serious performance degradation since random access of
   <literal>heap</literal> records is slow and limits the usefulness of GiST
   indexes.  The likelihood of false hits depends on several factors, like
   the number of unique words, so using dictionaries to reduce this number
   is recommended.
  </para>

  <para>
   Actually, this  is not the whole story. GiST indexes have an optimization
   for storing small tsvectors (&lt; <literal>TOAST_INDEX_TARGET</literal>
   bytes, 512 bytes).  On leaf pages small tsvectors are stored unchanged,
   while longer ones are represented by their signatures, which introduces
   some lossiness.  Unfortunately, the existing index API does not allow for
   a return value to say whether it found an exact value (tsvector) or whether
   the result needs to be checked.  This is why the GiST index is
   currently marked as lossy.  We hope to improve this in the future.
  </para>

  <para>
   GIN indexes are not lossy but their performance depends logarithmically on
   the number of unique words.
  </para>

  <para>
   There is one side-effect of the non-lossiness of a GIN index when using
   query labels/weights, like <literal>'supernovae:a'</literal>.  A GIN index
   has all the information necessary to determine a match, so the heap is
   not accessed.  However, label information is not stored in the index,
   so if the query involves label weights it must access
   the heap. Therefore, a special full text search operator <literal>@@@</literal>
   was created which forces the use of the heap to get information about
   labels.  GiST indexes are lossy so it always reads the  heap and there is
   no need for a special operator. In the example below,
   <literal>fulltext_idx</literal> is a GIN index:<!-- why isn't this
   automatic -->

<programlisting>
EXPLAIN SELECT * FROM apod WHERE textsearch @@@ to_tsquery('supernovae:a');
                               QUERY PLAN
------------------------------------------------------------------------
 Index Scan using textsearch_idx on apod  (cost=0.00..12.30 rows=2 width=1469)
   Index Cond: (textsearch @@@ '''supernova'':A'::tsquery)
   Filter: (textsearch @@@ '''supernova'':A'::tsquery)
</programlisting>

  </para>

  <para>
   In choosing which index type to use, GiST or GIN, consider these differences:
   <itemizedlist  spacing="compact" mark="bullet">
    <listitem>
     <para>
      GiN index lookups are three times faster than GiST
     </para>
    </listitem>
    <listitem>
     <para>
      GiN indexes take three times longer to build than GiST
     </para>
    </listitem>
    <listitem>
     <para>
      GiN is about ten times slower to update than GiST
     </para>
    </listitem>
    <listitem>
     <para>
      GiN indexes are two-to-three times larger than GiST
     </para>
    </listitem>
   </itemizedlist>
  </para>

  <para>
   In summary, <acronym>GIN</acronym> indexes are best for static data because
   the indexes are faster for lookups.  For dynamic data, GiST indexes are
   faster to update.  Specifically, <acronym>GiST</acronym> indexes are very
   good for dynamic data and fast if the number of unique words (lexemes) is
   under 100,000, while <acronym>GIN</acronym> handles +100,000 lexemes better
   but is slower to update.
  </para>

  <para>
   Partitioning of big collections and the proper use of GiST and GIN indexes
   allows the implementation of very fast searches with online update.
   Partitioning can be done at the database level using table inheritance
   and <varname>constraint_exclusion</>, or distributing documents over
   servers and collecting search results using the <filename>contrib/dblink</>
   extension module. The latter is possible because ranking functions use
   only local information.
  </para>

 </sect1>

 <sect1 id="textsearch-limitations">
  <title>Limitations</title>

  <para>
   The current limitations of Full Text Searching are:
   <itemizedlist  spacing="compact" mark="bullet">
    <listitem>
     <para>The length of each lexeme must be less than 2K bytes  </para>
    </listitem>
    <listitem>
     <para>The length of a <type>tsvector</type> (lexemes + positions) must be less than 1 megabyte  </para>
    </listitem>
    <listitem>
     <para>The number of lexemes must be less than 2<superscript>64</superscript>  </para>
    </listitem>
    <listitem>
     <para>Positional information must be greater than 0 and less than 16,383  </para>
    </listitem>
    <listitem>
     <para>No more than 256 positions per lexeme  </para>
    </listitem>
    <listitem>
     <para>The number of nodes (lexemes + operations) in tsquery must be less than 32,768  </para>
    </listitem>
   </itemizedlist>
  </para>

