/*-------------------------------------------------------------------------
 *
 * main.c
 *	  Stub main() routine for the postgres executable.
 *
 * This does some essential startup tasks for any incarnation of postgres
 * (postmaster, standalone backend, or standalone bootstrap mode) and then
 * dispatches to the proper FooMain() routine for the incarnation.
 *
 *
 * Portions Copyright (c) 1996-2002, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  $Header: /cvsroot/pgsql/src/backend/main/main.c,v 1.56 2002/11/08 20:23:56 momjian Exp $
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <errno.h>
#include <pwd.h>
#include <unistd.h>

#if defined(__alpha) && defined(__osf__)
#include <sys/sysinfo.h>
#include "machine/hal_sysinfo.h"
#define ASSEMBLER
#include <sys/proc.h>
#undef ASSEMBLER
#endif
#if defined(__NetBSD__)
#include <sys/param.h>
#endif

#include "miscadmin.h"
#include "bootstrap/bootstrap.h"
#include "tcop/tcopprot.h"
#include "utils/ps_status.h"



int
main(int argc, char *argv[])
{
	char	  **new_argv;
	int			i;
	int			len;
	struct passwd *pw;
	char	   *pw_name_persist;

	/*
	 * Place platform-specific startup hacks here.	This is the right
	 * place to put code that must be executed early in launch of either a
	 * postmaster, a standalone backend, or a standalone bootstrap run.
	 * Note that this code will NOT be executed when a backend or
	 * sub-bootstrap run is forked by the postmaster.
	 *
	 * XXX The need for code here is proof that the platform in question is
	 * too brain-dead to provide a standard C execution environment
	 * without help.  Avoid adding more here, if you can.
	 */

#if defined(__alpha)
#ifdef NOFIXADE
	int			buffer[] = {SSIN_UACPROC, UAC_SIGBUS};
#endif   /* NOFIXADE */
#ifdef NOPRINTADE
	int			buffer[] = {SSIN_UACPROC, UAC_NOPRINT};
#endif   /* NOPRINTADE */
#endif   /* __alpha */

#if defined(NOFIXADE) || defined(NOPRINTADE)

#if defined(ultrix4)
	syscall(SYS_sysmips, MIPS_FIXADE, 0, NULL, NULL, NULL);
#endif

#if defined(__alpha)
	if (setsysinfo(SSI_NVPAIRS, buffer, 1, (caddr_t) NULL,
				   (unsigned long) NULL) < 0)
		fprintf(stderr, gettext("%s: setsysinfo failed: %s\n"), argv[0], strerror(errno));
#endif
#endif   /* NOFIXADE || NOPRINTADE */

#ifdef __BEOS__
	/* BeOS-specific actions on startup */
	beos_startup(argc, argv);
#endif

	/*
	 * Not-quite-so-platform-specific startup environment checks. Still
	 * best to minimize these.
	 */

	/*
	 * Remember the physical location of the initially given argv[] array,
	 * since on some platforms that storage must be overwritten in order
	 * to set the process title for ps.  Then make a copy of the argv[]
	 * array for subsequent use, so that argument parsing doesn't get
	 * affected if init_ps_display overwrites the original argv[].
	 *
	 * (NB: do NOT think to remove the copying of argv[], even though
	 * postmaster.c finishes looking at argv[] long before we ever
	 * consider changing the ps display.  On some platforms, getopt()
	 * keeps pointers into the argv array, and will get horribly confused
	 * when it is re-called to analyze a subprocess' argument string if
	 * the argv storage has been clobbered meanwhile.)
	 *
	 * On some platforms, save_ps_display_args moves the environment strings
	 * to make extra room.	Therefore this should be done as early as
	 * possible during startup, to avoid entanglements with code that
	 * might save a getenv() result pointer.
	 */
	save_ps_display_args(argc, argv);

	new_argv = (char **) malloc((argc + 1) * sizeof(char *));
	for (i = 0; i < argc; i++)
		new_argv[i] = strdup(argv[i]);
	new_argv[argc] = NULL;

