<!--
$Header: /cvsroot/pgsql/doc/src/sgml/backup.sgml,v 2.29 2003/08/17 22:05:13 tgl Exp $
-->
<chapter id="backup">
 <title>Backup and Restore</title>

 <indexterm zone="backup"><primary>backup</></>

 <para>
  As everything that contains valuable data, <productname>PostgreSQL</>
  databases should be backed up regularly. While the procedure is
  essentially simple, it is important to have a basic understanding of
  the underlying techniques and assumptions.
 </para>

 <para>
  There are two fundamentally different approaches to backing up
  <productname>PostgreSQL</> data:
  <itemizedlist>
   <listitem><para><acronym>SQL</> dump</para></listitem>
   <listitem><para>File system level backup</para></listitem>
  </itemizedlist>
 </para>

 <sect1 id="backup-dump">
  <title><acronym>SQL</> Dump</title>

  <para>
   The idea behind the SQL-dump method is to generate a text file with SQL
   commands that, when fed back to the server, will recreate the
   database in the same state as it was at the time of the dump.
   <productname>PostgreSQL</> provides the utility program
   <application>pg_dump</> for this purpose. The basic usage of this
   command is:
<synopsis>
pg_dump <replaceable class="parameter">dbname</replaceable> &gt; <replaceable class="parameter">outfile</replaceable>
</synopsis>
   As you see, <application>pg_dump</> writes its results to the
   standard output. We will see below how this can be useful.
  </para>

  <para>
   <application>pg_dump</> is a regular <productname>PostgreSQL</>
   client application (albeit a particularly clever one). This means
   that you can do this backup procedure from any remote host that has
   access to the database. But remember that <application>pg_dump</>
   does not operate with special permissions. In particular, you must
   have read access to all tables that you want to back up, so in
   practice you almost always have to be a database superuser.
  </para>

  <para>
   To specify which database server <application>pg_dump</> should
   contact, use the command line options <option>-h
   <replaceable>host</></> and <option>-p <replaceable>port</></>. The
   default host is the local host or whatever your
   <envar>PGHOST</envar> environment variable specifies. Similarly,
   the default port is indicated by the <envar>PGPORT</envar>
   environment variable or, failing that, by the compiled-in default.
   (Conveniently, the server will normally have the same compiled-in
   default.)
  </para>

  <para>
   As any other <productname>PostgreSQL</> client application,
   <application>pg_dump</> will by default connect with the database
   user name that is equal to the current operating system user name. To override
   this, either specify the <option>-U</option> option or set the
   environment variable <envar>PGUSER</envar>. Remember that
   <application>pg_dump</> connections are subject to the normal
   client authentication mechanisms (which are described in <xref
   linkend="client-authentication">).
  </para>

  <para>
   Dumps created by <application>pg_dump</> are internally consistent,
   that is, updates to the database while <application>pg_dump</> is
   running will not be in the dump. <application>pg_dump</> does not
   block other operations on the database while it is working.
   (Exceptions are those operations that need to operate with an
   exclusive lock, such as <command>VACUUM FULL</command>.)
  </para>

  <important>
   <para>
    When your database schema relies on OIDs (for instance as foreign
    keys) you must instruct <application>pg_dump</> to dump the OIDs
    as well. To do this, use the <option>-o</option> command line
    option.  <quote>Large objects</> are not dumped by default, either.
    See <application>pg_dump</>'s command reference page if you use
    large objects.
   </para>
  </important>

  <sect2 id="backup-dump-restore">
   <title>Restoring the dump</title>

   <para>
    The text files created by <application>pg_dump</> are intended to
    be read in by the <application>psql</application> program. The
    general command form to restore a dump is
<synopsis>
psql <replaceable class="parameter">dbname</replaceable> &lt; <replaceable class="parameter">infile</replaceable>
</synopsis>
    where <replaceable class="parameter">infile</replaceable> is what
    you used as <replaceable class="parameter">outfile</replaceable>
    for the <command>pg_dump</> command. The database <replaceable
    class="parameter">dbname</replaceable> will not be created by this
    command, you must create it yourself from <literal>template0</> before executing
    <application>psql</> (e.g., with <literal>createdb -T template0
    <replaceable class="parameter">dbname</></literal>).
    <application>psql</> supports similar options to <application>pg_dump</> 
    for controlling the database server location and the user name. See
    its reference page for more information.
   </para>

   <para>
    If the objects in the original database were owned by different
    users, then the dump will instruct <application>psql</> to connect
    as each affected user in turn and then create the relevant
    objects. This way the original ownership is preserved. This also
    means, however, that all these users must already exist, and
    furthermore that you must be allowed to connect as each of them.
    It might therefore be necessary to temporarily relax the client
    authentication settings.
   </para>

   <para>
    Once restored, it is wise to run <command>ANALYZE</> on each
    database so the optimizer has useful statistics. You
    can also run <command>vacuumdb -a -z</> to <command>ANALYZE</> all
    databases.
   </para>

   <para>
    The ability of <application>pg_dump</> and <application>psql</> to
    write to or read from pipes makes it possible to dump a database
    directly from one server to another; for example:
<programlisting>
pg_dump -h <replaceable>host1</> <replaceable>dbname</> | psql -h <replaceable>host2</> <replaceable>dbname</>
</programlisting>
   </para>

   <important>
    <para>
     The dumps produced by <application>pg_dump</> are relative to
     <literal>template0</>. This means that any languages, procedures,
     etc. added to <literal>template1</> will also be dumped by
     <application>pg_dump</>. As a result, when restoring, if you are
     using a customized <literal>template1</>, you must create the
     empty database from <literal>template0</>, as in the example
     above.
    </para>
   </important>

