/*-------------------------------------------------------------------------
 *
 * elog.c
 *	  error logging and reporting
 *
 * Because of the extremely high rate at which log messages can be generated,
 * we need to be mindful of the performance cost of obtaining any information
 * that may be logged.  Also, it's important to keep in mind that this code may
 * get called from within an aborted transaction, in which case operations
 * such as syscache lookups are unsafe.
 *
 * Some notes about recursion and errors during error processing:
 *
 * We need to be robust about recursive-error scenarios --- for example,
 * if we run out of memory, it's important to be able to report that fact.
 * There are a number of considerations that go into this.
 *
 * First, distinguish between re-entrant use and actual recursion.  It
 * is possible for an error or warning message to be emitted while the
 * parameters for an error message are being computed.  In this case
 * errstart has been called for the outer message, and some field values
 * may have already been saved, but we are not actually recursing.  We handle
 * this by providing a (small) stack of ErrorData records.  The inner message
 * can be computed and sent without disturbing the state of the outer message.
 * (If the inner message is actually an error, this isn't very interesting
 * because control won't come back to the outer message generator ... but
 * if the inner message is only debug or log data, this is critical.)
 *
 * Second, actual recursion will occur if an error is reported by one of
 * the elog.c routines or something they call.  By far the most probable
 * scenario of this sort is "out of memory"; and it's also the nastiest
 * to handle because we'd likely also run out of memory while trying to
 * report this error!  Our escape hatch for this case is to reset the
 * ErrorContext to empty before trying to process the inner error.  Since
 * ErrorContext is guaranteed to have at least 8K of space in it (see mcxt.c),
 * we should be able to process an "out of memory" message successfully.
 * Since we lose the prior error state due to the reset, we won't be able
 * to return to processing the original error, but we wouldn't have anyway.
 * (NOTE: the escape hatch is not used for recursive situations where the
 * inner message is of less than ERROR severity; in that case we just
 * try to process it and return normally.  Usually this will work, but if
 * it ends up in infinite recursion, we will PANIC due to error stack
 * overflow.)
 *
 *
 * Portions Copyright (c) 1996-2014, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/utils/error/elog.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <fcntl.h>
#include <time.h>
#include <unistd.h>
#include <signal.h>
#include <ctype.h>
#ifdef HAVE_SYSLOG
#include <syslog.h>
#endif

#include "access/transam.h"
#include "access/xact.h"
#include "libpq/libpq.h"
#include "libpq/pqformat.h"
#include "mb/pg_wchar.h"
#include "miscadmin.h"
#include "postmaster/postmaster.h"
#include "postmaster/syslogger.h"
#include "storage/ipc.h"
#include "storage/proc.h"
#include "tcop/tcopprot.h"
#include "utils/guc.h"
#include "utils/memutils.h"
#include "utils/ps_status.h"


#undef _
#define _(x) err_gettext(x)

static const char *
err_gettext(const char *str)
/* This extension allows gcc to check the format string for consistency with
   the supplied arguments. */
__attribute__((format_arg(1)));
static void set_errdata_field(MemoryContextData *cxt, char **ptr, const char *str);

/* Global variables */
ErrorContextCallback *error_context_stack = NULL;

sigjmp_buf *PG_exception_stack = NULL;

extern bool redirection_done;

/*
 * Hook for intercepting messages before they are sent to the server log.
 * Note that the hook will not get called for messages that are suppressed
 * by log_min_messages.  Also note that logging hooks implemented in preload
 * libraries will miss any log messages that are generated before the
 * library is loaded.
 */
emit_log_hook_type emit_log_hook = NULL;

/* GUC parameters */
int			Log_error_verbosity = PGERROR_VERBOSE;
char	   *Log_line_prefix = NULL;		/* format for extra log line info */
int			Log_destination = LOG_DESTINATION_STDERR;
char	   *Log_destination_string = NULL;

#ifdef HAVE_SYSLOG

/*
 * Max string length to send to syslog().  Note that this doesn't count the
 * sequence-number prefix we add, and of course it doesn't count the prefix
 * added by syslog itself.  Solaris and sysklogd truncate the final message
 * at 1024 bytes, so this value leaves 124 bytes for those prefixes.  (Most
 * other syslog implementations seem to have limits of 2KB or so.)
 */
#ifndef PG_SYSLOG_LIMIT
#define PG_SYSLOG_LIMIT 900
#endif

static bool openlog_done = false;
static char *syslog_ident = NULL;
static int	syslog_facility = LOG_LOCAL0;

static void write_syslog(int level, const char *line);
#endif

static void write_console(const char *line, int len);

#ifdef WIN32
extern char *event_source;
static void write_eventlog(int level, const char *line, int len);
#endif

/* We provide a small stack of ErrorData records for re-entrant cases */
#define ERRORDATA_STACK_SIZE  5

static ErrorData errordata[ERRORDATA_STACK_SIZE];

static int	errordata_stack_depth = -1; /* index of topmost active frame */

static int	recursion_depth = 0;	/* to detect actual recursion */

/* buffers for formatted timestamps that might be used by both
 * log_line_prefix and csv logs.
 */

#define FORMATTED_TS_LEN 128
static char formatted_start_time[FORMATTED_TS_LEN];
static char formatted_log_time[FORMATTED_TS_LEN];


/* Macro for checking errordata_stack_depth is reasonable */
#define CHECK_STACK_DEPTH() \
	do { \
		if (errordata_stack_depth < 0) \
		{ \
			errordata_stack_depth = -1; \
			ereport(ERROR, (errmsg_internal("errstart was not called"))); \
		} \
	} while (0)


static const char *process_log_prefix_padding(const char *p, int *padding);
static void log_line_prefix(StringInfo buf, ErrorData *edata);
static void send_message_to_server_log(ErrorData *edata);
static void send_message_to_frontend(ErrorData *edata);
static char *expand_fmt_string(const char *fmt, ErrorData *edata);
static const char *useful_strerror(int errnum);
static const char *get_errno_symbol(int errnum);
static const char *error_severity(int elevel);
static void append_with_tabs(StringInfo buf, const char *str);
static bool is_log_level_output(int elevel, int log_min_level);
static void write_pipe_chunks(char *data, int len, int dest);
static void write_csvlog(ErrorData *edata);
static void setup_formatted_log_time(void);
static void setup_formatted_start_time(void);


/*
 * in_error_recursion_trouble --- are we at risk of infinite error recursion?
 *
 * This function exists to provide common control of various fallback steps
 * that we take if we think we are facing infinite error recursion.  See the
 * callers for details.
 */
bool
in_error_recursion_trouble(void)
{
	/* Pull the plug if recurse more than once */
	return (recursion_depth > 2);
}

/*
 * One of those fallback steps is to stop trying to localize the error
 * message, since there's a significant probability that that's exactly
 * what's causing the recursion.
 */
static inline const char *
err_gettext(const char *str)
{
#ifdef ENABLE_NLS
	if (in_error_recursion_trouble())
		return str;
	else
		return gettext(str);
#else
	return str;
#endif
}


/*
 * errstart --- begin an error-reporting cycle
 *
 * Create a stack entry and store the given parameters in it.  Subsequently,
 * errmsg() and perhaps other routines will be called to further populate
 * the stack entry.  Finally, errfinish() will be called to actually process
 * the error report.
 *
 * Returns TRUE in normal case.  Returns FALSE to short-circuit the error
 * report (if it's a warning or lower and not to be reported anywhere).
 */
bool
errstart(int elevel, const char *filename, int lineno,
		 const char *funcname, const char *domain)
{
	ErrorData  *edata;
	bool		output_to_server;
	bool		output_to_client = false;
	int			i;

	/*
	 * Check some cases in which we want to promote an error into a more
	 * severe error.  None of this logic applies for non-error messages.
	 */
	if (elevel >= ERROR)
	{
		/*
		 * If we are inside a critical section, all errors become PANIC
		 * errors.  See miscadmin.h.
		 */
		if (CritSectionCount > 0)
			elevel = PANIC;

		/*
		 * Check reasons for treating ERROR as FATAL:
		 *
		 * 1. we have no handler to pass the error to (implies we are in the
		 * postmaster or in backend startup).
		 *
		 * 2. ExitOnAnyError mode switch is set (initdb uses this).
		 *
		 * 3. the error occurred after proc_exit has begun to run.  (It's
		 * proc_exit's responsibility to see that this doesn't turn into
		 * infinite recursion!)
		 */
		if (elevel == ERROR)
		{
			if (PG_exception_stack == NULL ||
				ExitOnAnyError ||
				proc_exit_inprogress)
				elevel = FATAL;
		}

		/*
		 * If the error level is ERROR or more, errfinish is not going to
		 * return to caller; therefore, if there is any stacked error already
		 * in progress it will be lost.  This is more or less okay, except we
		 * do not want to have a FATAL or PANIC error downgraded because the
		 * reporting process was interrupted by a lower-grade error.  So check
		 * the stack and make sure we panic if panic is warranted.
		 */
		for (i = 0; i <= errordata_stack_depth; i++)
			elevel = Max(elevel, errordata[i].elevel);
	}

	/*
	 * Now decide whether we need to process this report at all; if it's
	 * warning or less and not enabled for logging, just return FALSE without
	 * starting up any error logging machinery.
	 */

	/* Determine whether message is enabled for server log output */
	output_to_server = is_log_level_output(elevel, log_min_messages);

	/* Determine whether message is enabled for client output */
	if (whereToSendOutput == DestRemote && elevel != COMMERROR)
	{
		/*
		 * client_min_messages is honored only after we complete the
		 * authentication handshake.  This is required both for security
		 * reasons and because many clients can't handle NOTICE messages
		 * during authentication.
		 */
		if (ClientAuthInProgress)
			output_to_client = (elevel >= ERROR);
		else
			output_to_client = (elevel >= client_min_messages ||
								elevel == INFO);
	}

	/* Skip processing effort if non-error message will not be output */
	if (elevel < ERROR && !output_to_server && !output_to_client)
		return false;

	/*
	 * We need to do some actual work.  Make sure that memory context
	 * initialization has finished, else we can't do anything useful.
	 */
	if (ErrorContext == NULL)
	{
		/* Ooops, hard crash time; very little we can do safely here */
		write_stderr("error occurred at %s:%d before error message processing is available\n",
					 filename ? filename : "(unknown file)", lineno);
		exit(2);
	}

	/*
	 * Okay, crank up a stack entry to store the info in.
	 */

	if (recursion_depth++ > 0 && elevel >= ERROR)
	{
		/*
		 * Ooops, error during error processing.  Clear ErrorContext as
		 * discussed at top of file.  We will not return to the original
		 * error's reporter or handler, so we don't need it.
		 */
		MemoryContextReset(ErrorContext);

		/*
		 * Infinite error recursion might be due to something broken in a
		 * context traceback routine.  Abandon them too.  We also abandon
		 * attempting to print the error statement (which, if long, could
		 * itself be the source of the recursive failure).
		 */
		if (in_error_recursion_trouble())
		{
			error_context_stack = NULL;
			debug_query_string = NULL;
		}
	}
	if (++errordata_stack_depth >= ERRORDATA_STACK_SIZE)
	{
		/*
		 * Wups, stack not big enough.  We treat this as a PANIC condition
		 * because it suggests an infinite loop of errors during error
		 * recovery.
		 */
		errordata_stack_depth = -1;		/* make room on stack */
		ereport(PANIC, (errmsg_internal("ERRORDATA_STACK_SIZE exceeded")));
	}

	/* Initialize data for this error frame */
	edata = &errordata[errordata_stack_depth];
	MemSet(edata, 0, sizeof(ErrorData));
	edata->elevel = elevel;
	edata->output_to_server = output_to_server;
	edata->output_to_client = output_to_client;
	if (filename)
	{
		const char *slash;

		/* keep only base name, useful especially for vpath builds */
		slash = strrchr(filename, '/');
		if (slash)
			filename = slash + 1;
	}
	edata->filename = filename;
	edata->lineno = lineno;
	edata->funcname = funcname;
	/* the default text domain is the backend's */
	edata->domain = domain ? domain : PG_TEXTDOMAIN("postgres");
	/* Select default errcode based on elevel */
	if (elevel >= ERROR)
		edata->sqlerrcode = ERRCODE_INTERNAL_ERROR;
	else if (elevel == WARNING)
		edata->sqlerrcode = ERRCODE_WARNING;
	else
		edata->sqlerrcode = ERRCODE_SUCCESSFUL_COMPLETION;
	/* errno is saved here so that error parameter eval can't change it */
	edata->saved_errno = errno;

