<Chapter>
<DocInfo>
<Author>
<FirstName>Phil</FirstName>
<Surname>Thompson</Surname>
</Author>
<Date>1998-05-04</Date>
</DocInfo>
<Title>Frontend/Backend Protocol</Title>

<Para>
<Note>
<Para>
Written by <ULink url="mailto:phil@river-bank.demon.co.uk">Phil Thompson</ULink>.
Updates for protocol 2.0 by <ULink url="mailto:tgl@sss.pgh.pa.us">Tom Lane</ULink>.
</Para>
</Note>

<Para>
<ProductName>Postgres</ProductName> uses a message-based protocol for communication between frontends
and backends.  The protocol is implemented over <Acronym>TCP/IP</Acronym> and also on Unix sockets.
<ProductName>Postgres</ProductName> v6.3 introduced version numbers into the protocol.
This was done in such
a way as to still allow connections from earlier versions of frontends, but
this document does not cover the protocol used by those earlier versions.

<Para>
This document describes version 2.0 of the protocol.
Higher level features built on this protocol (for example, how <FileName>libpq</FileName> passes
certain environment variables after the connection is established)
are covered elsewhere.

<Sect1>
<Title>Overview</Title>

<Para>
The three major components are the frontend (running on the client) and the
postmaster and backend (running on the server).  The postmaster and backend
have different roles but may be implemented by the same executable.

<Para>
A frontend sends a startup packet to the postmaster.  This includes the names
of the user and the database the user wants to connect to.  The postmaster then
uses this, and the information in the pg_hba.conf(5) file to determine what
further authentication information it requires the frontend to send (if any)
and responds to the frontend accordingly.

<Para>
The frontend then sends any required authentication information.  Once the
postmaster validates this it responds to the frontend that it is authenticated
and hands over the connection to a backend.  The backend then sends a message
indicating successful startup (normal case) or failure (for example, an
invalid database name).

<Para>
Subsequent communications are query and result packets exchanged between the
frontend and the backend.  The postmaster takes no further part in the
communication.

<Para>
When the frontend wishes to disconnect it sends an appropriate packet and
closes the connection without waiting for a response for the backend.

<Para>
Packets are sent as a data stream.  The first byte determines what should be
expected in the rest of the packet.  The exception is packets sent from a
frontend to the postmaster, which comprise a packet length then the packet
itself.  The difference is historical.

<Sect1>
<Title>Protocol</Title>

<Para>
This section describes the message flow.  There are four different types of
flows depending on the state of the connection:
startup, query, function call, and termination.
There are also special provisions for notification responses and command
cancellation, which can occur at any time after the startup phase.


<Sect2>
<Title>Startup</Title>

<Para>
Startup is divided into an authentication phase and a backend startup phase.

<Para>
Initially, the frontend sends a StartupPacket.  The postmaster uses this info
and the contents of the pg_hba.conf(5) file to determine what authentication
method the frontend must use.  The postmaster then responds with one of the
following messages:

<Para>
<VariableList>
<VarListEntry>
<Term>
	ErrorResponse
</Term>
<ListItem>
<Para>
		The postmaster then immediately closes the connection.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	AuthenticationOk
</Term>
<ListItem>
<Para>
		The postmaster then hands over to the backend.  The postmaster
		takes no further part in the communication.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	AuthenticationKerberosV4
</Term>
<ListItem>
<Para>
		The frontend must then take part in a Kerberos V4
		authentication dialog (not described here) with the postmaster.
		If this is successful, the postmaster responds with an
		AuthenticationOk, otherwise it responds with an ErrorResponse.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	AuthenticationKerberosV5
</Term>
<ListItem>
<Para>
		The frontend must then take part in a Kerberos V5
		authentication dialog (not described here) with the postmaster.
		If this is successful, the postmaster responds with an
		AuthenticationOk, otherwise it responds with an ErrorResponse.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	AuthenticationUnencryptedPassword
</Term>
<ListItem>
<Para>
		The frontend must then send an UnencryptedPasswordPacket.
		If this is the correct password, the postmaster responds with
		an AuthenticationOk, otherwise it responds with an
		ErrorResponse.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	AuthenticationEncryptedPassword
</Term>
<ListItem>
<Para>
		The frontend must then send an EncryptedPasswordPacket.
		If this is the correct password, the postmaster responds with
		an AuthenticationOk, otherwise it responds with an
		ErrorResponse.
</Para>
</ListItem>
</VarListEntry>
</VariableList>
</Para>

<Para>
If the frontend does not support the authentication method requested by the
postmaster, then it should immediately close the connection.