  <para>
   For comparison, the <productname>PostgreSQL</productname> 8.1 documentation
   contained 10,441 unique words, a total of 335,420 words, and the most frequent
   word <quote>postgresql</> was mentioned 6,127 times in 655 documents.
  </para>

   <!-- TODO we need to put a date on these numbers? -->
  <para>
   Another example &mdash; the <productname>PostgreSQL</productname> mailing list
   archives contained 910,989 unique words with 57,491,343 lexemes in 461,020
   messages.
  </para>

 </sect1>

 <sect1 id="textsearch-psql">
  <title><application>psql</> Support</title>

  <para>
   Information about full text searching objects can be obtained
   in <application>psql</application> using a set of commands:
   <synopsis>
   \dF{d,p,t}<optional>+</optional> <optional>PATTERN</optional>
   </synopsis>
   An optional <literal>+</literal> produces more details.
  </para>

  <para>
   The optional parameter <literal>PATTERN</literal> should be the name of
   a text searching object, optionally schema-qualified.  If
   <literal>PATTERN</literal> is not specified then information about all
   visible objects will be displayed.  <literal>PATTERN</literal> can be a
   regular expression and can provide <emphasis>separate</emphasis> patterns
   for the schema and object names.  The following examples illustrate this:

<programlisting>
=&gt; \dF *fulltext*
       List of text search configurations
 Schema |  Name        | Description
--------+--------------+-------------
 public | fulltext_cfg |
</programlisting>

<programlisting>
=&gt; \dF *.fulltext*
       List of text search configurations
 Schema   |  Name        | Description
----------+----------------------------
 fulltext | fulltext_cfg |
 public   | fulltext_cfg |
</programlisting>
  </para>

  <variablelist>

   <varlistentry>
    <term>\dF[+] [PATTERN]</term>

    <listitem>
     <para>
      List text searching configurations (add <literal>+</> for more detail).
     </para>

     <para>

<programlisting>
=&gt; \dF russian
            List of text search configurations
   Schema   |  Name   |            Description             
------------+---------+------------------------------------
 pg_catalog | russian | configuration for russian language

=&gt; \dF+ russian
Text search configuration "pg_catalog.russian"
Parser: "pg_catalog.default"
    Token     | Dictionaries 
--------------+--------------
 email        | simple
 file         | simple
 float        | simple
 host         | simple
 hword        | russian_stem
 int          | simple
 lhword       | english_stem
 lpart_hword  | english_stem
 lword        | english_stem
 nlhword      | russian_stem
 nlpart_hword | russian_stem
 nlword       | russian_stem
 part_hword   | russian_stem
 sfloat       | simple
 uint         | simple
 uri          | simple
 url          | simple
 version      | simple
 word         | russian_stem
</programlisting>
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>\dFd[+] [PATTERN]</term>
    <listitem>
     <para>
      List text search dictionaries (add <literal>+</> for more detail).
     </para>

     <para>
<programlisting>
=&gt; \dFd
                            List of text search dictionaries
   Schema   |      Name       |                        Description                        
------------+-----------------+-----------------------------------------------------------
 pg_catalog | danish_stem     | snowball stemmer for danish language
 pg_catalog | dutch_stem      | snowball stemmer for dutch language
 pg_catalog | english_stem    | snowball stemmer for english language
 pg_catalog | finnish_stem    | snowball stemmer for finnish language
 pg_catalog | french_stem     | snowball stemmer for french language
 pg_catalog | german_stem     | snowball stemmer for german language
 pg_catalog | hungarian_stem  | snowball stemmer for hungarian language
 pg_catalog | italian_stem    | snowball stemmer for italian language
 pg_catalog | norwegian_stem  | snowball stemmer for norwegian language
 pg_catalog | portuguese_stem | snowball stemmer for portuguese language
 pg_catalog | romanian_stem   | snowball stemmer for romanian language
 pg_catalog | russian_stem    | snowball stemmer for russian language
 pg_catalog | simple          | simple dictionary: just lower case and check for stopword
 pg_catalog | spanish_stem    | snowball stemmer for spanish language
 pg_catalog | swedish_stem    | snowball stemmer for swedish language
 pg_catalog | turkish_stem    | snowball stemmer for turkish language
</programlisting>
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>