	/*
	 * Any allocations for this error state level should go into ErrorContext
	 */
	edata->assoc_context = ErrorContext;

	recursion_depth--;
	return true;
}

/*
 * errfinish --- end an error-reporting cycle
 *
 * Produce the appropriate error report(s) and pop the error stack.
 *
 * If elevel is ERROR or worse, control does not return to the caller.
 * See elog.h for the error level definitions.
 */
void
errfinish(int dummy,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	int			elevel;
	bool		save_ImmediateInterruptOK;
	MemoryContext oldcontext;
	ErrorContextCallback *econtext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	elevel = edata->elevel;

	/*
	 * Ensure we can't get interrupted while performing error reporting.  This
	 * is needed to prevent recursive entry to functions like syslog(), which
	 * may not be re-entrant.
	 *
	 * Note: other places that save-and-clear ImmediateInterruptOK also do
	 * HOLD_INTERRUPTS(), but that should not be necessary here since we don't
	 * call anything that could turn on ImmediateInterruptOK.
	 */
	save_ImmediateInterruptOK = ImmediateInterruptOK;
	ImmediateInterruptOK = false;

	/*
	 * Do processing in ErrorContext, which we hope has enough reserved space
	 * to report an error.
	 */
	oldcontext = MemoryContextSwitchTo(ErrorContext);

	/*
	 * Call any context callback functions.  Errors occurring in callback
	 * functions will be treated as recursive errors --- this ensures we will
	 * avoid infinite recursion (see errstart).
	 */
	for (econtext = error_context_stack;
		 econtext != NULL;
		 econtext = econtext->previous)
		(*econtext->callback) (econtext->arg);

	/*
	 * If ERROR (not more nor less) we pass it off to the current handler.
	 * Printing it and popping the stack is the responsibility of the handler.
	 */
	if (elevel == ERROR)
	{
		/*
		 * We do some minimal cleanup before longjmp'ing so that handlers can
		 * execute in a reasonably sane state.
		 *
		 * Reset InterruptHoldoffCount in case we ereport'd from inside an
		 * interrupt holdoff section.  (We assume here that no handler will
		 * itself be inside a holdoff section.  If necessary, such a handler
		 * could save and restore InterruptHoldoffCount for itself, but this
		 * should make life easier for most.)
		 *
		 * Note that we intentionally don't restore ImmediateInterruptOK here,
		 * even if it was set at entry.  We definitely don't want that on
		 * while doing error cleanup.
		 */
		InterruptHoldoffCount = 0;

		CritSectionCount = 0;	/* should be unnecessary, but... */

		/*
		 * Note that we leave CurrentMemoryContext set to ErrorContext. The
		 * handler should reset it to something else soon.
		 */

		recursion_depth--;
		PG_RE_THROW();
	}

	/*
	 * If we are doing FATAL or PANIC, abort any old-style COPY OUT in
	 * progress, so that we can report the message before dying.  (Without
	 * this, pq_putmessage will refuse to send the message at all, which is
	 * what we want for NOTICE messages, but not for fatal exits.) This hack
	 * is necessary because of poor design of old-style copy protocol.  Note
	 * we must do this even if client is fool enough to have set
	 * client_min_messages above FATAL, so don't look at output_to_client.
	 */
	if (elevel >= FATAL && whereToSendOutput == DestRemote)
		pq_endcopyout(true);

	/* Emit the message to the right places */
	EmitErrorReport();

	/* Now free up subsidiary data attached to stack entry, and release it */
	if (edata->message)
		pfree(edata->message);
	if (edata->detail)
		pfree(edata->detail);
	if (edata->detail_log)
		pfree(edata->detail_log);
	if (edata->hint)
		pfree(edata->hint);
	if (edata->context)
		pfree(edata->context);
	if (edata->schema_name)
		pfree(edata->schema_name);
	if (edata->table_name)
		pfree(edata->table_name);
	if (edata->column_name)
		pfree(edata->column_name);
	if (edata->datatype_name)
		pfree(edata->datatype_name);
	if (edata->constraint_name)
		pfree(edata->constraint_name);
	if (edata->internalquery)
		pfree(edata->internalquery);

	errordata_stack_depth--;

	/* Exit error-handling context */
	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;

	/*
	 * Perform error recovery action as specified by elevel.
	 */
	if (elevel == FATAL)
	{
		/*
		 * For a FATAL error, we let proc_exit clean up and exit.
		 *
		 * If we just reported a startup failure, the client will disconnect
		 * on receiving it, so don't send any more to the client.
		 */
		if (PG_exception_stack == NULL && whereToSendOutput == DestRemote)
			whereToSendOutput = DestNone;

		/*
		 * fflush here is just to improve the odds that we get to see the
		 * error message, in case things are so hosed that proc_exit crashes.
		 * Any other code you might be tempted to add here should probably be
		 * in an on_proc_exit or on_shmem_exit callback instead.
		 */
		fflush(stdout);
		fflush(stderr);

		/*
		 * Do normal process-exit cleanup, then return exit code 1 to indicate
		 * FATAL termination.  The postmaster may or may not consider this
		 * worthy of panic, depending on which subprocess returns it.
		 */
		proc_exit(1);
	}

	if (elevel >= PANIC)
	{
		/*
		 * Serious crash time. Postmaster will observe SIGABRT process exit
		 * status and kill the other backends too.
		 *
		 * XXX: what if we are *in* the postmaster?  abort() won't kill our
		 * children...
		 */
		fflush(stdout);
		fflush(stderr);
		abort();
	}

	/*
	 * We reach here if elevel <= WARNING.  OK to return to caller, so restore
	 * caller's setting of ImmediateInterruptOK.
	 */
	ImmediateInterruptOK = save_ImmediateInterruptOK;

	/*
	 * But check for cancel/die interrupt first --- this is so that the user
	 * can stop a query emitting tons of notice or warning messages, even if
	 * it's in a loop that otherwise fails to check for interrupts.
	 */
	CHECK_FOR_INTERRUPTS();
}


/*
 * errcode --- add SQLSTATE error code to the current error
 *
 * The code is expected to be represented as per MAKE_SQLSTATE().
 */
int
errcode(int sqlerrcode)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	edata->sqlerrcode = sqlerrcode;

	return 0;					/* return value does not matter */
}


/*
 * errcode_for_file_access --- add SQLSTATE error code to the current error
 *
 * The SQLSTATE code is chosen based on the saved errno value.  We assume
 * that the failing operation was some type of disk file access.
 *
 * NOTE: the primary error message string should generally include %m
 * when this is used.
 */
int
errcode_for_file_access(void)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	switch (edata->saved_errno)
	{
			/* Permission-denied failures */
		case EPERM:				/* Not super-user */
		case EACCES:			/* Permission denied */
#ifdef EROFS
		case EROFS:				/* Read only file system */
#endif
			edata->sqlerrcode = ERRCODE_INSUFFICIENT_PRIVILEGE;
			break;

			/* File not found */
		case ENOENT:			/* No such file or directory */
			edata->sqlerrcode = ERRCODE_UNDEFINED_FILE;
			break;

			/* Duplicate file */
		case EEXIST:			/* File exists */
			edata->sqlerrcode = ERRCODE_DUPLICATE_FILE;
			break;

			/* Wrong object type or state */
		case ENOTDIR:			/* Not a directory */
		case EISDIR:			/* Is a directory */
#if defined(ENOTEMPTY) && (ENOTEMPTY != EEXIST) /* same code on AIX */
		case ENOTEMPTY: /* Directory not empty */
#endif
			edata->sqlerrcode = ERRCODE_WRONG_OBJECT_TYPE;
			break;

			/* Insufficient resources */
		case ENOSPC:			/* No space left on device */
			edata->sqlerrcode = ERRCODE_DISK_FULL;
			break;

		case ENFILE:			/* File table overflow */
		case EMFILE:			/* Too many open files */
			edata->sqlerrcode = ERRCODE_INSUFFICIENT_RESOURCES;
			break;

			/* Hardware failure */
		case EIO:				/* I/O error */
			edata->sqlerrcode = ERRCODE_IO_ERROR;
			break;

			/* All else is classified as internal errors */
		default:
			edata->sqlerrcode = ERRCODE_INTERNAL_ERROR;
			break;
	}

	return 0;					/* return value does not matter */
}

/*
 * errcode_for_socket_access --- add SQLSTATE error code to the current error
 *
 * The SQLSTATE code is chosen based on the saved errno value.  We assume
 * that the failing operation was some type of socket access.
 *
 * NOTE: the primary error message string should generally include %m
 * when this is used.
 */
int
errcode_for_socket_access(void)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	switch (edata->saved_errno)
	{
			/* Loss of connection */
		case EPIPE:
#ifdef ECONNRESET
		case ECONNRESET:
#endif
			edata->sqlerrcode = ERRCODE_CONNECTION_FAILURE;
			break;

			/* All else is classified as internal errors */
		default:
			edata->sqlerrcode = ERRCODE_INTERNAL_ERROR;
			break;
	}

	return 0;					/* return value does not matter */
}


/*
 * This macro handles expansion of a format string and associated parameters;
 * it's common code for errmsg(), errdetail(), etc.  Must be called inside
 * a routine that is declared like "const char *fmt, ..." and has an edata
 * pointer set up.  The message is assigned to edata->targetfield, or
 * appended to it if appendval is true.  The message is subject to translation
 * if translateit is true.
 *
 * Note: we pstrdup the buffer rather than just transferring its storage
 * to the edata field because the buffer might be considerably larger than
 * really necessary.
 */
#define EVALUATE_MESSAGE(domain, targetfield, appendval, translateit)	\
	{ \
		char		   *fmtbuf; \
		StringInfoData	buf; \
		/* Internationalize the error format string */ \
		if (translateit && !in_error_recursion_trouble()) \
			fmt = dgettext((domain), fmt);				  \
		/* Expand %m in format string */ \
		fmtbuf = expand_fmt_string(fmt, edata); \
		initStringInfo(&buf); \
		if ((appendval) && edata->targetfield) { \
			appendStringInfoString(&buf, edata->targetfield); \
			appendStringInfoChar(&buf, '\n'); \
		} \
		/* Generate actual output --- have to use appendStringInfoVA */ \
		for (;;) \
		{ \
			va_list		args; \
			int			needed; \
			va_start(args, fmt); \
			needed = appendStringInfoVA(&buf, fmtbuf, args); \
			va_end(args); \
			if (needed == 0) \
				break; \
			enlargeStringInfo(&buf, needed); \
		} \
		/* Done with expanded fmt */ \
		pfree(fmtbuf); \
		/* Save the completed message into the stack item */ \
		if (edata->targetfield) \
			pfree(edata->targetfield); \
		edata->targetfield = pstrdup(buf.data); \
		pfree(buf.data); \
	}

/*
 * Same as above, except for pluralized error messages.  The calling routine
 * must be declared like "const char *fmt_singular, const char *fmt_plural,
 * unsigned long n, ...".  Translation is assumed always wanted.
 */
#define EVALUATE_MESSAGE_PLURAL(domain, targetfield, appendval)  \
	{ \
		const char	   *fmt; \
		char		   *fmtbuf; \
		StringInfoData	buf; \
		/* Internationalize the error format string */ \
		if (!in_error_recursion_trouble()) \
			fmt = dngettext((domain), fmt_singular, fmt_plural, n); \
		else \
			fmt = (n == 1 ? fmt_singular : fmt_plural); \
		/* Expand %m in format string */ \
		fmtbuf = expand_fmt_string(fmt, edata); \
		initStringInfo(&buf); \
		if ((appendval) && edata->targetfield) { \
			appendStringInfoString(&buf, edata->targetfield); \
			appendStringInfoChar(&buf, '\n'); \
		} \
		/* Generate actual output --- have to use appendStringInfoVA */ \
		for (;;) \
		{ \
			va_list		args; \
			int			needed; \
			va_start(args, n); \
			needed = appendStringInfoVA(&buf, fmtbuf, args); \
			va_end(args); \
			if (needed == 0) \
				break; \
			enlargeStringInfo(&buf, needed); \
		} \
		/* Done with expanded fmt */ \
		pfree(fmtbuf); \
		/* Save the completed message into the stack item */ \
		if (edata->targetfield) \
			pfree(edata->targetfield); \
		edata->targetfield = pstrdup(buf.data); \
		pfree(buf.data); \
	}


