/*-------------------------------------------------------------------------
 *
 * hash.h--
 *    header file for postgres hash access method implementation 
 *
 *
 * Copyright (c) 1994, Regents of the University of California
 *
 * $Id: hash.h,v 1.1 1996/08/27 21:50:12 scrappy Exp $
 *
 * NOTES
 *	modeled after Margo Seltzer's hash implementation for unix. 
 *
 *-------------------------------------------------------------------------
 */
#ifndef HASH_H
#define HASH_H

#include "access/itup.h"

/* 
 * An overflow page is a spare page allocated for storing data whose 
 * bucket doesn't have room to store it. We use overflow pages rather
 * than just splitting the bucket because there is a linear order in
 * the way we split buckets. In other words, if there isn't enough space
 * in the bucket itself, put it in an overflow page. 
 *
 * Overflow page addresses are stored in form: (Splitnumber, Page offset).
 *
 * A splitnumber is the number of the generation where the table doubles
 * in size. The ovflpage's offset within the splitnumber; offsets start
 * at 1. 
 * 
 * We convert the stored bitmap address into a page address with the
 * macro OADDR_OF(S, O) where S is the splitnumber and O is the page 
 * offset. 
 */
typedef uint32 	Bucket;
typedef bits16	OverflowPageAddress;
typedef uint32	SplitNumber;
typedef uint32  PageOffset;

/* A valid overflow address will always have a page offset >= 1 */
#define InvalidOvflAddress	0	
					   
#define SPLITSHIFT	11
#define SPLITMASK	0x7FF
#define SPLITNUM(N)	((SplitNumber)(((uint32)(N)) >> SPLITSHIFT))
#define OPAGENUM(N)	((PageOffset)((N) & SPLITMASK))
#define	OADDR_OF(S,O)	((OverflowPageAddress)((uint32)((uint32)(S) << SPLITSHIFT) + (O)))

#define BUCKET_TO_BLKNO(B) \
	((Bucket) ((B) + ((B) ? metap->SPARES[_hash_log2((B)+1)-1] : 0)) + 1)
#define OADDR_TO_BLKNO(B) 	 \
	((BlockNumber) \
	 (BUCKET_TO_BLKNO ( (1 << SPLITNUM((B))) -1 ) + OPAGENUM((B))));

/* 
 * hasho_flag tells us which type of page we're looking at.  For
 * example, knowing overflow pages from bucket pages is necessary
 * information when you're deleting tuples from a page. If all the
 * tuples are deleted from an overflow page, the overflow is made
 * available to other buckets by calling _hash_freeovflpage(). If all
 * the tuples are deleted from a bucket page, no additional action is
 * necessary.
 */

#define	LH_UNUSED_PAGE		(0)
#define LH_OVERFLOW_PAGE	(1 << 0)
#define LH_BUCKET_PAGE		(1 << 1)
#define	LH_BITMAP_PAGE		(1 << 2)
#define	LH_META_PAGE		(1 << 3)

typedef struct HashPageOpaqueData {
    bits16 hasho_flag;			/* is this page a bucket or ovfl */
    Bucket hasho_bucket;		/* bucket number this pg belongs to */
    OverflowPageAddress hasho_oaddr;	/* ovfl address of this ovfl pg */
    BlockNumber hasho_nextblkno;	/* next ovfl blkno */
    BlockNumber	hasho_prevblkno;	/* previous ovfl (or bucket) blkno */
} HashPageOpaqueData;

typedef HashPageOpaqueData        *HashPageOpaque;

/*
 *  ScanOpaqueData is used to remember which buffers we're currently
 *  examining in the scan.  We keep these buffers locked and pinned and
 *  recorded in the opaque entry of the scan in order to avoid doing a
 *  ReadBuffer() for every tuple in the index.  This avoids semop() calls,
 *  which are expensive.
 */

typedef struct HashScanOpaqueData {
    Buffer      hashso_curbuf;
    Buffer      hashso_mrkbuf;
} HashScanOpaqueData;

typedef HashScanOpaqueData        *HashScanOpaque;

/* 
 * Definitions for metapage.
 */

#define HASH_METAPAGE	0		/* metapage is always block 0 */

#define HASH_MAGIC	0x6440640
#define HASH_VERSION	0

/*
 * NCACHED is used to set the array sizeof spares[] & bitmaps[].
 *
 * Spares[] is used to hold the number overflow pages currently
 * allocated at a certain splitpoint. For example, if spares[3] = 7
 * then there are a maximum of 7 ovflpages available at splitpoint 3.
 * The value in spares[] will change as ovflpages are added within
 * a splitpoint. 
 * 
 * Within a splitpoint, one can find which ovflpages are available and
 * which are used by looking at a bitmaps that are stored on the ovfl
 * pages themselves. There is at least one bitmap for every splitpoint's
 * ovflpages. Bitmaps[] contains the ovflpage addresses of the ovflpages 
 * that hold the ovflpage bitmaps. 
 *
 * The reason that the size is restricted to NCACHED (32) is because
 * the bitmaps are 16 bits: upper 5 represent the splitpoint, lower 11
 * indicate the page number within the splitpoint. Since there are 
 * only 5 bits to store the splitpoint, there can only be 32 splitpoints. 
 * Both spares[] and bitmaps[] use splitpoints as there indices, so there
 * can only be 32 of them. 
 */