   <term>\dFp[+] [PATTERN]</term>
    <listitem>
     <para>
      List text search parsers (add <literal>+</> for more detail).
     </para>

     <para>
<programlisting>
=&gt; \dFp
        List of text search parsers
   Schema   |  Name   |     Description     
------------+---------+---------------------
 pg_catalog | default | default word parser
=&gt; \dFp+
     Text search parser "pg_catalog.default"
      Method      |    Function    | Description 
------------------+----------------+-------------
 Start parse      | prsd_start     | 
 Get next token   | prsd_nexttoken | 
 End parse        | prsd_end       | 
 Get headline     | prsd_headline  | 
 Get lexeme types | prsd_lextype   | 

   Token types for parser "pg_catalog.default"
  Token name  |            Description            
--------------+-----------------------------------
 blank        | Space symbols
 email        | Email
 entity       | HTML Entity
 file         | File or path name
 float        | Decimal notation
 host         | Host
 hword        | Hyphenated word
 int          | Signed integer
 lhword       | Latin hyphenated word
 lpart_hword  | Latin part of hyphenated word
 lword        | Latin word
 nlhword      | Non-latin hyphenated word
 nlpart_hword | Non-latin part of hyphenated word
 nlword       | Non-latin word
 part_hword   | Part of hyphenated word
 protocol     | Protocol head
 sfloat       | Scientific notation
 tag          | HTML Tag
 uint         | Unsigned integer
 uri          | URI
 url          | URL
 version      | VERSION
 word         | Word
(23 rows)
</programlisting>
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>

   <term>\dFt[+] [PATTERN]</term>
    <listitem>
     <para>
      List text search templates (add <literal>+</> for more detail).
     </para>

     <para>
<programlisting>
=&gt; \dFt
                           List of text search templates
   Schema   |   Name    |                        Description                        
------------+-----------+-----------------------------------------------------------
 pg_catalog | ispell    | ispell dictionary
 pg_catalog | simple    | simple dictionary: just lower case and check for stopword
 pg_catalog | snowball  | snowball stemmer
 pg_catalog | synonym   | synonym dictionary: replace word by its synonym
 pg_catalog | thesaurus | thesaurus dictionary: phrase by phrase substitution
</programlisting>
     </para>
    </listitem>
   </varlistentry>

  </variablelist>

 </sect1>

 <sect1 id="textsearch-debugging">
  <title>Debugging</title>

  <para>
   Function <function>ts_debug</function> allows easy testing of your full text searching
   configuration.
  </para>

  <synopsis>
   ts_debug(<optional><replaceable class="PARAMETER">config_name</replaceable></optional>, <replaceable class="PARAMETER">document</replaceable> TEXT) returns SETOF ts_debug
  </synopsis>

  <para>
   <function>ts_debug</> displays information about every token of
   <replaceable class="PARAMETER">document</replaceable> as produced by the
   parser and processed by the configured dictionaries using the configuration
   specified by <replaceable class="PARAMETER">config_name</replaceable>.
  </para>

  <para>
   <replaceable class="PARAMETER">ts_debug</replaceable>'s result type is defined as:

<programlisting>
CREATE TYPE ts_debug AS (
    "Alias" text,
    "Description" text,
    "Token" text,
    "Dictionaries" regdictionary[],
    "Lexized token" text
);
</programlisting>
  </para>