/*
 * errmsg --- add a primary error message text to the current error
 *
 * In addition to the usual %-escapes recognized by printf, "%m" in
 * fmt is replaced by the error message for the caller's value of errno.
 *
 * Note: no newline is needed at the end of the fmt string, since
 * ereport will provide one for the output methods that need it.
 */
int
errmsg(const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->domain, message, false, true);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errmsg_internal --- add a primary error message text to the current error
 *
 * This is exactly like errmsg() except that strings passed to errmsg_internal
 * are not translated, and are customarily left out of the
 * internationalization message dictionary.  This should be used for "can't
 * happen" cases that are probably not worth spending translation effort on.
 * We also use this for certain cases where we *must* not try to translate
 * the message because the translation would fail and result in infinite
 * error recursion.
 */
int
errmsg_internal(const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->domain, message, false, false);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errmsg_plural --- add a primary error message text to the current error,
 * with support for pluralization of the message text
 */
int
errmsg_plural(const char *fmt_singular, const char *fmt_plural,
			  unsigned long n,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE_PLURAL(edata->domain, message, false);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errdetail --- add a detail error message text to the current error
 */
int
errdetail(const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->domain, detail, false, true);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errdetail_internal --- add a detail error message text to the current error
 *
 * This is exactly like errdetail() except that strings passed to
 * errdetail_internal are not translated, and are customarily left out of the
 * internationalization message dictionary.  This should be used for detail
 * messages that seem not worth translating for one reason or another
 * (typically, that they don't seem to be useful to average users).
 */
int
errdetail_internal(const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->domain, detail, false, false);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errdetail_log --- add a detail_log error message text to the current error
 */
int
errdetail_log(const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->domain, detail_log, false, true);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}

/*
 * errdetail_log_plural --- add a detail_log error message text to the current error
 * with support for pluralization of the message text
 */
int
errdetail_log_plural(const char *fmt_singular, const char *fmt_plural,
					 unsigned long n,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE_PLURAL(edata->domain, detail_log, false);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errdetail_plural --- add a detail error message text to the current error,
 * with support for pluralization of the message text
 */
int
errdetail_plural(const char *fmt_singular, const char *fmt_plural,
				 unsigned long n,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE_PLURAL(edata->domain, detail, false);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errhint --- add a hint error message text to the current error
 */
int
errhint(const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->domain, hint, false, true);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}


/*
 * errcontext_msg --- add a context error message text to the current error
 *
 * Unlike other cases, multiple calls are allowed to build up a stack of
 * context information.  We assume earlier calls represent more-closely-nested
 * states.
 */
int
errcontext_msg(const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->context_domain, context, true, true);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
	return 0;					/* return value does not matter */
}

/*
 * set_errcontext_domain --- set message domain to be used by errcontext()
 *
 * errcontext_msg() can be called from a different module than the original
 * ereport(), so we cannot use the message domain passed in errstart() to
 * translate it.  Instead, each errcontext_msg() call should be preceded by
 * a set_errcontext_domain() call to specify the domain.  This is usually
 * done transparently by the errcontext() macro.
 */
int
set_errcontext_domain(const char *domain)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	edata->context_domain = domain;

	return 0;					/* return value does not matter */
}


/*
 * errhidestmt --- optionally suppress STATEMENT: field of log entry
 *
 * This should be called if the message text already includes the statement.
 */
int
errhidestmt(bool hide_stmt)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	edata->hide_stmt = hide_stmt;

	return 0;					/* return value does not matter */
}

/*
 * errhidestmt --- optionally suppress CONTEXT: field of log entry
 *
 * This should only be used for verbose debugging messages where the repeated
 * inclusion of CONTEXT: bloats the log volume too much.
 */
int
errhidecontext(bool hide_ctx)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	edata->hide_ctx = hide_ctx;

	return 0;					/* return value does not matter */
}


/*
 * errfunction --- add reporting function name to the current error
 *
 * This is used when backwards compatibility demands that the function
 * name appear in messages sent to old-protocol clients.  Note that the
 * passed string is expected to be a non-freeable constant string.
 */
int
errfunction(const char *funcname)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	edata->funcname = funcname;
	edata->show_funcname = true;

	return 0;					/* return value does not matter */
}

/*
 * errposition --- add cursor position to the current error
 */
int
errposition(int cursorpos)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	edata->cursorpos = cursorpos;

	return 0;					/* return value does not matter */
}

/*
 * internalerrposition --- add internal cursor position to the current error
 */
int
internalerrposition(int cursorpos)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	edata->internalpos = cursorpos;

	return 0;					/* return value does not matter */
}

/*
 * internalerrquery --- add internal query text to the current error
 *
 * Can also pass NULL to drop the internal query text entry.  This case
 * is intended for use in error callback subroutines that are editorializing
 * on the layout of the error report.
 */
int
internalerrquery(const char *query)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	if (edata->internalquery)
	{
		pfree(edata->internalquery);
		edata->internalquery = NULL;
	}

	if (query)
		edata->internalquery = MemoryContextStrdup(edata->assoc_context, query);

	return 0;					/* return value does not matter */
}

/*
 * err_generic_string -- used to set individual ErrorData string fields
 * identified by PG_DIAG_xxx codes.
 *
 * This intentionally only supports fields that don't use localized strings,
 * so that there are no translation considerations.
 *
 * Most potential callers should not use this directly, but instead prefer
 * higher-level abstractions, such as errtablecol() (see relcache.c).
 */
int
err_generic_string(int field, const char *str)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	switch (field)
	{
		case PG_DIAG_SCHEMA_NAME:
			set_errdata_field(edata->assoc_context, &edata->schema_name, str);
			break;
		case PG_DIAG_TABLE_NAME:
			set_errdata_field(edata->assoc_context, &edata->table_name, str);
			break;
		case PG_DIAG_COLUMN_NAME:
			set_errdata_field(edata->assoc_context, &edata->column_name, str);
			break;
		case PG_DIAG_DATATYPE_NAME:
			set_errdata_field(edata->assoc_context, &edata->datatype_name, str);
			break;
		case PG_DIAG_CONSTRAINT_NAME:
			set_errdata_field(edata->assoc_context, &edata->constraint_name, str);
			break;
		default:
			elog(ERROR, "unsupported ErrorData field id: %d", field);
			break;
	}

	return 0;					/* return value does not matter */
}

/*
 * set_errdata_field --- set an ErrorData string field
 */
static void
set_errdata_field(MemoryContextData *cxt, char **ptr, const char *str)
{
	Assert(*ptr == NULL);
	*ptr = MemoryContextStrdup(cxt, str);
}

/*
 * geterrcode --- return the currently set SQLSTATE error code
 *
 * This is only intended for use in error callback subroutines, since there
 * is no other place outside elog.c where the concept is meaningful.
 */
int
geterrcode(void)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	return edata->sqlerrcode;
}

/*
 * geterrposition --- return the currently set error position (0 if none)
 *
 * This is only intended for use in error callback subroutines, since there
 * is no other place outside elog.c where the concept is meaningful.
 */
int
geterrposition(void)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	return edata->cursorpos;
}

/*
 * getinternalerrposition --- same for internal error position
 *
 * This is only intended for use in error callback subroutines, since there
 * is no other place outside elog.c where the concept is meaningful.
 */
int
getinternalerrposition(void)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];

	/* we don't bother incrementing recursion_depth */
	CHECK_STACK_DEPTH();

	return edata->internalpos;
}


/*
 * elog_start --- startup for old-style API
 *
 * All that we do here is stash the hidden filename/lineno/funcname
 * arguments into a stack entry, along with the current value of errno.
 *
 * We need this to be separate from elog_finish because there's no other
 * C89-compliant way to deal with inserting extra arguments into the elog
 * call.  (When using C99's __VA_ARGS__, we could possibly merge this with
 * elog_finish, but there doesn't seem to be a good way to save errno before
 * evaluating the format arguments if we do that.)
 */
void
elog_start(const char *filename, int lineno, const char *funcname)
{
	ErrorData  *edata;

	/* Make sure that memory context initialization has finished */
	if (ErrorContext == NULL)
	{
		/* Ooops, hard crash time; very little we can do safely here */
		write_stderr("error occurred at %s:%d before error message processing is available\n",
					 filename ? filename : "(unknown file)", lineno);
		exit(2);
	}

	if (++errordata_stack_depth >= ERRORDATA_STACK_SIZE)
	{
		/*
		 * Wups, stack not big enough.  We treat this as a PANIC condition
		 * because it suggests an infinite loop of errors during error
		 * recovery.  Note that the message is intentionally not localized,
		 * else failure to convert it to client encoding could cause further
		 * recursion.
		 */
		errordata_stack_depth = -1;		/* make room on stack */
		ereport(PANIC, (errmsg_internal("ERRORDATA_STACK_SIZE exceeded")));
	}

	edata = &errordata[errordata_stack_depth];
	if (filename)
	{
		const char *slash;

		/* keep only base name, useful especially for vpath builds */
		slash = strrchr(filename, '/');
		if (slash)
			filename = slash + 1;
	}
	edata->filename = filename;
	edata->lineno = lineno;
	edata->funcname = funcname;
	/* errno is saved now so that error parameter eval can't change it */
	edata->saved_errno = errno;

	/* Use ErrorContext for any allocations done at this level. */
	edata->assoc_context = ErrorContext;
}

/*
 * elog_finish --- finish up for old-style API
 */
void
elog_finish(int elevel, const char *fmt,...)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	CHECK_STACK_DEPTH();

	/*
	 * Do errstart() to see if we actually want to report the message.
	 */
	errordata_stack_depth--;
	errno = edata->saved_errno;
	if (!errstart(elevel, edata->filename, edata->lineno, edata->funcname, NULL))
		return;					/* nothing to do */

	/*
	 * Format error message just like errmsg_internal().
	 */
	recursion_depth++;
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	EVALUATE_MESSAGE(edata->domain, message, false, false);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;

	/*
	 * And let errfinish() finish up.
	 */
	errfinish(0);
}


/*
 * Functions to allow construction of error message strings separately from
 * the ereport() call itself.
 *
 * The expected calling convention is
 *
 *	pre_format_elog_string(errno, domain), var = format_elog_string(format,...)
 *
 * which can be hidden behind a macro such as GUC_check_errdetail().  We
 * assume that any functions called in the arguments of format_elog_string()
 * cannot result in re-entrant use of these functions --- otherwise the wrong
 * text domain might be used, or the wrong errno substituted for %m.  This is
 * okay for the current usage with GUC check hooks, but might need further
 * effort someday.
 *
 * The result of format_elog_string() is stored in ErrorContext, and will
 * therefore survive until FlushErrorState() is called.
 */
static int	save_format_errnumber;
static const char *save_format_domain;

void
pre_format_elog_string(int errnumber, const char *domain)
{
	/* Save errno before evaluation of argument functions can change it */
	save_format_errnumber = errnumber;
	/* Save caller's text domain */
	save_format_domain = domain;
}

char *
format_elog_string(const char *fmt,...)
{
	ErrorData	errdata;
	ErrorData  *edata;
	MemoryContext oldcontext;

	/* Initialize a mostly-dummy error frame */
	edata = &errdata;
	MemSet(edata, 0, sizeof(ErrorData));
	/* the default text domain is the backend's */
	edata->domain = save_format_domain ? save_format_domain : PG_TEXTDOMAIN("postgres");
	/* set the errno to be used to interpret %m */
	edata->saved_errno = save_format_errnumber;

	oldcontext = MemoryContextSwitchTo(ErrorContext);

	EVALUATE_MESSAGE(edata->domain, message, false, true);

	MemoryContextSwitchTo(oldcontext);

	return edata->message;
}


/*
 * Actual output of the top-of-stack error message
 *
 * In the ereport(ERROR) case this is called from PostgresMain (or not at all,
 * if the error is caught by somebody).  For all other severity levels this
 * is called by errfinish.
 */
void
EmitErrorReport(void)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	MemoryContext oldcontext;

	recursion_depth++;
	CHECK_STACK_DEPTH();
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	/*
	 * Call hook before sending message to log.  The hook function is allowed
	 * to turn off edata->output_to_server, so we must recheck that afterward.
	 * Making any other change in the content of edata is not considered
	 * supported.
	 *
	 * Note: the reason why the hook can only turn off output_to_server, and
	 * not turn it on, is that it'd be unreliable: we will never get here at
	 * all if errstart() deems the message uninteresting.  A hook that could
	 * make decisions in that direction would have to hook into errstart(),
	 * where it would have much less information available.  emit_log_hook is
	 * intended for custom log filtering and custom log message transmission
	 * mechanisms.
	 */
	if (edata->output_to_server && emit_log_hook)
		(*emit_log_hook) (edata);

	/* Send to server log, if enabled */
	if (edata->output_to_server)
		send_message_to_server_log(edata);

	/* Send to client, if enabled */
	if (edata->output_to_client)
		send_message_to_frontend(edata);

	MemoryContextSwitchTo(oldcontext);
	recursion_depth--;
}

/*
 * CopyErrorData --- obtain a copy of the topmost error stack entry
 *
 * This is only for use in error handler code.  The data is copied into the
 * current memory context, so callers should always switch away from
 * ErrorContext first; otherwise it will be lost when FlushErrorState is done.
 */
ErrorData *
CopyErrorData(void)
{
	ErrorData  *edata = &errordata[errordata_stack_depth];
	ErrorData  *newedata;