<Para>
After sending AuthenticationOk, the postmaster attempts to launch a backend
process.  Since this might fail, or the backend might encounter a failure
during startup, the frontend must wait for the backend to acknowledge
successful startup.  The frontend should send no messages at this point.
The possible messages from the backend during this phase are:

<Para>
<VariableList>
<VarListEntry>
<Term>
	ReadyForQuery
</Term>
<ListItem>
<Para>
		Backend startup is successful.  The frontend may now issue
		query or function call messages.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	ErrorResponse
</Term>
<ListItem>
<Para>
		Backend startup failed.  The connection is closed after
		sending this message.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	NoticeResponse
</Term>
<ListItem>
<Para>
		A warning message has been issued.  The frontend should
		display the message but continue listening for ReadyForQuery
		or ErrorResponse.
</Para>
</ListItem>
</VarListEntry>
</VariableList>
</Para>


<Sect2>
<Title>Query</Title>

<Para>
A Query cycle is initiated by the frontend sending a Query message to the
backend.  The backend then sends one or more response messages depending
on the contents of the query command string, and finally a ReadyForQuery
response message.  ReadyForQuery informs the frontend that it may safely
send a new query or function call.

<Para>
The possible response messages from the backend are:

<Para>
<VariableList>
<VarListEntry>
<Term>
	CompletedResponse
</Term>
<ListItem>
<Para>
		An SQL command completed normally.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	CopyInResponse
</Term>
<ListItem>
<Para>
		The backend is ready to copy data from the frontend to a
		relation.  The frontend should then send a CopyDataRows
		message.  The backend will then respond with a
		CompletedResponse message with a tag of "COPY".
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	CopyOutResponse
</Term>
<ListItem>
<Para>
		The backend is ready to copy data from a relation to the
		frontend.  It then sends a CopyDataRows message, and then a
		CompletedResponse message with a tag of "COPY".
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	CursorResponse
</Term>
<ListItem>
<Para>
		The query was either an insert(l), delete(l), update(l),
		fetch(l) or a select(l) command.
                If the transaction has been
                aborted then the backend sends a CompletedResponse message with
                a tag of "*ABORT STATE*".  Otherwise the following responses
                are sent.
</Para>
<Para>
		For an insert(l) command, the backend then sends a
		CompletedResponse message with a tag of "INSERT <Replaceable>oid</Replaceable> <Replaceable>rows</Replaceable>"
		where <Replaceable>rows</Replaceable> is the number of rows inserted, and <Replaceable>oid</Replaceable> is the
		object ID of the inserted row if <Replaceable>rows</Replaceable> is 1, otherwise <Replaceable>oid</Replaceable>
		is 0.
</Para>
<Para>
		For a delete(l) command, the backend then sends a
		CompletedResponse message with a tag of "DELETE <Replaceable>rows</Replaceable>" where
		<Replaceable>rows</Replaceable> is the number of rows deleted.
</Para>
<Para>
		For an update(l) command, the backend then sends a
		CompletedResponse message with a tag of "UPDATE <Replaceable>rows</Replaceable>" where
		<Replaceable>rows</Replaceable> is the number of rows deleted.
</Para>
<Para>
		For a fetch(l) or select(l) command, the backend sends a
		RowDescription message.  This is then followed by an AsciiRow
		or BinaryRow message (depending on whether a binary cursor was
		specified) for each row being returned to the frontend.
		Finally, the backend sends a CompletedResponse message with a
		tag of "SELECT".
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	EmptyQueryResponse
</Term>
<ListItem>
<Para>
		An empty query string was recognized.  (The need to specially
		distinguish this case is historical.)
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	ErrorResponse
</Term>
<ListItem>
<Para>
		An error has occurred.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	ReadyForQuery
</Term>
<ListItem>
<Para>
		Processing of the query string is complete.  A separate
		message is sent to indicate this because the query string
		may contain multiple SQL commands.  (CompletedResponse marks
		the end of processing one SQL command, not the whole string.)
		ReadyForQuery will always be sent, whether processing
		terminates successfully or with an error.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	NoticeResponse
</Term>
<ListItem>
<Para>
		A warning message has been issued in relation to the query.
		Notices are in addition to other responses, ie. the backend
		will continue processing the command.
</Para>
</ListItem>
</VarListEntry>
</VariableList>
</Para>