	/*
	 * Set up locale information from environment.	Note that CTYPE and
	 * COLLATE will be overridden later from pg_control if we are in an
	 * already-initialized database.  We set them here so that they will
	 * be available to fill pg_control during initdb.  The other ones will
	 * get reset later in InitializeGUCOptions, but we set them here to
	 * get already localized behavior during startup (e.g., error
	 * messages).
	 */
	setlocale(LC_COLLATE, "");
	setlocale(LC_CTYPE, "");
#ifdef LC_MESSAGES
	setlocale(LC_MESSAGES, "");
#endif

	/*
	 * We don't use these during startup.  See also pg_locale.c about why
	 * these are set to "C".
	 */
	setlocale(LC_MONETARY, "C");
	setlocale(LC_NUMERIC, "C");
	setlocale(LC_TIME, "C");

#ifdef ENABLE_NLS
	bindtextdomain("postgres", LOCALEDIR);
	textdomain("postgres");
#endif

	/*
	 * Skip permission checks if we're just trying to do --help or
	 * --version; otherwise root will get unhelpful failure messages from
	 * initdb.
	 */
	if (!(argc > 1
		  && (strcmp(argv[1], "--help") == 0 ||
			  strcmp(argv[1], "-?") == 0 ||
			  strcmp(argv[1], "--version") == 0 ||
			  strcmp(argv[1], "-V") == 0)))
	{
		/*
		 * Make sure we are not running as root.
		 *
		 * BeOS currently runs everything as root :-(, so this check must be
		 * temporarily disabled there...
		 */
#ifndef __BEOS__
		if (geteuid() == 0)
		{
			fprintf(stderr, gettext(
									"\"root\" execution of the PostgreSQL server is not permitted.\n\n"
									"The server must be started under an unprivileged user id to prevent\n"
									"a possible system security compromise.  See the documentation for\n"
			  "more information on how to properly start the server.\n\n"
									));
			exit(1);
		}
#endif   /* __BEOS__ */

		/*
		 * Also make sure that real and effective uids are the same.
		 * Executing Postgres as a setuid program from a root shell is a
		 * security hole, since on many platforms a nefarious subroutine
		 * could setuid back to root if real uid is root.  (Since nobody
		 * actually uses Postgres as a setuid program, trying to actively
		 * fix this situation seems more trouble than it's worth; we'll
		 * just expend the effort to check for it.)
		 */
		if (getuid() != geteuid())
		{
			fprintf(stderr, gettext("%s: real and effective user ids must match\n"),
					argv[0]);
			exit(1);
		}
	}

	/*
	 * Now dispatch to one of PostmasterMain, PostgresMain, or
	 * BootstrapMain depending on the program name (and possibly first
	 * argument) we were called with.  The lack of consistency here is
	 * historical.
	 */
	len = strlen(new_argv[0]);

	if (len >= 10 && strcmp(new_argv[0] + len - 10, "postmaster") == 0)
	{
		/* Called as "postmaster" */
		exit(PostmasterMain(argc, new_argv));
	}

	/*
	 * If the first argument is "-boot", then invoke bootstrap mode. Note
	 * we remove "-boot" from the arguments passed on to BootstrapMain.
	 */
	if (argc > 1 && strcmp(new_argv[1], "-boot") == 0)
		exit(BootstrapMain(argc - 1, new_argv + 1));

	/*
	 * Otherwise we're a standalone backend.  Invoke PostgresMain,
	 * specifying current userid as the "authenticated" Postgres user
	 * name.
	 */
	pw = getpwuid(geteuid());
	if (pw == NULL)
	{
		fprintf(stderr, gettext("%s: invalid current euid %d\n"),
				new_argv[0], (int) geteuid());
		exit(1);
	}
	/* Allocate new memory because later getpwuid() calls can overwrite it */
	pw_name_persist = strdup(pw->pw_name);

	exit(PostgresMain(argc, new_argv, pw_name_persist));
}