	/*
	 * we don't increment recursion_depth because out-of-memory here does not
	 * indicate a problem within the error subsystem.
	 */
	CHECK_STACK_DEPTH();

	Assert(CurrentMemoryContext != ErrorContext);

	/* Copy the struct itself */
	newedata = (ErrorData *) palloc(sizeof(ErrorData));
	memcpy(newedata, edata, sizeof(ErrorData));

	/* Make copies of separately-allocated fields */
	if (newedata->message)
		newedata->message = pstrdup(newedata->message);
	if (newedata->detail)
		newedata->detail = pstrdup(newedata->detail);
	if (newedata->detail_log)
		newedata->detail_log = pstrdup(newedata->detail_log);
	if (newedata->hint)
		newedata->hint = pstrdup(newedata->hint);
	if (newedata->context)
		newedata->context = pstrdup(newedata->context);
	if (newedata->schema_name)
		newedata->schema_name = pstrdup(newedata->schema_name);
	if (newedata->table_name)
		newedata->table_name = pstrdup(newedata->table_name);
	if (newedata->column_name)
		newedata->column_name = pstrdup(newedata->column_name);
	if (newedata->datatype_name)
		newedata->datatype_name = pstrdup(newedata->datatype_name);
	if (newedata->constraint_name)
		newedata->constraint_name = pstrdup(newedata->constraint_name);
	if (newedata->internalquery)
		newedata->internalquery = pstrdup(newedata->internalquery);

	/* Use the calling context for string allocation */
	newedata->assoc_context = CurrentMemoryContext;

	return newedata;
}

/*
 * FreeErrorData --- free the structure returned by CopyErrorData.
 *
 * Error handlers should use this in preference to assuming they know all
 * the separately-allocated fields.
 */
void
FreeErrorData(ErrorData *edata)
{
	if (edata->message)
		pfree(edata->message);
	if (edata->detail)
		pfree(edata->detail);
	if (edata->detail_log)
		pfree(edata->detail_log);
	if (edata->hint)
		pfree(edata->hint);
	if (edata->context)
		pfree(edata->context);
	if (edata->schema_name)
		pfree(edata->schema_name);
	if (edata->table_name)
		pfree(edata->table_name);
	if (edata->column_name)
		pfree(edata->column_name);
	if (edata->datatype_name)
		pfree(edata->datatype_name);
	if (edata->constraint_name)
		pfree(edata->constraint_name);
	if (edata->internalquery)
		pfree(edata->internalquery);
	pfree(edata);
}

/*
 * FlushErrorState --- flush the error state after error recovery
 *
 * This should be called by an error handler after it's done processing
 * the error; or as soon as it's done CopyErrorData, if it intends to
 * do stuff that is likely to provoke another error.  You are not "out" of
 * the error subsystem until you have done this.
 */
void
FlushErrorState(void)
{
	/*
	 * Reset stack to empty.  The only case where it would be more than one
	 * deep is if we serviced an error that interrupted construction of
	 * another message.  We assume control escaped out of that message
	 * construction and won't ever go back.
	 */
	errordata_stack_depth = -1;
	recursion_depth = 0;
	/* Delete all data in ErrorContext */
	MemoryContextResetAndDeleteChildren(ErrorContext);
}

/*
 * ThrowErrorData --- report an error described by an ErrorData structure
 *
 * This is intended to be used to re-report errors originally thrown by
 * background worker processes and then propagated (with or without
 * modification) to the backend responsible for them.
 */
void
ThrowErrorData(ErrorData *edata)
{
	ErrorData *newedata;
	MemoryContext	oldcontext;

	if (!errstart(edata->elevel, edata->filename, edata->lineno,
				  edata->funcname, NULL))
		return;

	newedata = &errordata[errordata_stack_depth];
	oldcontext = MemoryContextSwitchTo(edata->assoc_context);

	/* Copy the supplied fields to the error stack. */
	if (edata->sqlerrcode > 0)
		newedata->sqlerrcode = edata->sqlerrcode;
	if (edata->message)
		newedata->message = pstrdup(edata->message);
	if (edata->detail)
		newedata->detail = pstrdup(edata->detail);
	if (edata->detail_log)
		newedata->detail_log = pstrdup(edata->detail_log);
	if (edata->hint)
		newedata->hint = pstrdup(edata->hint);
	if (edata->context)
		newedata->context = pstrdup(edata->context);
	if (edata->schema_name)
		newedata->schema_name = pstrdup(edata->schema_name);
	if (edata->table_name)
		newedata->table_name = pstrdup(edata->table_name);
	if (edata->column_name)
		newedata->column_name = pstrdup(edata->column_name);
	if (edata->datatype_name)
		newedata->datatype_name = pstrdup(edata->datatype_name);
	if (edata->constraint_name)
		newedata->constraint_name = pstrdup(edata->constraint_name);
	if (edata->internalquery)
		newedata->internalquery = pstrdup(edata->internalquery);

	MemoryContextSwitchTo(oldcontext);

	errfinish(0);
}

/*
 * ReThrowError --- re-throw a previously copied error
 *
 * A handler can do CopyErrorData/FlushErrorState to get out of the error
 * subsystem, then do some processing, and finally ReThrowError to re-throw
 * the original error.  This is slower than just PG_RE_THROW() but should
 * be used if the "some processing" is likely to incur another error.
 */
void
ReThrowError(ErrorData *edata)
{
	ErrorData  *newedata;

	Assert(edata->elevel == ERROR);

	/* Push the data back into the error context */
	recursion_depth++;
	MemoryContextSwitchTo(ErrorContext);

	if (++errordata_stack_depth >= ERRORDATA_STACK_SIZE)
	{
		/*
		 * Wups, stack not big enough.  We treat this as a PANIC condition
		 * because it suggests an infinite loop of errors during error
		 * recovery.
		 */
		errordata_stack_depth = -1;		/* make room on stack */
		ereport(PANIC, (errmsg_internal("ERRORDATA_STACK_SIZE exceeded")));
	}

	newedata = &errordata[errordata_stack_depth];
	memcpy(newedata, edata, sizeof(ErrorData));

	/* Make copies of separately-allocated fields */
	if (newedata->message)
		newedata->message = pstrdup(newedata->message);
	if (newedata->detail)
		newedata->detail = pstrdup(newedata->detail);
	if (newedata->detail_log)
		newedata->detail_log = pstrdup(newedata->detail_log);
	if (newedata->hint)
		newedata->hint = pstrdup(newedata->hint);
	if (newedata->context)
		newedata->context = pstrdup(newedata->context);
	if (newedata->schema_name)
		newedata->schema_name = pstrdup(newedata->schema_name);
	if (newedata->table_name)
		newedata->table_name = pstrdup(newedata->table_name);
	if (newedata->column_name)
		newedata->column_name = pstrdup(newedata->column_name);
	if (newedata->datatype_name)
		newedata->datatype_name = pstrdup(newedata->datatype_name);
	if (newedata->constraint_name)
		newedata->constraint_name = pstrdup(newedata->constraint_name);
	if (newedata->internalquery)
		newedata->internalquery = pstrdup(newedata->internalquery);

	/* Reset the assoc_context to be ErrorContext */
	newedata->assoc_context = ErrorContext;

	recursion_depth--;
	PG_RE_THROW();
}

/*
 * pg_re_throw --- out-of-line implementation of PG_RE_THROW() macro
 */
void
pg_re_throw(void)
{
	/* If possible, throw the error to the next outer setjmp handler */
	if (PG_exception_stack != NULL)
		siglongjmp(*PG_exception_stack, 1);
	else
	{
		/*
		 * If we get here, elog(ERROR) was thrown inside a PG_TRY block, which
		 * we have now exited only to discover that there is no outer setjmp
		 * handler to pass the error to.  Had the error been thrown outside
		 * the block to begin with, we'd have promoted the error to FATAL, so
		 * the correct behavior is to make it FATAL now; that is, emit it and
		 * then call proc_exit.
		 */
		ErrorData  *edata = &errordata[errordata_stack_depth];

		Assert(errordata_stack_depth >= 0);
		Assert(edata->elevel == ERROR);
		edata->elevel = FATAL;

		/*
		 * At least in principle, the increase in severity could have changed
		 * where-to-output decisions, so recalculate.  This should stay in
		 * sync with errstart(), which see for comments.
		 */
		if (IsPostmasterEnvironment)
			edata->output_to_server = is_log_level_output(FATAL,
														  log_min_messages);
		else
			edata->output_to_server = (FATAL >= log_min_messages);
		if (whereToSendOutput == DestRemote)
		{
			if (ClientAuthInProgress)
				edata->output_to_client = true;
			else
				edata->output_to_client = (FATAL >= client_min_messages);
		}

		/*
		 * We can use errfinish() for the rest, but we don't want it to call
		 * any error context routines a second time.  Since we know we are
		 * about to exit, it should be OK to just clear the context stack.
		 */
		error_context_stack = NULL;

		errfinish(0);
	}

	/* Doesn't return ... */
	ExceptionalCondition("pg_re_throw tried to return", "FailedAssertion",
						 __FILE__, __LINE__);
}


/*
 * GetErrorContextStack - Return the context stack, for display/diags
 *
 * Returns a pstrdup'd string in the caller's context which includes the PG
 * error call stack.  It is the caller's responsibility to ensure this string
 * is pfree'd (or its context cleaned up) when done.
 *
 * This information is collected by traversing the error contexts and calling
 * each context's callback function, each of which is expected to call
 * errcontext() to return a string which can be presented to the user.
 */
char *
GetErrorContextStack(void)
{
	ErrorData  *edata;
	ErrorContextCallback *econtext;

	/*
	 * Okay, crank up a stack entry to store the info in.
	 */
	recursion_depth++;

	if (++errordata_stack_depth >= ERRORDATA_STACK_SIZE)
	{
		/*
		 * Wups, stack not big enough.  We treat this as a PANIC condition
		 * because it suggests an infinite loop of errors during error
		 * recovery.
		 */
		errordata_stack_depth = -1;		/* make room on stack */
		ereport(PANIC, (errmsg_internal("ERRORDATA_STACK_SIZE exceeded")));
	}

	/*
	 * Things look good so far, so initialize our error frame
	 */
	edata = &errordata[errordata_stack_depth];
	MemSet(edata, 0, sizeof(ErrorData));

	/*
	 * Set up assoc_context to be the caller's context, so any allocations
	 * done (which will include edata->context) will use their context.
	 */
	edata->assoc_context = CurrentMemoryContext;

	/*
	 * Call any context callback functions to collect the context information
	 * into edata->context.
	 *
	 * Errors occurring in callback functions should go through the regular
	 * error handling code which should handle any recursive errors, though we
	 * double-check above, just in case.
	 */
	for (econtext = error_context_stack;
		 econtext != NULL;
		 econtext = econtext->previous)
		(*econtext->callback) (econtext->arg);

	/*
	 * Clean ourselves off the stack, any allocations done should have been
	 * using edata->assoc_context, which we set up earlier to be the caller's
	 * context, so we're free to just remove our entry off the stack and
	 * decrement recursion depth and exit.
	 */
	errordata_stack_depth--;
	recursion_depth--;

	/*
	 * Return a pointer to the string the caller asked for, which should have
	 * been allocated in their context.
	 */
	return edata->context;
}


/*
 * Initialization of error output file
 */
void
DebugFileOpen(void)
{
	int			fd,
				istty;

	if (OutputFileName[0])
	{
		/*
		 * A debug-output file name was given.
		 *
		 * Make sure we can write the file, and find out if it's a tty.
		 */
		if ((fd = open(OutputFileName, O_CREAT | O_APPEND | O_WRONLY,
					   0666)) < 0)
			ereport(FATAL,
					(errcode_for_file_access(),
				  errmsg("could not open file \"%s\": %m", OutputFileName)));
		istty = isatty(fd);
		close(fd);

		/*
		 * Redirect our stderr to the debug output file.
		 */
		if (!freopen(OutputFileName, "a", stderr))
			ereport(FATAL,
					(errcode_for_file_access(),
					 errmsg("could not reopen file \"%s\" as stderr: %m",
							OutputFileName)));

		/*
		 * If the file is a tty and we're running under the postmaster, try to
		 * send stdout there as well (if it isn't a tty then stderr will block
		 * out stdout, so we may as well let stdout go wherever it was going
		 * before).
		 */
		if (istty && IsUnderPostmaster)
			if (!freopen(OutputFileName, "a", stdout))
				ereport(FATAL,
						(errcode_for_file_access(),
						 errmsg("could not reopen file \"%s\" as stdout: %m",
								OutputFileName)));
	}
}