  <para>
   For a demonstration of how function <function>ts_debug</function> works we
   first create a <literal>public.english</literal> configuration and
   ispell dictionary for the English language. You can skip the test step and
   play with the standard <literal>english</literal> configuration.
  </para>

<programlisting>
CREATE TEXT SEARCH CONFIGURATION public.english ( COPY = pg_catalog.english );

CREATE TEXT SEARCH DICTIONARY english_ispell (
    TEMPLATE = ispell,
    DictFile = english,
    AffFile = english,
    StopWords = english
);

ALTER TEXT SEARCH CONFIGURATION public.english
   ALTER MAPPING FOR lword WITH english_ispell, english_stem;
</programlisting>

<programlisting>
SELECT * FROM ts_debug('public.english','The Brightest supernovaes');
 Alias |  Description  |    Token    |              Dictionaries             |          Lexized token
-------+---------------+-------------+---------------------------------------+---------------------------------
 lword | Latin word    | The         | {public.english_ispell,pg_catalog.english_stem} | public.english_ispell: {}
 blank | Space symbols |             |                                       |
 lword | Latin word    | Brightest   | {public.english_ispell,pg_catalog.english_stem} | public.english_ispell: {bright}
 blank | Space symbols |             |                                       |
 lword | Latin word    | supernovaes | {public.english_ispell,pg_catalog.english_stem} | pg_catalog.english_stem: {supernova}
(5 rows)
</programlisting>

  <para>
   In this example, the word <literal>Brightest</> was recognized by a
   parser as a <literal>Latin word</literal> (alias <literal>lword</literal>)
   and came through the dictionaries <literal>public.english_ispell</> and
   <literal>pg_catalog.english_stem</literal>. It was recognized by
   <literal>public.english_ispell</literal>, which reduced it to the noun
   <literal>bright</literal>. The word <literal>supernovaes</literal> is unknown
   by the <literal>public.english_ispell</literal> dictionary so it was passed to
   the next dictionary, and, fortunately, was recognized (in fact,
   <literal>public.english_stem</literal> is a stemming dictionary and recognizes
   everything; that is why it was placed at the end of the dictionary stack).
  </para>

  <para>
   The word <literal>The</literal> was recognized by <literal>public.english_ispell</literal>
   dictionary as a stop word (<xref linkend="textsearch-stopwords">) and will not be indexed.
  </para>

  <para>
   You can always explicitly specify which columns you want to see:

<programlisting>
SELECT "Alias", "Token", "Lexized token"
FROM ts_debug('public.english','The Brightest supernovaes');
 Alias |    Token    |          Lexized token
-------+-------------+---------------------------------
 lword | The         | public.english_ispell: {}
 blank |             |
 lword | Brightest   | public.english_ispell: {bright}
 blank |             |
 lword | supernovaes | pg_catalog.english_stem: {supernova}
(5 rows)
</programlisting>
  </para>

 </sect1>

 <sect1 id="textsearch-rule-dictionary-example">
  <title>Example of Creating a Rule-Based Dictionary</title>

  <para>
   The motivation for this example dictionary is to control the indexing of
   integers (signed and unsigned), and, consequently, to minimize the number
   of unique words which greatly affects to performance of searching.
  </para>

  <para>
   The dictionary accepts two options:
   <itemizedlist spacing="compact" mark="bullet">

    <listitem>
     <para>
      The <LITERAL>MAXLEN</literal> parameter specifies the maximum length of the
      number considered as a 'good' integer. The default value is 6.
     </para>
    </listitem>

    <listitem>
     <para>
      The <LITERAL>REJECTLONG</LITERAL> parameter specifies if a 'long' integer
      should be indexed or treated as a stop word.  If
      <literal>REJECTLONG</literal>=<LITERAL>FALSE</LITERAL> (default),
      the dictionary returns the prefixed part of the integer with length
      <LITERAL>MAXLEN</literal>.  If
      <LITERAL>REJECTLONG</LITERAL>=<LITERAL>TRUE</LITERAL>, the dictionary
      considers a long integer as a stop word.
     </para>
    </listitem>