<Para>
A frontend must be prepared to accept ErrorResponse and NoticeResponse
messages whenever it is expecting any other type of message.  Also,
if it issues any listen(l) commands then it must be prepared to accept
NotificationResponse messages at any time; see below.


<Sect2>
<Title>Function Call</Title>

<Para>
A Function Call cycle is initiated by the frontend sending a FunctionCall
message to the backend.  The backend then sends one or more response messages
depending on the results of the function call, and finally a ReadyForQuery
response message.  ReadyForQuery informs the frontend that it may safely send
a new query or function call.

<Para>
The possible response messages from the backend are:

<Para>
<VariableList>
<VarListEntry>
<Term>
	ErrorResponse
</Term>
<ListItem>
<Para>
		An error has occurred.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	FunctionResultResponse
</Term>
<ListItem>
<Para>
		The function call was executed and returned a result.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	FunctionVoidResponse
</Term>
<ListItem>
<Para>
		The function call was executed and returned no result.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	ReadyForQuery
</Term>
<ListItem>
<Para>
		Processing of the function call is complete.
		ReadyForQuery will always be sent, whether processing
		terminates successfully or with an error.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	NoticeResponse
</Term>
<ListItem>
<Para>
		A warning message has been issued in relation to the function
		call.
		Notices are in addition to other responses, ie. the backend
		will continue processing the command.
</Para>
</ListItem>
</VarListEntry>
</VariableList>
</Para>

<Para>
A frontend must be prepared to accept ErrorResponse and NoticeResponse
messages whenever it is expecting any other type of message.  Also,
if it issues any listen(l) commands then it must be prepared to accept
NotificationResponse messages at any time; see below.


<Sect2>
<Title>Notification Responses</Title>

<Para>
If a frontend issues a listen(l) command, then the backend will send a
NotificationResponse message (not to be confused with NoticeResponse!)
whenever a notify(l) command is executed for the same relation name.

<Para>
Notification responses are permitted at any point in the protocol (after
startup), except within another backend message.  Thus, the frontend
must be prepared to recognize a NotificationResponse message whenever it is
expecting any message.  Indeed, it should be able to handle
NotificationResponse messages even when it is not engaged in a query.

<Para>
<VariableList>
<VarListEntry>
<Term>
	NotificationResponse
</Term>
<ListItem>
<Para>
		A notify(l) command has been executed for a relation for
		which a previous listen(l) command was executed.  Notifications
		may be sent at any time.
</Para>
</ListItem>
</VarListEntry>
</VariableList>
</Para>


<Sect2>
<Title>Cancelling Requests in Progress</Title>

<Para>
During the processing of a query, the frontend may request cancellation of the
query by sending a single byte of OOB (out-of-band) data.  The contents of the
data byte should be zero (although the backend does not currently check this).
If the cancellation is effective, it results in the current command being
terminated with an error message.  Note that the backend makes no specific
reply to the cancel request itself.  If the cancel request is ineffective
(say, because it arrived after processing was complete) then it will have
no visible effect at all.  Thus, the frontend must continue with its normal
processing of query cycle responses after issuing a cancel request.