#ifdef HAVE_SYSLOG

/*
 * Set or update the parameters for syslog logging
 */
void
set_syslog_parameters(const char *ident, int facility)
{
	/*
	 * guc.c is likely to call us repeatedly with same parameters, so don't
	 * thrash the syslog connection unnecessarily.  Also, we do not re-open
	 * the connection until needed, since this routine will get called whether
	 * or not Log_destination actually mentions syslog.
	 *
	 * Note that we make our own copy of the ident string rather than relying
	 * on guc.c's.  This may be overly paranoid, but it ensures that we cannot
	 * accidentally free a string that syslog is still using.
	 */
	if (syslog_ident == NULL || strcmp(syslog_ident, ident) != 0 ||
		syslog_facility != facility)
	{
		if (openlog_done)
		{
			closelog();
			openlog_done = false;
		}
		if (syslog_ident)
			free(syslog_ident);
		syslog_ident = strdup(ident);
		/* if the strdup fails, we will cope in write_syslog() */
		syslog_facility = facility;
	}
}


/*
 * Write a message line to syslog
 */
static void
write_syslog(int level, const char *line)
{
	static unsigned long seq = 0;

	int			len;
	const char *nlpos;

	/* Open syslog connection if not done yet */
	if (!openlog_done)
	{
		openlog(syslog_ident ? syslog_ident : "postgres",
				LOG_PID | LOG_NDELAY | LOG_NOWAIT,
				syslog_facility);
		openlog_done = true;
	}

	/*
	 * We add a sequence number to each log message to suppress "same"
	 * messages.
	 */
	seq++;

	/*
	 * Our problem here is that many syslog implementations don't handle long
	 * messages in an acceptable manner. While this function doesn't help that
	 * fact, it does work around by splitting up messages into smaller pieces.
	 *
	 * We divide into multiple syslog() calls if message is too long or if the
	 * message contains embedded newline(s).
	 */
	len = strlen(line);
	nlpos = strchr(line, '\n');
	if (len > PG_SYSLOG_LIMIT || nlpos != NULL)
	{
		int			chunk_nr = 0;

		while (len > 0)
		{
			char		buf[PG_SYSLOG_LIMIT + 1];
			int			buflen;
			int			i;

			/* if we start at a newline, move ahead one char */
			if (line[0] == '\n')
			{
				line++;
				len--;
				/* we need to recompute the next newline's position, too */
				nlpos = strchr(line, '\n');
				continue;
			}

			/* copy one line, or as much as will fit, to buf */
			if (nlpos != NULL)
				buflen = nlpos - line;
			else
				buflen = len;
			buflen = Min(buflen, PG_SYSLOG_LIMIT);
			memcpy(buf, line, buflen);
			buf[buflen] = '\0';

			/* trim to multibyte letter boundary */
			buflen = pg_mbcliplen(buf, buflen, buflen);
			if (buflen <= 0)
				return;
			buf[buflen] = '\0';

			/* already word boundary? */
			if (line[buflen] != '\0' &&
				!isspace((unsigned char) line[buflen]))
			{
				/* try to divide at word boundary */
				i = buflen - 1;
				while (i > 0 && !isspace((unsigned char) buf[i]))
					i--;

				if (i > 0)		/* else couldn't divide word boundary */
				{
					buflen = i;
					buf[i] = '\0';
				}
			}

			chunk_nr++;

			syslog(level, "[%lu-%d] %s", seq, chunk_nr, buf);
			line += buflen;
			len -= buflen;
		}
	}
	else
	{
		/* message short enough */
		syslog(level, "[%lu] %s", seq, line);
	}
}
#endif   /* HAVE_SYSLOG */

#ifdef WIN32
/*
 * Get the PostgreSQL equivalent of the Windows ANSI code page.  "ANSI" system
 * interfaces (e.g. CreateFileA()) expect string arguments in this encoding.
 * Every process in a given system will find the same value at all times.
 */
static int
GetACPEncoding(void)
{
	static int	encoding = -2;

	if (encoding == -2)
		encoding = pg_codepage_to_encoding(GetACP());

	return encoding;
}

/*
 * Write a message line to the windows event log
 */
static void
write_eventlog(int level, const char *line, int len)
{
	WCHAR	   *utf16;
	int			eventlevel = EVENTLOG_ERROR_TYPE;
	static HANDLE evtHandle = INVALID_HANDLE_VALUE;

	if (evtHandle == INVALID_HANDLE_VALUE)
	{
		evtHandle = RegisterEventSource(NULL,
						 event_source ? event_source : DEFAULT_EVENT_SOURCE);
		if (evtHandle == NULL)
		{
			evtHandle = INVALID_HANDLE_VALUE;
			return;
		}
	}

	switch (level)
	{
		case DEBUG5:
		case DEBUG4:
		case DEBUG3:
		case DEBUG2:
		case DEBUG1:
		case LOG:
		case COMMERROR:
		case INFO:
		case NOTICE:
			eventlevel = EVENTLOG_INFORMATION_TYPE;
			break;
		case WARNING:
			eventlevel = EVENTLOG_WARNING_TYPE;
			break;
		case ERROR:
		case FATAL:
		case PANIC:
		default:
			eventlevel = EVENTLOG_ERROR_TYPE;
			break;
	}

	/*
	 * If message character encoding matches the encoding expected by
	 * ReportEventA(), call it to avoid the hazards of conversion.  Otherwise,
	 * try to convert the message to UTF16 and write it with ReportEventW().
	 * Fall back on ReportEventA() if conversion failed.
	 *
	 * Also verify that we are not on our way into error recursion trouble due
	 * to error messages thrown deep inside pgwin32_message_to_UTF16().
	 */
	if (!in_error_recursion_trouble() &&
		GetMessageEncoding() != GetACPEncoding())
	{
		utf16 = pgwin32_message_to_UTF16(line, len, NULL);
		if (utf16)
		{
			ReportEventW(evtHandle,
						 eventlevel,
						 0,
						 0,		/* All events are Id 0 */
						 NULL,
						 1,
						 0,
						 (LPCWSTR *) &utf16,
						 NULL);
			/* XXX Try ReportEventA() when ReportEventW() fails? */

			pfree(utf16);
			return;
		}
	}
	ReportEventA(evtHandle,
				 eventlevel,
				 0,
				 0,				/* All events are Id 0 */
				 NULL,
				 1,
				 0,
				 &line,
				 NULL);
}
#endif   /* WIN32 */

static void
write_console(const char *line, int len)
{
	int			rc;

#ifdef WIN32

	/*
	 * Try to convert the message to UTF16 and write it with WriteConsoleW().
	 * Fall back on write() if anything fails.
	 *
	 * In contrast to write_eventlog(), don't skip straight to write() based
	 * on the applicable encodings.  Unlike WriteConsoleW(), write() depends
	 * on the suitability of the console output code page.  Since we put
	 * stderr into binary mode in SubPostmasterMain(), write() skips the
	 * necessary translation anyway.
	 *
	 * WriteConsoleW() will fail if stderr is redirected, so just fall through
	 * to writing unconverted to the logfile in this case.
	 *
	 * Since we palloc the structure required for conversion, also fall
	 * through to writing unconverted if we have not yet set up
	 * CurrentMemoryContext.
	 */
	if (!in_error_recursion_trouble() &&
		!redirection_done &&
		CurrentMemoryContext != NULL)
	{
		WCHAR	   *utf16;
		int			utf16len;

		utf16 = pgwin32_message_to_UTF16(line, len, &utf16len);
		if (utf16 != NULL)
		{
			HANDLE		stdHandle;
			DWORD		written;

			stdHandle = GetStdHandle(STD_ERROR_HANDLE);
			if (WriteConsoleW(stdHandle, utf16, utf16len, &written, NULL))
			{
				pfree(utf16);
				return;
			}

			/*
			 * In case WriteConsoleW() failed, fall back to writing the
			 * message unconverted.
			 */
			pfree(utf16);
		}
	}
#else

	/*
	 * Conversion on non-win32 platforms is not implemented yet. It requires
	 * non-throw version of pg_do_encoding_conversion(), that converts
	 * unconvertable characters to '?' without errors.
	 */
#endif

	/*
	 * We ignore any error from write() here.  We have no useful way to report
	 * it ... certainly whining on stderr isn't likely to be productive.
	 */
	rc = write(fileno(stderr), line, len);
	(void) rc;
}

/*
 * setup formatted_log_time, for consistent times between CSV and regular logs
 */
static void
setup_formatted_log_time(void)
{
	struct timeval tv;
	pg_time_t	stamp_time;
	char		msbuf[8];

	gettimeofday(&tv, NULL);
	stamp_time = (pg_time_t) tv.tv_sec;

	/*
	 * Note: we expect that guc.c will ensure that log_timezone is set up (at
	 * least with a minimal GMT value) before Log_line_prefix can become
	 * nonempty or CSV mode can be selected.
	 */
	pg_strftime(formatted_log_time, FORMATTED_TS_LEN,
	/* leave room for milliseconds... */
				"%Y-%m-%d %H:%M:%S     %Z",
				pg_localtime(&stamp_time, log_timezone));

	/* 'paste' milliseconds into place... */
	sprintf(msbuf, ".%03d", (int) (tv.tv_usec / 1000));
	strncpy(formatted_log_time + 19, msbuf, 4);
}

/*
 * setup formatted_start_time
 */
static void
setup_formatted_start_time(void)
{
	pg_time_t	stamp_time = (pg_time_t) MyStartTime;

	/*
	 * Note: we expect that guc.c will ensure that log_timezone is set up (at
	 * least with a minimal GMT value) before Log_line_prefix can become
	 * nonempty or CSV mode can be selected.
	 */
	pg_strftime(formatted_start_time, FORMATTED_TS_LEN,
				"%Y-%m-%d %H:%M:%S %Z",
				pg_localtime(&stamp_time, log_timezone));
}

/*
 * process_log_prefix_padding --- helper function for processing the format
 * string in log_line_prefix
 *
 * Note: This function returns NULL if it finds something which
 * it deems invalid in the format string.
 */
static const char *
process_log_prefix_padding(const char *p, int *ppadding)
{
	int			paddingsign = 1;
	int			padding = 0;

	if (*p == '-')
	{
		p++;

		if (*p == '\0')			/* Did the buf end in %- ? */
			return NULL;
		paddingsign = -1;
	}

	/* generate an int version of the numerical string */
	while (*p >= '0' && *p <= '9')
		padding = padding * 10 + (*p++ - '0');

	/* format is invalid if it ends with the padding number */
	if (*p == '\0')
		return NULL;

	padding *= paddingsign;
	*ppadding = padding;
	return p;
}

/*
 * Format tag info for log lines; append to the provided buffer.
 */
static void
log_line_prefix(StringInfo buf, ErrorData *edata)
{
	/* static counter for line numbers */
	static long log_line_number = 0;

	/* has counter been reset in current process? */
	static int	log_my_pid = 0;
	int			padding;
	const char *p;

	/*
	 * This is one of the few places where we'd rather not inherit a static
	 * variable's value from the postmaster.  But since we will, reset it when
	 * MyProcPid changes. MyStartTime also changes when MyProcPid does, so
	 * reset the formatted start timestamp too.
	 */
	if (log_my_pid != MyProcPid)
	{
		log_line_number = 0;
		log_my_pid = MyProcPid;
		formatted_start_time[0] = '\0';
	}
	log_line_number++;

	if (Log_line_prefix == NULL)
		return;					/* in case guc hasn't run yet */

	for (p = Log_line_prefix; *p != '\0'; p++)
	{
		if (*p != '%')
		{
			/* literal char, just copy */
			appendStringInfoChar(buf, *p);
			continue;
		}

		/* must be a '%', so skip to the next char */
		p++;
		if (*p == '\0')
			break;				/* format error - ignore it */
		else if (*p == '%')
		{
			/* string contains %% */
			appendStringInfoChar(buf, '%');
			continue;
		}


		/*
		 * Process any formatting which may exist after the '%'.  Note that
		 * process_log_prefix_padding moves p past the padding number if it
		 * exists.
		 *
		 * Note: Since only '-', '0' to '9' are valid formatting characters we
		 * can do a quick check here to pre-check for formatting. If the char
		 * is not formatting then we can skip a useless function call.
		 *
		 * Further note: At least on some platforms, passing %*s rather than
		 * %s to appendStringInfo() is substantially slower, so many of the
		 * cases below avoid doing that unless non-zero padding is in fact
		 * specified.
		 */
		if (*p > '9')
			padding = 0;
		else if ((p = process_log_prefix_padding(p, &padding)) == NULL)
			break;