#define	NCACHED		32	


typedef struct HashMetaPageData {
    PageHeaderData	hashm_phdr;		/* pad for page header
						   (do not use) */
    uint32		hashm_magic;		/* magic no. for hash tables */
    uint32		hashm_version;		/* version ID */
    uint32		hashm_nkeys;		/* number of keys stored in
						   the table */
    uint16		hashm_ffactor;		/* fill factor */
    uint16		hashm_bsize;		/* bucket size (bytes) -
						   must be a power of 2 */
    uint16		hashm_bshift;		/* bucket shift */
    uint16		hashm_bmsize;		/* bitmap array size (bytes) -
						   must be a power of 2 */
    uint32 		hashm_maxbucket;	/* ID of maximum bucket
						   in use */
    uint32		hashm_highmask;		/* mask to modulo into
						   entire table */
    uint32		hashm_lowmask;		/* mask to modulo into lower
						   half of table */
    uint32		hashm_ovflpoint;	/* pageno. from which ovflpgs
						   being allocated */
    uint32		hashm_lastfreed;	/* last ovflpage freed */
    uint32		hashm_nmaps;		/* Initial number of bitmaps */
    uint32		hashm_spares[NCACHED];	/* spare pages available at
						   splitpoints */
    BlockNumber		hashm_mapp[NCACHED];	/* blknumbers of ovfl page
						   maps */
    RegProcedure	hashm_procid;		/* hash procedure id from
						   pg_proc */
} HashMetaPageData;

typedef HashMetaPageData *HashMetaPage;

/* Short hands for accessing structure */
#define BSHIFT		hashm_bshift
#define OVFL_POINT	hashm_ovflpoint
#define	LAST_FREED	hashm_lastfreed
#define MAX_BUCKET	hashm_maxbucket
#define FFACTOR		hashm_ffactor
#define HIGH_MASK	hashm_highmask
#define LOW_MASK	hashm_lowmask
#define NKEYS		hashm_nkeys
#define SPARES		hashm_spares

extern bool	BuildingHash;

typedef struct HashItemData {
    IndexTupleData          hash_itup;
} HashItemData;

typedef HashItemData      *HashItem;

/*
 * Constants
 */
#define DEFAULT_FFACTOR		300
#define SPLITMAX		8
#define BYTE_TO_BIT		3	/* 2^3 bits/byte */
#define INT_TO_BYTE		2	/* 2^2 bytes/int */
#define INT_TO_BIT		5	/* 2^5 bits/int */
#define ALL_SET			((uint32) ~0)

/*
 * bitmap pages do not contain tuples.  they do contain the standard
 * page headers and trailers; however, everything in between is a
 * giant bit array.  the number of bits that fit on a page obviously
 * depends on the page size and the header/trailer overhead.
 */
#define	BMPGSZ_BYTE(metap)	((metap)->hashm_bmsize)
#define	BMPGSZ_BIT(metap)	((metap)->hashm_bmsize << BYTE_TO_BIT)
#define	HashPageGetBitmap(pg) \
    ((uint32 *) (((char *) (pg)) + DOUBLEALIGN(sizeof(PageHeaderData))))

/*
 * The number of bits in an ovflpage bitmap which
 * tells which ovflpages are empty versus in use (NOT the number of
 * bits in an overflow page *address* bitmap). 
 */
#define BITS_PER_MAP	32	/* Number of bits in ovflpage bitmap */

/* Given the address of the beginning of a big map, clear/set the nth bit */
#define CLRBIT(A, N)	((A)[(N)/BITS_PER_MAP] &= ~(1<<((N)%BITS_PER_MAP)))
#define SETBIT(A, N)	((A)[(N)/BITS_PER_MAP] |= (1<<((N)%BITS_PER_MAP)))
#define ISSET(A, N)	((A)[(N)/BITS_PER_MAP] & (1<<((N)%BITS_PER_MAP)))

/*
 * page locking modes
 */
#define	HASH_READ	0
#define	HASH_WRITE	1

/*  
 *  In general, the hash code tries to localize its knowledge about page
 *  layout to a couple of routines.  However, we need a special value to
 *  indicate "no page number" in those places where we expect page numbers.
 */