<Sect2>
<Title>Termination</Title>

<Para>
The frontend sends a Terminate message and immediately closes the connection.
On receipt of the message, the backend immediately closes the connection and
terminates.


<Sect1>
<Title>Message Data Types</Title>

<Para>
This section describes the base data types used in messages.

<Para>
<VariableList>
<VarListEntry>
<Term>
	Int<Replaceable>n</Replaceable>(<Replaceable>i</Replaceable>)
</Term>
<ListItem>
<Para>
		An <Replaceable>n</Replaceable> bit integer in network byte order.
                If <Replaceable>i</Replaceable> is specified it
		is the literal value.  Eg. Int16, Int32(42).
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	LimString<Replaceable>n</Replaceable>(<Replaceable>s</Replaceable>)
</Term>
<ListItem>
<Para>
		A character array of exactly <Replaceable>n</Replaceable> bytes interpreted as a '\0'
		terminated string.  The '\0' is omitted if there is
		insufficient room.  If <Replaceable>s</Replaceable> is specified it is the literal value.
		Eg. LimString32, LimString64("user").
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String(<Replaceable>s</Replaceable>)
</Term>
<ListItem>
<Para>
		A conventional C '\0' terminated string with no length
		limitation.  A frontend should always read the full string
		even though it may have to discard characters if its buffers
		aren't big enough.
<Note>
<Para>
Is 8193 bytes the largest allowed size?
</Para>
</Note>
		If <Replaceable>s</Replaceable> is specified it is the literal value.
		Eg. String, String("user").
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte<Replaceable>n</Replaceable>(<Replaceable>c</Replaceable>)
</Term>
<ListItem>
<Para>
		Exactly <Replaceable>n</Replaceable> bytes.  If <Replaceable>c</Replaceable> is specified it is the literal
		value.  Eg. Byte, Byte1('\n').
</Para>
</ListItem>
</VarListEntry>
</VariableList>
</Para>

<Sect1>
<Title>Message Formats</Title>

<Para>
This section describes the detailed format of each message.  Each can be sent
by either a frontend (F), a postmaster/backend (B), or both (F & B).

<Para>

<VariableList>
<VarListEntry>
<Term>
AsciiRow (B)
</Term>
<ListItem>
<Para>
<VariableList>
<VarListEntry>
<Term>
	Byte1('D')
</Term>
<ListItem>
<Para>
		Identifies the message as an <Acronym>ASCII</Acronym> data row.
		(A prior RowDescription message defines the number of
		fields in the row and their data types.)
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte<Replaceable>n</Replaceable>
</Term>
<ListItem>
<Para>