		/* process the option */
		switch (*p)
		{
			case 'a':
				if (MyProcPort)
				{
					const char *appname = application_name;

					if (appname == NULL || *appname == '\0')
						appname = _("[unknown]");
					if (padding != 0)
						appendStringInfo(buf, "%*s", padding, appname);
					else
						appendStringInfoString(buf, appname);
				}
				else if (padding != 0)
					appendStringInfoSpaces(buf,
										   padding > 0 ? padding : -padding);

				break;
			case 'u':
				if (MyProcPort)
				{
					const char *username = MyProcPort->user_name;

					if (username == NULL || *username == '\0')
						username = _("[unknown]");
					if (padding != 0)
						appendStringInfo(buf, "%*s", padding, username);
					else
						appendStringInfoString(buf, username);
				}
				else if (padding != 0)
					appendStringInfoSpaces(buf,
										   padding > 0 ? padding : -padding);
				break;
			case 'd':
				if (MyProcPort)
				{
					const char *dbname = MyProcPort->database_name;

					if (dbname == NULL || *dbname == '\0')
						dbname = _("[unknown]");
					if (padding != 0)
						appendStringInfo(buf, "%*s", padding, dbname);
					else
						appendStringInfoString(buf, dbname);
				}
				else if (padding != 0)
					appendStringInfoSpaces(buf,
										   padding > 0 ? padding : -padding);
				break;
			case 'c':
				if (padding != 0)
				{
					char		strfbuf[128];

					snprintf(strfbuf, sizeof(strfbuf) - 1, "%lx.%x",
							 (long) (MyStartTime), MyProcPid);
					appendStringInfo(buf, "%*s", padding, strfbuf);
				}
				else
					appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid);
				break;
			case 'p':
				if (padding != 0)
					appendStringInfo(buf, "%*d", padding, MyProcPid);
				else
					appendStringInfo(buf, "%d", MyProcPid);
				break;
			case 'l':
				if (padding != 0)
					appendStringInfo(buf, "%*ld", padding, log_line_number);
				else
					appendStringInfo(buf, "%ld", log_line_number);
				break;
			case 'm':
				setup_formatted_log_time();
				if (padding != 0)
					appendStringInfo(buf, "%*s", padding, formatted_log_time);
				else
					appendStringInfoString(buf, formatted_log_time);
				break;
			case 't':
				{
					pg_time_t	stamp_time = (pg_time_t) time(NULL);
					char		strfbuf[128];

					pg_strftime(strfbuf, sizeof(strfbuf),
								"%Y-%m-%d %H:%M:%S %Z",
								pg_localtime(&stamp_time, log_timezone));
					if (padding != 0)
						appendStringInfo(buf, "%*s", padding, strfbuf);
					else
						appendStringInfoString(buf, strfbuf);
				}
				break;
			case 's':
				if (formatted_start_time[0] == '\0')
					setup_formatted_start_time();
				if (padding != 0)
					appendStringInfo(buf, "%*s", padding, formatted_start_time);
				else
					appendStringInfoString(buf, formatted_start_time);
				break;
			case 'i':
				if (MyProcPort)
				{
					const char *psdisp;
					int			displen;

					psdisp = get_ps_display(&displen);
					if (padding != 0)
						appendStringInfo(buf, "%*s", padding, psdisp);
					else
						appendBinaryStringInfo(buf, psdisp, displen);

				}
				else if (padding != 0)
					appendStringInfoSpaces(buf,
										   padding > 0 ? padding : -padding);
				break;
			case 'r':
				if (MyProcPort && MyProcPort->remote_host)
				{
					if (padding != 0)
					{
						if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0')
						{
							/*
							 * This option is slightly special as the port
							 * number may be appended onto the end. Here we
							 * need to build 1 string which contains the
							 * remote_host and optionally the remote_port (if
							 * set) so we can properly align the string.
							 */

							char	   *hostport;

							hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port);
							appendStringInfo(buf, "%*s", padding, hostport);
							pfree(hostport);
						}
						else
							appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host);
					}
					else
					{
						/* padding is 0, so we don't need a temp buffer */
						appendStringInfoString(buf, MyProcPort->remote_host);
						if (MyProcPort->remote_port &&
							MyProcPort->remote_port[0] != '\0')
							appendStringInfo(buf, "(%s)",
											 MyProcPort->remote_port);
					}

				}
				else if (padding != 0)
					appendStringInfoSpaces(buf,
										   padding > 0 ? padding : -padding);
				break;
			case 'h':
				if (MyProcPort && MyProcPort->remote_host)
				{
					if (padding != 0)
						appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host);
					else
						appendStringInfoString(buf, MyProcPort->remote_host);
				}
				else if (padding != 0)
					appendStringInfoSpaces(buf,
										   padding > 0 ? padding : -padding);
				break;
			case 'q':
				/* in postmaster and friends, stop if %q is seen */
				/* in a backend, just ignore */
				if (MyProcPort == NULL)
					return;
				break;
			case 'v':
				/* keep VXID format in sync with lockfuncs.c */
				if (MyProc != NULL && MyProc->backendId != InvalidBackendId)
				{
					if (padding != 0)
					{
						char		strfbuf[128];

						snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u",
								 MyProc->backendId, MyProc->lxid);
						appendStringInfo(buf, "%*s", padding, strfbuf);
					}
					else
						appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid);
				}
				else if (padding != 0)
					appendStringInfoSpaces(buf,
										   padding > 0 ? padding : -padding);
				break;
			case 'x':
				if (padding != 0)
					appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny());
				else
					appendStringInfo(buf, "%u", GetTopTransactionIdIfAny());
				break;
			case 'e':
				if (padding != 0)
					appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode));
				else
					appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode));
				break;
			default:
				/* format error - ignore it */
				break;
		}
	}
}

/*
 * append a CSV'd version of a string to a StringInfo
 * We use the PostgreSQL defaults for CSV, i.e. quote = escape = '"'
 * If it's NULL, append nothing.
 */
static inline void
appendCSVLiteral(StringInfo buf, const char *data)
{
	const char *p = data;
	char		c;

	/* avoid confusing an empty string with NULL */
	if (p == NULL)
		return;

	appendStringInfoCharMacro(buf, '"');
	while ((c = *p++) != '\0')
	{
		if (c == '"')
			appendStringInfoCharMacro(buf, '"');
		appendStringInfoCharMacro(buf, c);
	}
	appendStringInfoCharMacro(buf, '"');
}

/*
 * Constructs the error message, depending on the Errordata it gets, in a CSV
 * format which is described in doc/src/sgml/config.sgml.
 */
static void
write_csvlog(ErrorData *edata)
{
	StringInfoData buf;
	bool		print_stmt = false;

	/* static counter for line numbers */
	static long log_line_number = 0;

	/* has counter been reset in current process? */
	static int	log_my_pid = 0;

	/*
	 * This is one of the few places where we'd rather not inherit a static
	 * variable's value from the postmaster.  But since we will, reset it when
	 * MyProcPid changes.
	 */
	if (log_my_pid != MyProcPid)
	{
		log_line_number = 0;
		log_my_pid = MyProcPid;
		formatted_start_time[0] = '\0';
	}
	log_line_number++;

	initStringInfo(&buf);

	/*
	 * timestamp with milliseconds
	 *
	 * Check if the timestamp is already calculated for the syslog message,
	 * and use it if so.  Otherwise, get the current timestamp.  This is done
	 * to put same timestamp in both syslog and csvlog messages.
	 */
	if (formatted_log_time[0] == '\0')
		setup_formatted_log_time();

	appendStringInfoString(&buf, formatted_log_time);
	appendStringInfoChar(&buf, ',');

	/* username */
	if (MyProcPort)
		appendCSVLiteral(&buf, MyProcPort->user_name);
	appendStringInfoChar(&buf, ',');

	/* database name */
	if (MyProcPort)
		appendCSVLiteral(&buf, MyProcPort->database_name);
	appendStringInfoChar(&buf, ',');

	/* Process id  */
	if (MyProcPid != 0)
		appendStringInfo(&buf, "%d", MyProcPid);
	appendStringInfoChar(&buf, ',');

	/* Remote host and port */
	if (MyProcPort && MyProcPort->remote_host)
	{
		appendStringInfoChar(&buf, '"');
		appendStringInfoString(&buf, MyProcPort->remote_host);
		if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0')
		{
			appendStringInfoChar(&buf, ':');
			appendStringInfoString(&buf, MyProcPort->remote_port);
		}
		appendStringInfoChar(&buf, '"');
	}
	appendStringInfoChar(&buf, ',');

	/* session id */
	appendStringInfo(&buf, "%lx.%x", (long) MyStartTime, MyProcPid);
	appendStringInfoChar(&buf, ',');

	/* Line number */
	appendStringInfo(&buf, "%ld", log_line_number);
	appendStringInfoChar(&buf, ',');

	/* PS display */
	if (MyProcPort)
	{
		StringInfoData msgbuf;
		const char *psdisp;
		int			displen;

		initStringInfo(&msgbuf);

		psdisp = get_ps_display(&displen);
		appendBinaryStringInfo(&msgbuf, psdisp, displen);
		appendCSVLiteral(&buf, msgbuf.data);

		pfree(msgbuf.data);
	}
	appendStringInfoChar(&buf, ',');

	/* session start timestamp */
	if (formatted_start_time[0] == '\0')
		setup_formatted_start_time();
	appendStringInfoString(&buf, formatted_start_time);
	appendStringInfoChar(&buf, ',');

	/* Virtual transaction id */
	/* keep VXID format in sync with lockfuncs.c */
	if (MyProc != NULL && MyProc->backendId != InvalidBackendId)
		appendStringInfo(&buf, "%d/%u", MyProc->backendId, MyProc->lxid);
	appendStringInfoChar(&buf, ',');

	/* Transaction id */
	appendStringInfo(&buf, "%u", GetTopTransactionIdIfAny());
	appendStringInfoChar(&buf, ',');

	/* Error severity */
	appendStringInfoString(&buf, error_severity(edata->elevel));
	appendStringInfoChar(&buf, ',');

	/* SQL state code */
	appendStringInfoString(&buf, unpack_sql_state(edata->sqlerrcode));
	appendStringInfoChar(&buf, ',');

	/* errmessage */
	appendCSVLiteral(&buf, edata->message);
	appendStringInfoChar(&buf, ',');

	/* errdetail or errdetail_log */
	if (edata->detail_log)
		appendCSVLiteral(&buf, edata->detail_log);
	else
		appendCSVLiteral(&buf, edata->detail);
	appendStringInfoChar(&buf, ',');

	/* errhint */
	appendCSVLiteral(&buf, edata->hint);
	appendStringInfoChar(&buf, ',');

	/* internal query */
	appendCSVLiteral(&buf, edata->internalquery);
	appendStringInfoChar(&buf, ',');

	/* if printed internal query, print internal pos too */
	if (edata->internalpos > 0 && edata->internalquery != NULL)
		appendStringInfo(&buf, "%d", edata->internalpos);
	appendStringInfoChar(&buf, ',');

	/* errcontext */
	if (!edata->hide_ctx)
		appendCSVLiteral(&buf, edata->context);
	appendStringInfoChar(&buf, ',');

	/* user query --- only reported if not disabled by the caller */
	if (is_log_level_output(edata->elevel, log_min_error_statement) &&
		debug_query_string != NULL &&
		!edata->hide_stmt)
		print_stmt = true;
	if (print_stmt)
		appendCSVLiteral(&buf, debug_query_string);
	appendStringInfoChar(&buf, ',');
	if (print_stmt && edata->cursorpos > 0)
		appendStringInfo(&buf, "%d", edata->cursorpos);
	appendStringInfoChar(&buf, ',');

	/* file error location */
	if (Log_error_verbosity >= PGERROR_VERBOSE)
	{
		StringInfoData msgbuf;

		initStringInfo(&msgbuf);

		if (edata->funcname && edata->filename)
			appendStringInfo(&msgbuf, "%s, %s:%d",
							 edata->funcname, edata->filename,
							 edata->lineno);
		else if (edata->filename)
			appendStringInfo(&msgbuf, "%s:%d",
							 edata->filename, edata->lineno);
		appendCSVLiteral(&buf, msgbuf.data);
		pfree(msgbuf.data);
	}
	appendStringInfoChar(&buf, ',');

	/* application name */
	if (application_name)
		appendCSVLiteral(&buf, application_name);

	appendStringInfoChar(&buf, '\n');