   </itemizedlist>

  </para>

  <para>
   A similar idea can be applied to the indexing of decimal numbers, for
   example, in the <literal>DecDict</literal> dictionary. The dictionary
   accepts two options: the <literal>MAXLENFRAC</literal> parameter specifies
   the maximum length of the fractional part considered as a 'good' decimal.
   The default value is 3. The <literal>REJECTLONG</literal> parameter
   controls whether a decimal number with a 'long' fractional part should be indexed
   or treated as a stop word. If
   <literal>REJECTLONG</literal>=<literal>FALSE</literal> (default),
   the dictionary returns the decimal number with the length of its fraction part
   truncated to <literal>MAXLEN</literal>. If
   <literal>REJECTLONG</literal>=<literal>TRUE</literal>, the dictionary
   considers the number as a stop word. Notice that
   <literal>REJECTLONG</literal>=<literal>FALSE</literal> allows the indexing
   of 'shortened' numbers and search results will contain documents with
   shortened numbers.
  </para>

  <para>
   Examples:

<programlisting>
SELECT ts_lexize('intdict', 11234567890);
 ts_lexize
-----------
 {112345}
</programlisting>
  </para>

  <para>
   Now, we want to ignore long integers:

<programlisting>

ALTER TEXT SEARCH DICTIONARY intdict (
    MAXLEN = 6, REJECTLONG = TRUE
);

SELECT ts_lexize('intdict', 11234567890);
 ts_lexize
-----------
 {}
</programlisting>
  </para>

  <para>
   Create <filename>contrib/dict_intdict</> directory with files
   <filename>dict_tmpl.c</>, <filename>Makefile</>, <filename>dict_intdict.sql.in</>:

<programlisting>
$ make &amp;&amp; make install
$ psql DBNAME < dict_intdict.sql
</programlisting>
  </para>

  <para>
   This is a <filename>dict_tmpl.c</> file:
  </para>

<programlisting>
#include "postgres.h"
#include "utils/builtins.h"
#include "fmgr.h"

#ifdef PG_MODULE_MAGIC
PG_MODULE_MAGIC;
#endif

#include "tsearch/ts_locale.h"
#include "tsearch/ts_public.h"
#include "tsearch/ts_utils.h"

typedef struct {
  int     maxlen;
  bool    rejectlong;
} DictInt;


PG_FUNCTION_INFO_V1(dinit_intdict);
Datum dinit_intdict(PG_FUNCTION_ARGS);

Datum
dinit_intdict(PG_FUNCTION_ARGS) {
    DictInt *d = (DictInt*)malloc( sizeof(DictInt) );
    Map *cfg, *pcfg;
    text *in;

    if (!d)
        elog(ERROR, "No memory");
    memset(d, 0, sizeof(DictInt));

    /* Your INIT code */
    /* defaults */
    d-&gt;maxlen = 6;
    d-&gt;rejectlong = false;

    if (PG_ARGISNULL(0) || PG_GETARG_POINTER(0) == NULL) /* no options */
        PG_RETURN_POINTER(d);

    in = PG_GETARG_TEXT_P(0);
    parse_keyvalpairs(in, &amp;cfg);
    PG_FREE_IF_COPY(in, 0);
    pcfg=cfg;

    while (pcfg-&gt;key)
    {
        if (strcasecmp("MAXLEN", pcfg-&gt;key) == 0)
                d-&gt;maxlen=atoi(pcfg-&gt;value);
        else if ( strcasecmp("REJECTLONG", pcfg-&gt;key) == 0)
        {
           if ( strcasecmp("true", pcfg-&gt;value) == 0 )
               d-&gt;rejectlong=true;
           else if ( strcasecmp("false", pcfg-&gt;value) == 0)
               d-&gt;rejectlong=false;
           else
               elog(ERROR,"Unknown value: %s =&gt; %s", pcfg-&gt;key, pcfg-&gt;value);
        }
        else
            elog(ERROR,"Unknown option: %s =&gt; %s", pcfg-&gt;key, pcfg-&gt;value);

        pfree(pcfg-&gt;key);
        pfree(pcfg-&gt;value);
        pcfg++;
    }
    pfree(cfg);