                A bit map with one bit for each field in the row.  The 1st
                field corresponds to bit 7 of the 1st byte, the 2nd field
                corresponds to bit 6 of the 1st byte, the 8th field corresponds
                to bit 0 of the 1st byte, the 9th field corresponds to bit 8 of
                the 2nd byte, and so on.  The bit is set if the value of the
                corresponding field is not NULL.
</Para>
<Para>
	Then, for each field with a non-NULL value, there is the following:
<VariableList>
<VarListEntry>
<Term>
		Int32
</Term>
<ListItem>
<Para>
			Specifies the size of the value of the field, including
			this size.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
		Byte<Replaceable>n</Replaceable>
</Term>
<ListItem>
<Para>
			Specifies the value of the field itself in <Acronym>ASCII</Acronym>
			characters.  <Replaceable>n</Replaceable> is the above size minus 4.
</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
AuthenticationOk (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('R')
</Term>
<ListItem>
<Para>
		Identifies the message as an authentication request.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32(0)
</Term>
<ListItem>
<Para>
		Specifies that the authentication was successful.
</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
AuthenticationKerberosV4 (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('R')
</Term>
<ListItem>
<Para>
		Identifies the message as an authentication request.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32(1)
</Term>
<ListItem>
<Para>
		Specifies that Kerberos V4 authentication is required.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
AuthenticationKerberosV5 (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('R')
</Term>
<ListItem>
<Para>
		Identifies the message as an authentication request.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32(2)
</Term>
<ListItem>
<Para>
		Specifies that Kerberos V5 authentication is required.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
AuthenticationUnencryptedPassword (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('R')
</Term>
<ListItem>
<Para>
		Identifies the message as an authentication request.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32(3)
</Term>
<ListItem>
<Para>
		Specifies that an unencrypted password is required.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
AuthenticationEncryptedPassword (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('R')
</Term>
<ListItem>
<Para>
		Identifies the message as an authentication request.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32(4)
</Term>
<ListItem>
<Para>
		Specifies that an encrypted password is required.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte2
</Term>
<ListItem>
<Para>
		The salt to use when encrypting the password.
</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
BinaryRow (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('B')
</Term>
<ListItem>
<Para>
		Identifies the message as a binary data row.
		(A prior RowDescription message defines the number of
		fields in the row and their data types.)
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte<Replaceable>n</Replaceable>
</Term>
<ListItem>
<Para>
                A bit map with one bit for each field in the row.  The 1st
                field corresponds to bit 7 of the 1st byte, the 2nd field
                corresponds to bit 6 of the 1st byte, the 8th field corresponds
                to bit 0 of the 1st byte, the 9th field corresponds to bit 8 of
                the 2nd byte, and so on.  The bit is set if the value of the
                corresponding field is not NULL.
</Para>
<Para>
	Then, for each field with a non-NULL value, there is the following:
<VariableList>
<VarListEntry>
<Term>
		Int32
</Term>
<ListItem>
<Para>
			Specifies the size of the value of the field, excluding
			this size.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
		Byte<Replaceable>n</Replaceable>
</Term>
<ListItem>
<Para>
			Specifies the value of the field itself in binary
			format.  <Replaceable>n</Replaceable> is the above size.
</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
CompletedResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('C')
</Term>
<ListItem>
<Para>
		Identifies the message as a completed response.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The command tag.  This is usually (but not always) a single
		word that identifies which SQL command was completed.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
CopyDataRows (B & F)
</Term>
<ListItem>
<Para>
	This is a stream of rows where each row is terminated by a Byte1('\n').
	This is then followed by the sequence Byte1('\\'), Byte1('.'),
	Byte1('\n').
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
CopyInResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('G')
</Term>
<ListItem>
<Para>
		Identifies the message as a Start Copy In response.
		The frontend must now send a CopyDataRows message.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
CopyOutResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('H')
</Term>
<ListItem>
<Para>
		Identifies the message as a Start Copy Out response.
		This message will be followed by a CopyDataRows message.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
CursorResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('P')
</Term>
<ListItem>
<Para>
		Identifies the message as a cursor response.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The name of the cursor.  This will be "blank" if the cursor is
		implicit.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
EmptyQueryResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('I')
</Term>
<ListItem>
<Para>
		Identifies the message as a response to an empty query string.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String("")
</Term>
<ListItem>
<Para>
		Unused.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
EncryptedPasswordPacket (F)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Int32
</Term>
<ListItem>
<Para>
		The size of the packet in bytes.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The encrypted (using crypt()) password.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
ReadyForQuery (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('Z')
</Term>
<ListItem>
<Para>
		Identifies the message type.  ReadyForQuery is sent
		whenever the backend is ready for a new query cycle.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
ErrorResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('E')
</Term>
<ListItem>
<Para>
		Identifies the message as an error.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The error message itself.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
FunctionCall (F)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('F')
</Term>
<ListItem>
<Para>
		Identifies the message as a function call.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String("")
</Term>
<ListItem>
<Para>
		Unused.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32
</Term>
<ListItem>
<Para>
		Specifies the object ID of the function to call.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32
</Term>
<ListItem>
<Para>
		Specifies the number of arguments being supplied to the
		function.
</Para>
<Para>
	Then, for each argument, there is the following:
<VariableList>
<VarListEntry>
<Term>
		Int32
</Term>
<ListItem>
<Para>
			Specifies the size of the value of the argument,
			excluding this size.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
		Byte<Replaceable>n</Replaceable>
</Term>
<ListItem>
<Para>
			Specifies the value of the field itself in binary
			format.  <Replaceable>n</Replaceable> is the above size.
</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
</VariableList>