	/* If in the syslogger process, try to write messages direct to file */
	if (am_syslogger)
		write_syslogger_file(buf.data, buf.len, LOG_DESTINATION_CSVLOG);
	else
		write_pipe_chunks(buf.data, buf.len, LOG_DESTINATION_CSVLOG);

	pfree(buf.data);
}

/*
 * Unpack MAKE_SQLSTATE code. Note that this returns a pointer to a
 * static buffer.
 */
char *
unpack_sql_state(int sql_state)
{
	static char buf[12];
	int			i;

	for (i = 0; i < 5; i++)
	{
		buf[i] = PGUNSIXBIT(sql_state);
		sql_state >>= 6;
	}

	buf[i] = '\0';
	return buf;
}


/*
 * Write error report to server's log
 */
static void
send_message_to_server_log(ErrorData *edata)
{
	StringInfoData buf;

	initStringInfo(&buf);

	formatted_log_time[0] = '\0';

	log_line_prefix(&buf, edata);
	appendStringInfo(&buf, "%s:  ", error_severity(edata->elevel));

	if (Log_error_verbosity >= PGERROR_VERBOSE)
		appendStringInfo(&buf, "%s: ", unpack_sql_state(edata->sqlerrcode));

	if (edata->message)
		append_with_tabs(&buf, edata->message);
	else
		append_with_tabs(&buf, _("missing error text"));

	if (edata->cursorpos > 0)
		appendStringInfo(&buf, _(" at character %d"),
						 edata->cursorpos);
	else if (edata->internalpos > 0)
		appendStringInfo(&buf, _(" at character %d"),
						 edata->internalpos);

	appendStringInfoChar(&buf, '\n');

	if (Log_error_verbosity >= PGERROR_DEFAULT)
	{
		if (edata->detail_log)
		{
			log_line_prefix(&buf, edata);
			appendStringInfoString(&buf, _("DETAIL:  "));
			append_with_tabs(&buf, edata->detail_log);
			appendStringInfoChar(&buf, '\n');
		}
		else if (edata->detail)
		{
			log_line_prefix(&buf, edata);
			appendStringInfoString(&buf, _("DETAIL:  "));
			append_with_tabs(&buf, edata->detail);
			appendStringInfoChar(&buf, '\n');
		}
		if (edata->hint)
		{
			log_line_prefix(&buf, edata);
			appendStringInfoString(&buf, _("HINT:  "));
			append_with_tabs(&buf, edata->hint);
			appendStringInfoChar(&buf, '\n');
		}
		if (edata->internalquery)
		{
			log_line_prefix(&buf, edata);
			appendStringInfoString(&buf, _("QUERY:  "));
			append_with_tabs(&buf, edata->internalquery);
			appendStringInfoChar(&buf, '\n');
		}
		if (edata->context && !edata->hide_ctx)
		{
			log_line_prefix(&buf, edata);
			appendStringInfoString(&buf, _("CONTEXT:  "));
			append_with_tabs(&buf, edata->context);
			appendStringInfoChar(&buf, '\n');
		}
		if (Log_error_verbosity >= PGERROR_VERBOSE)
		{
			/* assume no newlines in funcname or filename... */
			if (edata->funcname && edata->filename)
			{
				log_line_prefix(&buf, edata);
				appendStringInfo(&buf, _("LOCATION:  %s, %s:%d\n"),
								 edata->funcname, edata->filename,
								 edata->lineno);
			}
			else if (edata->filename)
			{
				log_line_prefix(&buf, edata);
				appendStringInfo(&buf, _("LOCATION:  %s:%d\n"),
								 edata->filename, edata->lineno);
			}
		}
	}

	/*
	 * If the user wants the query that generated this error logged, do it.
	 */
	if (is_log_level_output(edata->elevel, log_min_error_statement) &&
		debug_query_string != NULL &&
		!edata->hide_stmt)
	{
		log_line_prefix(&buf, edata);
		appendStringInfoString(&buf, _("STATEMENT:  "));
		append_with_tabs(&buf, debug_query_string);
		appendStringInfoChar(&buf, '\n');
	}

#ifdef HAVE_SYSLOG
	/* Write to syslog, if enabled */
	if (Log_destination & LOG_DESTINATION_SYSLOG)
	{
		int			syslog_level;

		switch (edata->elevel)
		{
			case DEBUG5:
			case DEBUG4:
			case DEBUG3:
			case DEBUG2:
			case DEBUG1:
				syslog_level = LOG_DEBUG;
				break;
			case LOG:
			case COMMERROR:
			case INFO:
				syslog_level = LOG_INFO;
				break;
			case NOTICE:
			case WARNING:
				syslog_level = LOG_NOTICE;
				break;
			case ERROR:
				syslog_level = LOG_WARNING;
				break;
			case FATAL:
				syslog_level = LOG_ERR;
				break;
			case PANIC:
			default:
				syslog_level = LOG_CRIT;
				break;
		}

		write_syslog(syslog_level, buf.data);
	}
#endif   /* HAVE_SYSLOG */

#ifdef WIN32
	/* Write to eventlog, if enabled */
	if (Log_destination & LOG_DESTINATION_EVENTLOG)
	{
		write_eventlog(edata->elevel, buf.data, buf.len);
	}
#endif   /* WIN32 */

	/* Write to stderr, if enabled */
	if ((Log_destination & LOG_DESTINATION_STDERR) || whereToSendOutput == DestDebug)
	{
		/*
		 * Use the chunking protocol if we know the syslogger should be
		 * catching stderr output, and we are not ourselves the syslogger.
		 * Otherwise, just do a vanilla write to stderr.
		 */
		if (redirection_done && !am_syslogger)
			write_pipe_chunks(buf.data, buf.len, LOG_DESTINATION_STDERR);
#ifdef WIN32

		/*
		 * In a win32 service environment, there is no usable stderr. Capture
		 * anything going there and write it to the eventlog instead.
		 *
		 * If stderr redirection is active, it was OK to write to stderr above
		 * because that's really a pipe to the syslogger process.
		 */
		else if (pgwin32_is_service())
			write_eventlog(edata->elevel, buf.data, buf.len);
#endif
		else
			write_console(buf.data, buf.len);
	}

	/* If in the syslogger process, try to write messages direct to file */
	if (am_syslogger)
		write_syslogger_file(buf.data, buf.len, LOG_DESTINATION_STDERR);

	/* Write to CSV log if enabled */
	if (Log_destination & LOG_DESTINATION_CSVLOG)
	{
		if (redirection_done || am_syslogger)
		{
			/*
			 * send CSV data if it's safe to do so (syslogger doesn't need the
			 * pipe). First get back the space in the message buffer.
			 */
			pfree(buf.data);
			write_csvlog(edata);
		}
		else
		{
			/*
			 * syslogger not up (yet), so just dump the message to stderr,
			 * unless we already did so above.
			 */
			if (!(Log_destination & LOG_DESTINATION_STDERR) &&
				whereToSendOutput != DestDebug)
				write_console(buf.data, buf.len);
			pfree(buf.data);
		}
	}
	else
	{
		pfree(buf.data);
	}
}

/*
 * Send data to the syslogger using the chunked protocol
 *
 * Note: when there are multiple backends writing into the syslogger pipe,
 * it's critical that each write go into the pipe indivisibly, and not
 * get interleaved with data from other processes.  Fortunately, the POSIX
 * spec requires that writes to pipes be atomic so long as they are not
 * more than PIPE_BUF bytes long.  So we divide long messages into chunks
 * that are no more than that length, and send one chunk per write() call.
 * The collector process knows how to reassemble the chunks.
 *
 * Because of the atomic write requirement, there are only two possible
 * results from write() here: -1 for failure, or the requested number of
 * bytes.  There is not really anything we can do about a failure; retry would
 * probably be an infinite loop, and we can't even report the error usefully.
 * (There is noplace else we could send it!)  So we might as well just ignore
 * the result from write().  However, on some platforms you get a compiler
 * warning from ignoring write()'s result, so do a little dance with casting
 * rc to void to shut up the compiler.
 */
static void
write_pipe_chunks(char *data, int len, int dest)
{
	PipeProtoChunk p;
	int			fd = fileno(stderr);
	int			rc;

	Assert(len > 0);

	p.proto.nuls[0] = p.proto.nuls[1] = '\0';
	p.proto.pid = MyProcPid;

	/* write all but the last chunk */
	while (len > PIPE_MAX_PAYLOAD)
	{
		p.proto.is_last = (dest == LOG_DESTINATION_CSVLOG ? 'F' : 'f');
		p.proto.len = PIPE_MAX_PAYLOAD;
		memcpy(p.proto.data, data, PIPE_MAX_PAYLOAD);
		rc = write(fd, &p, PIPE_HEADER_SIZE + PIPE_MAX_PAYLOAD);
		(void) rc;
		data += PIPE_MAX_PAYLOAD;
		len -= PIPE_MAX_PAYLOAD;
	}

	/* write the last chunk */
	p.proto.is_last = (dest == LOG_DESTINATION_CSVLOG ? 'T' : 't');
	p.proto.len = len;
	memcpy(p.proto.data, data, len);
	rc = write(fd, &p, PIPE_HEADER_SIZE + len);
	(void) rc;
}


/*
 * Append a text string to the error report being built for the client.
 *
 * This is ordinarily identical to pq_sendstring(), but if we are in
 * error recursion trouble we skip encoding conversion, because of the
 * possibility that the problem is a failure in the encoding conversion
 * subsystem itself.  Code elsewhere should ensure that the passed-in
 * strings will be plain 7-bit ASCII, and thus not in need of conversion,
 * in such cases.  (In particular, we disable localization of error messages
 * to help ensure that's true.)
 */
static void
err_sendstring(StringInfo buf, const char *str)
{
	if (in_error_recursion_trouble())
		pq_send_ascii_string(buf, str);
	else
		pq_sendstring(buf, str);
}

/*
 * Write error report to client
 */
static void
send_message_to_frontend(ErrorData *edata)
{
	StringInfoData msgbuf;

	/* 'N' (Notice) is for nonfatal conditions, 'E' is for errors */
	pq_beginmessage(&msgbuf, (edata->elevel < ERROR) ? 'N' : 'E');

	if (PG_PROTOCOL_MAJOR(FrontendProtocol) >= 3)
	{
		/* New style with separate fields */
		char		tbuf[12];
		int			ssval;
		int			i;

		pq_sendbyte(&msgbuf, PG_DIAG_SEVERITY);
		err_sendstring(&msgbuf, error_severity(edata->elevel));

		/* unpack MAKE_SQLSTATE code */
		ssval = edata->sqlerrcode;
		for (i = 0; i < 5; i++)
		{
			tbuf[i] = PGUNSIXBIT(ssval);
			ssval >>= 6;
		}
		tbuf[i] = '\0';

		pq_sendbyte(&msgbuf, PG_DIAG_SQLSTATE);
		err_sendstring(&msgbuf, tbuf);

		/* M field is required per protocol, so always send something */
		pq_sendbyte(&msgbuf, PG_DIAG_MESSAGE_PRIMARY);
		if (edata->message)
			err_sendstring(&msgbuf, edata->message);
		else
			err_sendstring(&msgbuf, _("missing error text"));

		if (edata->detail)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_MESSAGE_DETAIL);
			err_sendstring(&msgbuf, edata->detail);
		}

		/* detail_log is intentionally not used here */

		if (edata->hint)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_MESSAGE_HINT);
			err_sendstring(&msgbuf, edata->hint);
		}

		if (edata->context)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_CONTEXT);
			err_sendstring(&msgbuf, edata->context);
		}

		if (edata->schema_name)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_SCHEMA_NAME);
			err_sendstring(&msgbuf, edata->schema_name);
		}

		if (edata->table_name)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_TABLE_NAME);
			err_sendstring(&msgbuf, edata->table_name);
		}

		if (edata->column_name)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_COLUMN_NAME);
			err_sendstring(&msgbuf, edata->column_name);
		}

		if (edata->datatype_name)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_DATATYPE_NAME);
			err_sendstring(&msgbuf, edata->datatype_name);
		}

		if (edata->constraint_name)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_CONSTRAINT_NAME);
			err_sendstring(&msgbuf, edata->constraint_name);
		}

		if (edata->cursorpos > 0)
		{
			snprintf(tbuf, sizeof(tbuf), "%d", edata->cursorpos);
			pq_sendbyte(&msgbuf, PG_DIAG_STATEMENT_POSITION);
			err_sendstring(&msgbuf, tbuf);
		}

		if (edata->internalpos > 0)
		{
			snprintf(tbuf, sizeof(tbuf), "%d", edata->internalpos);
			pq_sendbyte(&msgbuf, PG_DIAG_INTERNAL_POSITION);
			err_sendstring(&msgbuf, tbuf);
		}

		if (edata->internalquery)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_INTERNAL_QUERY);
			err_sendstring(&msgbuf, edata->internalquery);
		}

		if (edata->filename)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_SOURCE_FILE);
			err_sendstring(&msgbuf, edata->filename);
		}

		if (edata->lineno > 0)
		{
			snprintf(tbuf, sizeof(tbuf), "%d", edata->lineno);
			pq_sendbyte(&msgbuf, PG_DIAG_SOURCE_LINE);
			err_sendstring(&msgbuf, tbuf);
		}

		if (edata->funcname)
		{
			pq_sendbyte(&msgbuf, PG_DIAG_SOURCE_FUNCTION);
			err_sendstring(&msgbuf, edata->funcname);
		}

		pq_sendbyte(&msgbuf, '\0');		/* terminator */
	}
	else
	{
		/* Old style --- gin up a backwards-compatible message */
		StringInfoData buf;

		initStringInfo(&buf);

		appendStringInfo(&buf, "%s:  ", error_severity(edata->elevel));

		if (edata->show_funcname && edata->funcname)
			appendStringInfo(&buf, "%s: ", edata->funcname);

		if (edata->message)
			appendStringInfoString(&buf, edata->message);
		else
			appendStringInfoString(&buf, _("missing error text"));

		if (edata->cursorpos > 0)
			appendStringInfo(&buf, _(" at character %d"),
							 edata->cursorpos);
		else if (edata->internalpos > 0)
			appendStringInfo(&buf, _(" at character %d"),
							 edata->internalpos);

		appendStringInfoChar(&buf, '\n');

		err_sendstring(&msgbuf, buf.data);

		pfree(buf.data);
	}

	pq_endmessage(&msgbuf);