    PG_RETURN_POINTER(d);
 }

PG_FUNCTION_INFO_V1(dlexize_intdict);
Datum dlexize_intdict(PG_FUNCTION_ARGS);
Datum
dlexize_intdict(PG_FUNCTION_ARGS)
{
    DictInt *d = (DictInt*)PG_GETARG_POINTER(0);
    char       *in = (char*)PG_GETARG_POINTER(1);
    char *txt = pnstrdup(in, PG_GETARG_INT32(2));
    TSLexeme *res = palloc(sizeof(TSLexeme) * 2);

    /* Your INIT dictionary code */
    res[1].lexeme = NULL;

    if  (PG_GETARG_INT32(2) &gt; d-&gt;maxlen)
    {
       if (d-&gt;rejectlong)
       { /* stop, return void array */
           pfree(txt);
           res[0].lexeme = NULL;
        }
        else
        { /* cut integer */
           txt[d-&gt;maxlen] = '\0';
           res[0].lexeme = txt;
        }
    }
    else
        res[0].lexeme = txt;

    PG_RETURN_POINTER(res);
}
</programlisting>

  <para>
   This is the <literal>Makefile</literal>:

<programlisting>
subdir = contrib/dict_intdict
top_builddir = ../..
include $(top_builddir)/src/Makefile.global

MODULE_big = dict_intdict
OBJS =  dict_tmpl.o
DATA_built = dict_intdict.sql
DOCS =

include $(top_srcdir)/contrib/contrib-global.mk
</programlisting>
  </para>

  <para>
   This is a <literal>dict_intdict.sql.in</literal>:

<programlisting>
SET default_text_search_config = 'english';

BEGIN;

CREATE OR REPLACE FUNCTION dinit_intdict(internal)
    RETURNS internal
    AS 'MODULE_PATHNAME'
    LANGUAGE 'C';

CREATE OR REPLACE FUNCTION dlexize_intdict(internal,internal,internal,internal)
    RETURNS internal
    AS 'MODULE_PATHNAME'
    LANGUAGE 'C'
    WITH (isstrict);

CREATE TEXT SEARCH TEMPLATE intdict_template (
    LEXIZE = dlexize_intdict, INIT = dinit_intdict
);

CREATE TEXT SEARCH DICTIONARY intdict (
  TEMPLATE = intdict_template,
  MAXLEN = 6, REJECTLONG = false
);

COMMENT ON TEXT SEARCH DICTIONARY intdict IS 'Dictionary for Integers';

END;
</programlisting>
  </para>

 </sect1>

 <sect1 id="textsearch-parser-example">
  <title>Example of Creating a Parser</title>

  <para>
   <acronym>SQL</acronym> command <literal>CREATE TEXT SEARCH PARSER</literal> creates
   a parser for full text searching. In our example we will implement
   a simple parser which recognizes space-delimited words and
   has only two types (3, word, Word; 12, blank, Space symbols). Identifiers
   were chosen to keep compatibility with the default <function>headline()</function> function
   since we do not implement our own version.
  </para>

  <para>
   To implement a parser one needs to create a minimum of four functions.
  </para>