<Para>

</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
FunctionResultResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('V')
</Term>
<ListItem>
<Para>
		Identifies the message as a function call result.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte1('G')
</Term>
<ListItem>
<Para>
		Specifies that a nonempty result was returned.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32
</Term>
<ListItem>
<Para>
		Specifies the size of the value of the result, excluding this
		size.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte<Replaceable>n</Replaceable>
</Term>
<ListItem>
<Para>
		Specifies the value of the result itself in binary format.
		<Replaceable>n</Replaceable> is the above size.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte1('0')
</Term>
<ListItem>
<Para>
		Unused.  (Strictly speaking, FunctionResultResponse and
		FunctionVoidResponse are the same thing but with some optional
		parts to the message.)
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
FunctionVoidResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('V')
</Term>
<ListItem>
<Para>
		Identifies the message as a function call result.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Byte1('0')
</Term>
<ListItem>
<Para>
		Specifies that an empty result was returned.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
NoticeResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('N')
</Term>
<ListItem>
<Para>
		Identifies the message as a notice.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The notice message itself.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
NotificationResponse (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('A')
</Term>
<ListItem>
<Para>
		Identifies the message as a notification response.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32
</Term>
<ListItem>
<Para>
		The process ID of the backend process.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The name of the relation that the notify has been raised on.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
Query (F)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('Q')
</Term>
<ListItem>
<Para>
		Identifies the message as a query.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The query string itself.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
RowDescription (B)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('T')
</Term>
<ListItem>
<Para>
		Identifies the message as a row description.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int16
</Term>
<ListItem>
<Para>
		Specifies the number of fields in a row (and may be zero).
</Para>
<Para>
	Then, for each field, there is the following:
<VariableList>
<VarListEntry>
<Term>
		String
</Term>
<ListItem>
<Para>
			Specifies the field name.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
		Int32
</Term>
<ListItem>
<Para>
			Specifies the object ID of the field type.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
		Int16
</Term>
<ListItem>
<Para>
			Specifies the type size.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
		Int16
</Term>
<ListItem>
<Para>
			Specifies the type modifier.
</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
StartupPacket (F)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Int32(296)
</Term>
<ListItem>
<Para>
		The size of the packet in bytes.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	Int32
</Term>
<ListItem>
<Para>
		The protocol version number.  The most significant 16 bits are
		the major version number.  The least 16 significant bits are
		the minor version number.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	LimString64
</Term>
<ListItem>
<Para>
		The database name, defaults to the user name if omitted.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	LimString32
</Term>
<ListItem>
<Para>
		The user name.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	LimString64
</Term>
<ListItem>
<Para>
		Any additional command line arguments to be passed to the
		backend by the postmaster.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	LimString64
</Term>
<ListItem>
<Para>
		Unused.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	LimString64
</Term>
<ListItem>
<Para>
		The optional tty the backend should use for debugging messages.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
Terminate (F)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Byte1('X')
</Term>
<ListItem>
<Para>
		Identifies the message as a termination.
</Para>
</ListItem>
</VarListEntry>
</VariableList>


</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
UnencryptedPasswordPacket (F)
</Term>
<ListItem>
<Para>

<VariableList>
<VarListEntry>
<Term>
	Int32
</Term>
<ListItem>
<Para>
		The size of the packet in bytes.
</Para>
</ListItem>
</VarListEntry>
<VarListEntry>
<Term>
	String
</Term>
<ListItem>
<Para>
		The unencrypted password.
</Para>
</ListItem>
</VarListEntry>
</VariableList>

</Para>
</ListItem>
</VarListEntry>
</VariableList>
</Para>

</Chapter>