	/*
	 * This flush is normally not necessary, since postgres.c will flush out
	 * waiting data when control returns to the main loop. But it seems best
	 * to leave it here, so that the client has some clue what happened if the
	 * backend dies before getting back to the main loop ... error/notice
	 * messages should not be a performance-critical path anyway, so an extra
	 * flush won't hurt much ...
	 */
	pq_flush();
}


/*
 * Support routines for formatting error messages.
 */


/*
 * expand_fmt_string --- process special format codes in a format string
 *
 * We must replace %m with the appropriate strerror string, since vsnprintf
 * won't know what to do with it.
 *
 * The result is a palloc'd string.
 */
static char *
expand_fmt_string(const char *fmt, ErrorData *edata)
{
	StringInfoData buf;
	const char *cp;

	initStringInfo(&buf);

	for (cp = fmt; *cp; cp++)
	{
		if (cp[0] == '%' && cp[1] != '\0')
		{
			cp++;
			if (*cp == 'm')
			{
				/*
				 * Replace %m by system error string.  If there are any %'s in
				 * the string, we'd better double them so that vsnprintf won't
				 * misinterpret.
				 */
				const char *cp2;

				cp2 = useful_strerror(edata->saved_errno);
				for (; *cp2; cp2++)
				{
					if (*cp2 == '%')
						appendStringInfoCharMacro(&buf, '%');
					appendStringInfoCharMacro(&buf, *cp2);
				}
			}
			else
			{
				/* copy % and next char --- this avoids trouble with %%m */
				appendStringInfoCharMacro(&buf, '%');
				appendStringInfoCharMacro(&buf, *cp);
			}
		}
		else
			appendStringInfoCharMacro(&buf, *cp);
	}

	return buf.data;
}


/*
 * A slightly cleaned-up version of strerror()
 */
static const char *
useful_strerror(int errnum)
{
	/* this buffer is only used if strerror() and get_errno_symbol() fail */
	static char errorstr_buf[48];
	const char *str;

#ifdef WIN32
	/* Winsock error code range, per WinError.h */
	if (errnum >= 10000 && errnum <= 11999)
		return pgwin32_socket_strerror(errnum);
#endif
	str = strerror(errnum);

	/*
	 * Some strerror()s return an empty string for out-of-range errno.  This
	 * is ANSI C spec compliant, but not exactly useful.  Also, we may get
	 * back strings of question marks if libc cannot transcode the message to
	 * the codeset specified by LC_CTYPE.  If we get nothing useful, first try
	 * get_errno_symbol(), and if that fails, print the numeric errno.
	 */
	if (str == NULL || *str == '\0' || *str == '?')
		str = get_errno_symbol(errnum);

	if (str == NULL)
	{
		snprintf(errorstr_buf, sizeof(errorstr_buf),
		/*------
		  translator: This string will be truncated at 47
		  characters expanded. */
				 _("operating system error %d"), errnum);
		str = errorstr_buf;
	}

	return str;
}

/*
 * Returns a symbol (e.g. "ENOENT") for an errno code.
 * Returns NULL if the code is unrecognized.
 */
static const char *
get_errno_symbol(int errnum)
{
	switch (errnum)
	{
		case E2BIG:
			return "E2BIG";
		case EACCES:
			return "EACCES";
#ifdef EADDRINUSE
		case EADDRINUSE:
			return "EADDRINUSE";
#endif
#ifdef EADDRNOTAVAIL
		case EADDRNOTAVAIL:
			return "EADDRNOTAVAIL";
#endif
		case EAFNOSUPPORT:
			return "EAFNOSUPPORT";
#ifdef EAGAIN
		case EAGAIN:
			return "EAGAIN";
#endif
#ifdef EALREADY
		case EALREADY:
			return "EALREADY";
#endif
		case EBADF:
			return "EBADF";
#ifdef EBADMSG
		case EBADMSG:
			return "EBADMSG";
#endif
		case EBUSY:
			return "EBUSY";
		case ECHILD:
			return "ECHILD";
#ifdef ECONNABORTED
		case ECONNABORTED:
			return "ECONNABORTED";
#endif
		case ECONNREFUSED:
			return "ECONNREFUSED";
#ifdef ECONNRESET
		case ECONNRESET:
			return "ECONNRESET";
#endif
		case EDEADLK:
			return "EDEADLK";
		case EDOM:
			return "EDOM";
		case EEXIST:
			return "EEXIST";
		case EFAULT:
			return "EFAULT";
		case EFBIG:
			return "EFBIG";
#ifdef EHOSTUNREACH
		case EHOSTUNREACH:
			return "EHOSTUNREACH";
#endif
		case EIDRM:
			return "EIDRM";
		case EINPROGRESS:
			return "EINPROGRESS";
		case EINTR:
			return "EINTR";
		case EINVAL:
			return "EINVAL";
		case EIO:
			return "EIO";
#ifdef EISCONN
		case EISCONN:
			return "EISCONN";
#endif
		case EISDIR:
			return "EISDIR";
#ifdef ELOOP
		case ELOOP:
			return "ELOOP";
#endif
		case EMFILE:
			return "EMFILE";
		case EMLINK:
			return "EMLINK";
		case EMSGSIZE:
			return "EMSGSIZE";
		case ENAMETOOLONG:
			return "ENAMETOOLONG";
		case ENFILE:
			return "ENFILE";
		case ENOBUFS:
			return "ENOBUFS";
		case ENODEV:
			return "ENODEV";
		case ENOENT:
			return "ENOENT";
		case ENOEXEC:
			return "ENOEXEC";
		case ENOMEM:
			return "ENOMEM";
		case ENOSPC:
			return "ENOSPC";
		case ENOSYS:
			return "ENOSYS";
#ifdef ENOTCONN
		case ENOTCONN:
			return "ENOTCONN";
#endif
		case ENOTDIR:
			return "ENOTDIR";
#if defined(ENOTEMPTY) && (ENOTEMPTY != EEXIST) /* same code on AIX */
		case ENOTEMPTY:
			return "ENOTEMPTY";
#endif
#ifdef ENOTSOCK
		case ENOTSOCK:
			return "ENOTSOCK";
#endif
#ifdef ENOTSUP
		case ENOTSUP:
			return "ENOTSUP";
#endif
		case ENOTTY:
			return "ENOTTY";
		case ENXIO:
			return "ENXIO";
#if defined(EOPNOTSUPP) && (!defined(ENOTSUP) || (EOPNOTSUPP != ENOTSUP))
		case EOPNOTSUPP:
			return "EOPNOTSUPP";
#endif
#ifdef EOVERFLOW
		case EOVERFLOW:
			return "EOVERFLOW";
#endif
		case EPERM:
			return "EPERM";
		case EPIPE:
			return "EPIPE";
		case EPROTONOSUPPORT:
			return "EPROTONOSUPPORT";
		case ERANGE:
			return "ERANGE";
#ifdef EROFS
		case EROFS:
			return "EROFS";
#endif
		case ESRCH:
			return "ESRCH";
#ifdef ETIMEDOUT
		case ETIMEDOUT:
			return "ETIMEDOUT";
#endif
#ifdef ETXTBSY
		case ETXTBSY:
			return "ETXTBSY";
#endif
#if defined(EWOULDBLOCK) && (!defined(EAGAIN) || (EWOULDBLOCK != EAGAIN))
		case EWOULDBLOCK:
			return "EWOULDBLOCK";
#endif
		case EXDEV:
			return "EXDEV";
	}

	return NULL;
}


/*
 * error_severity --- get localized string representing elevel
 */
static const char *
error_severity(int elevel)
{
	const char *prefix;

	switch (elevel)
	{
		case DEBUG1:
		case DEBUG2:
		case DEBUG3:
		case DEBUG4:
		case DEBUG5:
			prefix = _("DEBUG");
			break;
		case LOG:
		case COMMERROR:
			prefix = _("LOG");
			break;
		case INFO:
			prefix = _("INFO");
			break;
		case NOTICE:
			prefix = _("NOTICE");
			break;
		case WARNING:
			prefix = _("WARNING");
			break;
		case ERROR:
			prefix = _("ERROR");
			break;
		case FATAL:
			prefix = _("FATAL");
			break;
		case PANIC:
			prefix = _("PANIC");
			break;
		default:
			prefix = "???";
			break;
	}

	return prefix;
}


/*
 *	append_with_tabs
 *
 *	Append the string to the StringInfo buffer, inserting a tab after any
 *	newline.
 */
static void
append_with_tabs(StringInfo buf, const char *str)
{
	char		ch;

	while ((ch = *str++) != '\0')
	{
		appendStringInfoCharMacro(buf, ch);
		if (ch == '\n')
			appendStringInfoCharMacro(buf, '\t');
	}
}


/*
 * Write errors to stderr (or by equal means when stderr is
 * not available). Used before ereport/elog can be used
 * safely (memory context, GUC load etc)
 */
void
write_stderr(const char *fmt,...)
{
	va_list		ap;

#ifdef WIN32
	char		errbuf[2048];	/* Arbitrary size? */
#endif

	fmt = _(fmt);

	va_start(ap, fmt);
#ifndef WIN32
	/* On Unix, we just fprintf to stderr */
	vfprintf(stderr, fmt, ap);
	fflush(stderr);
#else
	vsnprintf(errbuf, sizeof(errbuf), fmt, ap);

	/*
	 * On Win32, we print to stderr if running on a console, or write to
	 * eventlog if running as a service
	 */
	if (pgwin32_is_service())	/* Running as a service */
	{
		write_eventlog(ERROR, errbuf, strlen(errbuf));
	}
	else
	{
		/* Not running as service, write to stderr */
		write_console(errbuf, strlen(errbuf));
		fflush(stderr);
	}
#endif
	va_end(ap);
}


/*
 * is_log_level_output -- is elevel logically >= log_min_level?
 *
 * We use this for tests that should consider LOG to sort out-of-order,
 * between ERROR and FATAL.  Generally this is the right thing for testing
 * whether a message should go to the postmaster log, whereas a simple >=
 * test is correct for testing whether the message should go to the client.
 */
static bool
is_log_level_output(int elevel, int log_min_level)
{
	if (elevel == LOG || elevel == COMMERROR)
	{
		if (log_min_level == LOG || log_min_level <= ERROR)
			return true;
	}
	else if (log_min_level == LOG)
	{
		/* elevel != LOG */
		if (elevel >= FATAL)
			return true;
	}
	/* Neither is LOG */
	else if (elevel >= log_min_level)
		return true;

	return false;
}

/*
 * Adjust the level of a recovery-related message per trace_recovery_messages.
 *
 * The argument is the default log level of the message, eg, DEBUG2.  (This
 * should only be applied to DEBUGn log messages, otherwise it's a no-op.)
 * If the level is >= trace_recovery_messages, we return LOG, causing the
 * message to be logged unconditionally (for most settings of
 * log_min_messages).  Otherwise, we return the argument unchanged.
 * The message will then be shown based on the setting of log_min_messages.
 *
 * Intention is to keep this for at least the whole of the 9.0 production
 * release, so we can more easily diagnose production problems in the field.
 * It should go away eventually, though, because it's an ugly and
 * hard-to-explain kluge.
 */
int
trace_recovery(int trace_level)
{
	if (trace_level < LOG &&
		trace_level >= trace_recovery_messages)
		return LOG;

	return trace_level;
}