  <variablelist>

   <varlistentry>
    <term>
     <synopsis>
      START = <replaceable class="PARAMETER">start_function</replaceable>
     </synopsis>
    </term>
    <listitem>
     <para>
      Initialize the parser. Arguments are a pointer to the parsed text and its
      length.
     </para>
     <para>
      Returns a pointer to the internal structure of a parser. Note that it should
      be <function>malloc</>ed or <function>palloc</>ed in the
      <literal>TopMemoryContext</>.  We name it <literal>ParserState</>.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <synopsis>
      GETTOKEN = <replaceable class="PARAMETER">gettoken_function</replaceable>
     </synopsis>
    </term>
    <listitem>
     <para>
      Returns the next token.
      Arguments are <literal>ParserState *, char **, int *</literal>.
     </para>
     <para>
      This procedure will be called as long as the procedure returns token type zero.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <synopsis>
      END = <replaceable class="PARAMETER">end_function</replaceable>,
     </synopsis>
    </term>
    <listitem>
     <para>
      This void function will be called after parsing is finished to free
      allocated resources in this procedure (<literal>ParserState</>).  The argument
      is <literal>ParserState *</literal>.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <synopsis>
      LEXTYPES = <replaceable class="PARAMETER">lextypes_function</replaceable>
     </synopsis>
    </term>
    <listitem>
     <para>
      Returns an array containing the id, alias, and the description of the tokens
      in the parser. See <structname>LexDescr</structname> in <filename>src/include/utils/ts_public.h</>.
     </para>
    </listitem>
   </varlistentry>

  </variablelist>

  <para>
   Below is the source code of our test parser, organized as a <filename>contrib</> module.
  </para>

  <para>
   Testing:

<programlisting>
SELECT * FROM ts_parse('testparser','That''s my first own parser');
 tokid | token
-------+--------
     3 | That's
    12 |
     3 | my
    12 |
     3 | first
    12 |
     3 | own
    12 |
     3 | parser

SELECT to_tsvector('testcfg','That''s my first own parser');
                   to_tsvector
-------------------------------------------------
 'my':2 'own':4 'first':3 'parser':5 'that''s':1

SELECT ts_headline('testcfg','Supernovae stars are the brightest phenomena in galaxies', to_tsquery('testcfg', 'star'));
                            headline
-----------------------------------------------------------------
 Supernovae &lt;b&gt;stars&lt;/b&gt; are the brightest phenomena in galaxies
</programlisting>

  </para>

  <para>
   This test parser is an example adopted from a tutorial by Valli, <ulink
   url="http://www.sai.msu.su/~megera/postgres/gist/tsearch/V2/docs/HOWTO-parser-tsearch2.html">parser
   HOWTO</ulink>.
  </para>

  <para>
   To compile the example just do:

<programlisting>
$ make
$ make install
$ psql regression < test_parser.sql
</programlisting>
  </para>

  <para>
   This is a <filename>test_parser.c</>:

<programlisting>

#ifdef PG_MODULE_MAGIC
PG_MODULE_MAGIC;
#endif

/*
 * types
 */

/* self-defined type */
typedef struct {
    char *  buffer; /* text to parse */
    int     len;    /* length of the text in buffer */
    int     pos;    /* position of the parser */
} ParserState;

/* copy-paste from wparser.h of tsearch2 */
typedef struct {
    int     lexid;
    char    *alias;
    char    *descr;
} LexDescr;

/*
 * prototypes
 */
PG_FUNCTION_INFO_V1(testprs_start);
Datum testprs_start(PG_FUNCTION_ARGS);

PG_FUNCTION_INFO_V1(testprs_getlexeme);
Datum testprs_getlexeme(PG_FUNCTION_ARGS);

PG_FUNCTION_INFO_V1(testprs_end);
Datum testprs_end(PG_FUNCTION_ARGS);

PG_FUNCTION_INFO_V1(testprs_lextype);
Datum testprs_lextype(PG_FUNCTION_ARGS);

/*
 * functions
 */
Datum testprs_start(PG_FUNCTION_ARGS)
{
    ParserState *pst = (ParserState *) palloc(sizeof(ParserState));
    pst-&gt;buffer = (char *) PG_GETARG_POINTER(0);
    pst-&gt;len = PG_GETARG_INT32(1);
    pst-&gt;pos = 0;

    PG_RETURN_POINTER(pst);
}

Datum testprs_getlexeme(PG_FUNCTION_ARGS)
{
    ParserState *pst   = (ParserState *) PG_GETARG_POINTER(0);
    char        **t    = (char **) PG_GETARG_POINTER(1);
    int         *tlen  = (int *) PG_GETARG_POINTER(2);
    int         type;