#define P_NONE		0

/*
 *  Strategy number. There's only one valid strategy for hashing: equality.
 */

#define HTEqualStrategyNumber		1
#define HTMaxStrategyNumber		1

/*
 *  When a new operator class is declared, we require that the user supply
 *  us with an amproc procudure for hashing a key of the new type.
 *  Since we only have one such proc in amproc, it's number 1.
 */

#define HASHPROC	1

/* public routines */

extern void hashbuild(Relation heap, Relation index, int natts,
	AttrNumber *attnum, IndexStrategy istrat, uint16 pcount,
	Datum *params, FuncIndexInfo *finfo, PredInfo *predInfo);
extern InsertIndexResult hashinsert(Relation rel, Datum *datum, char *nulls,
				    ItemPointer ht_ctid);
extern char *hashgettuple(IndexScanDesc scan, ScanDirection dir);
extern char *hashbeginscan(Relation rel, bool fromEnd, uint16 keysz,
			   ScanKey scankey);
extern void hashrescan(IndexScanDesc scan, bool fromEnd, ScanKey scankey);
extern void hashendscan(IndexScanDesc scan);
extern void hashmarkpos(IndexScanDesc scan);
extern void hashrestrpos(IndexScanDesc scan);
extern void hashdelete(Relation rel, ItemPointer tid);

/* hashfunc.c */
extern uint32 hashint2(int16 key);
extern uint32 hashint4(uint32 key);
extern uint32 hashfloat4(float32 keyp);
extern uint32 hashfloat8(float64 keyp);
extern uint32 hashoid(Oid key);
extern uint32 hashchar(char key);
extern uint32 hashchar2(uint16 intkey);
extern uint32 hashchar4(uint32 intkey);
extern uint32 hashchar8(char *key);
extern uint32 hashchar16(char *key);
extern uint32 hashtext(struct varlena *key);

/* private routines */

/* hashinsert.c */
extern InsertIndexResult _hash_doinsert(Relation rel, HashItem hitem);


/* hashovfl.c */
extern Buffer _hash_addovflpage(Relation rel, Buffer *metabufp, Buffer buf);
extern Buffer _hash_freeovflpage(Relation rel, Buffer ovflbuf);
extern int32 _hash_initbitmap(Relation rel, HashMetaPage metap, int32 pnum,
			      int32 nbits, int32 ndx);
extern void _hash_squeezebucket(Relation rel, HashMetaPage metap,
				Bucket bucket);


/* hashpage.c */
extern void _hash_metapinit(Relation rel);
extern Buffer _hash_getbuf(Relation rel, BlockNumber blkno, int access);
extern void _hash_relbuf(Relation rel, Buffer buf, int access);
extern void _hash_wrtbuf(Relation rel, Buffer buf);
extern void _hash_wrtnorelbuf(Relation rel, Buffer buf);
extern Page _hash_chgbufaccess(Relation rel, Buffer *bufp, int from_access,
			       int to_access);
extern void _hash_pageinit(Page page, Size size);
extern void _hash_pagedel(Relation rel, ItemPointer tid);
extern void _hash_expandtable(Relation rel, Buffer metabuf);


/* hashscan.c */
extern void _hash_regscan(IndexScanDesc scan);
extern void _hash_dropscan(IndexScanDesc scan);
extern void _hash_adjscans(Relation rel, ItemPointer tid);


/* hashsearch.c */
extern void _hash_search(Relation rel, int keysz, ScanKey scankey,
			 Buffer *bufP, HashMetaPage metap);
extern RetrieveIndexResult _hash_next(IndexScanDesc scan, ScanDirection dir);
extern RetrieveIndexResult _hash_first(IndexScanDesc scan, ScanDirection dir);
extern bool _hash_step(IndexScanDesc scan, Buffer *bufP, ScanDirection dir,
		       Buffer metabuf);


/* hashstrat.c */
extern StrategyNumber _hash_getstrat(Relation rel, AttrNumber attno,
				     RegProcedure proc);
extern bool _hash_invokestrat(Relation rel, AttrNumber attno,
			      StrategyNumber strat, Datum left, Datum right);


/* hashutil.c */
extern ScanKey _hash_mkscankey(Relation rel, IndexTuple itup,
			       HashMetaPage metap);
extern void _hash_freeskey(ScanKey skey);
extern bool _hash_checkqual(IndexScanDesc scan, IndexTuple itup);
extern HashItem _hash_formitem(IndexTuple itup);
extern Bucket _hash_call(Relation rel, HashMetaPage metap, Datum key);
extern uint32 _hash_log2(uint32 num);
extern void _hash_checkpage(Page page, int flags);

#endif	/* HASH_H */