    *tlen = pst-&gt;pos;
    *t = pst-&gt;buffer +  pst-&gt;pos;

    if ((pst-&gt;buffer)[pst-&gt;pos] == ' ')
    {
        /* blank type */
        type = 12;
        /* go to the next non-white-space character */
        while ((pst-&gt;buffer)[pst-&gt;pos] == ' ' &amp;&amp;
               pst-&gt;pos &lt; pst-&gt;len)
          (pst-&gt;pos)++;
    } else {
        /* word type */
        type = 3;
        /* go to the next white-space character */
        while ((pst-&gt;buffer)[pst-&gt;pos] != ' ' &amp;&amp;
               pst-&gt;pos &lt; pst-&gt;len)
            (pst-&gt;pos)++;
    }

    *tlen = pst-&gt;pos - *tlen;

    /* we are finished if (*tlen == 0) */
    if (*tlen == 0)
        type=0;

    PG_RETURN_INT32(type);
}

Datum testprs_end(PG_FUNCTION_ARGS)
{
    ParserState *pst = (ParserState *) PG_GETARG_POINTER(0);
    pfree(pst);
    PG_RETURN_VOID();
}

Datum testprs_lextype(PG_FUNCTION_ARGS)
{
    /*
      Remarks:
      - we have to return the blanks for headline reason
      - we use the same lexids like Teodor in the default
        word parser; in this way we can reuse the headline
        function of the default word parser.
    */
    LexDescr *descr = (LexDescr *) palloc(sizeof(LexDescr) * (2+1));

    /* there are only two types in this parser */
    descr[0].lexid = 3;
    descr[0].alias = pstrdup("word");
    descr[0].descr = pstrdup("Word");
    descr[1].lexid = 12;
    descr[1].alias = pstrdup("blank");
    descr[1].descr = pstrdup("Space symbols");
    descr[2].lexid = 0;

    PG_RETURN_POINTER(descr);
}

</programlisting>

    This is a <literal>Makefile</literal>

<programlisting>
override CPPFLAGS := -I. $(CPPFLAGS)

MODULE_big = test_parser
OBJS = test_parser.o

DATA_built = test_parser.sql
DATA =
DOCS = README.test_parser
REGRESS = test_parser


ifdef USE_PGXS
PGXS := $(shell pg_config --pgxs)
include $(PGXS)
else
subdir = contrib/test_parser
top_builddir = ../..
include $(top_builddir)/src/Makefile.global
include $(top_srcdir)/contrib/contrib-global.mk
endif
</programlisting>

   This is a <literal>test_parser.sql.in</literal>:

<programlisting>
SET default_text_search_config = 'english';

BEGIN;

CREATE FUNCTION testprs_start(internal,int4)
    RETURNS internal
    AS 'MODULE_PATHNAME'
    LANGUAGE 'C' with (isstrict);

CREATE FUNCTION testprs_getlexeme(internal,internal,internal)
    RETURNS internal
    AS 'MODULE_PATHNAME'
    LANGUAGE 'C' with (isstrict);

CREATE FUNCTION testprs_end(internal)
    RETURNS void
    AS 'MODULE_PATHNAME'
    LANGUAGE 'C' with (isstrict);

CREATE FUNCTION testprs_lextype(internal)
    RETURNS internal
    AS 'MODULE_PATHNAME'
    LANGUAGE 'C' with (isstrict);


CREATE TEXT SEARCH PARSER testparser (
    START =    testprs_start,
    GETTOKEN = testprs_getlexeme,
    END =      testprs_end,
    LEXTYPES = testprs_lextype
);

CREATE TEXT SEARCH CONFIGURATION testcfg (PARSER = testparser);
ALTER TEXT SEARCH CONFIGURATION testcfg ADD MAPPING FOR word WITH simple;

END;
</programlisting>

  </para>

 </sect1>

</chapter>