   <tip>
    <para>
    Restore performance can be improved by increasing <literal>SORT_MEM</>
    (see <xref linkend="runtime-config-resource-memory">).
    </para>
   </tip>
  </sect2>

  <sect2 id="backup-dump-all">
   <title>Using <command>pg_dumpall</></title>

   <para>
    The above mechanism is cumbersome and inappropriate when backing
    up an entire database cluster. For this reason the
    <application>pg_dumpall</> program is provided.
    <application>pg_dumpall</> backs up each database in a given
    cluster, and also preserves cluster-wide data such as
    users and groups. The call sequence for
    <application>pg_dumpall</> is simply
<synopsis>
pg_dumpall &gt; <replaceable>outfile</>
</synopsis>
    The resulting dump can be restored with <application>psql</>:
<synopsis>
psql template1 &lt; <replaceable class="parameter">infile</replaceable>
</synopsis>
    (Actually, you can specify any existing database name to start from,
    but if you are reloading in an empty cluster then <literal>template1</>
    is the only available choice.)  It is always necessary to have
    database superuser access when restoring a <application>pg_dumpall</>
    dump, as that is required to restore the user and group information.
   </para>
  </sect2>

  <sect2 id="backup-dump-large">
   <title>Large Databases</title>

   <para>
    Since <productname>PostgreSQL</productname> allows tables larger
    than the maximum file size on your system, it can be problematic
    to dump such a table to a file, since the resulting file will likely
    be larger than the maximum size allowed by your system. As
    <application>pg_dump</> can write to the standard output, you can
    just use standard Unix tools to work around this possible problem.
   </para>

   <formalpara>
    <title>Use compressed dumps.</title>
    <para>
     You can use your favorite compression program, for example
     <application>gzip</application>.

<programlisting>
pg_dump <replaceable class="parameter">dbname</replaceable> | gzip &gt; <replaceable class="parameter">filename</replaceable>.gz
</programlisting>

     Reload with

<programlisting>
createdb <replaceable class="parameter">dbname</replaceable>
gunzip -c <replaceable class="parameter">filename</replaceable>.gz | psql <replaceable class="parameter">dbname</replaceable>
</programlisting>

     or

<programlisting>
cat <replaceable class="parameter">filename</replaceable>.gz | gunzip | psql <replaceable class="parameter">dbname</replaceable>
</programlisting>
    </para>
   </formalpara>

   <formalpara>
    <title>Use <command>split</>.</title>
    <para>
     The <command>split</command> command
     allows you to split the output into pieces that are
     acceptable in size to the underlying file system. For example, to
     make chunks of 1 megabyte:

<programlisting>
pg_dump <replaceable class="parameter">dbname</replaceable> | split -b 1m - <replaceable class="parameter">filename</replaceable>
</programlisting>

     Reload with

<programlisting>
createdb <replaceable class="parameter">dbname</replaceable>
cat <replaceable class="parameter">filename</replaceable>* | psql <replaceable class="parameter">dbname</replaceable>
</programlisting>
    </para>
   </formalpara>

   <formalpara>
    <title>Use the custom dump format.</title>
    <para>
     If <productname>PostgreSQL</productname> was built on a system with the <application>zlib</> compression library
     installed, the custom dump format will compress data as it writes it
     to the output file. For large databases, this will produce similar dump
     sizes to using <command>gzip</command>, but has the added advantage that the tables can be
     restored selectively. The following command dumps a database using the
     custom dump format:

<programlisting>
pg_dump -Fc <replaceable class="parameter">dbname</replaceable> > <replaceable class="parameter">filename</replaceable>
</programlisting>

     See the <application>pg_dump</> and <application>pg_restore</> reference pages for details.
    </para>
   </formalpara>

  </sect2>

  <sect2 id="backup-dump-caveats">
   <title>Caveats</title>

   <para>
    <application>pg_dump</> (and by implication
    <application>pg_dumpall</>) has a few limitations which stem from
    the difficulty of reconstructing certain information from the system
    catalogs.
   </para>

   <para>
    Specifically, the order in which <application>pg_dump</> writes
    the objects is not very sophisticated. This can lead to problems
    for example when functions are used as column default values. The
    only answer is to manually reorder the dump. If you created
    circular dependencies in your schema then you will have more work
    to do.
   </para>

   <para>
    For reasons of backward compatibility, <application>pg_dump</> does
    not dump large objects by default. To dump large objects you must use 
    either the custom or the TAR output format, and use the <option>-b</> option in 
    <application>pg_dump</>. See the reference pages for details.
    The directory <filename>contrib/pg_dumplo</> of the
    <productname>PostgreSQL</> source tree also contains a program that can
    dump large objects.
   </para>

   <para>
    Please familiarize yourself with the
    <citerefentry><refentrytitle>pg_dump</></> reference page.
   </para>
  </sect2>
 </sect1>

 <sect1 id="backup-file">
  <title>File system level backup</title>

  <para>
   An alternative backup strategy is to directly copy the files that
   <productname>PostgreSQL</> uses to store the data in the database. In
   <xref linkend="creating-cluster"> it is explained where these files
   are located, but you have probably found them already if you are
   interested in this method. You can use whatever method you prefer
   for doing usual file system backups, for example

<programlisting>
tar -cf backup.tar /usr/local/pgsql/data
</programlisting>
  </para>

  <para>
   There are two restrictions, however, which make this method
   impractical, or at least inferior to the <application>pg_dump</>
   method:

   <orderedlist>
    <listitem>
     <para>
      The database server <emphasis>must</> be shut down in order to
      get a usable backup. Half-way measures such as disallowing all
      connections will not work as there is always some buffering
      going on. For this reason it is also not advisable to trust file
      systems that claim to support <quote>consistent
      snapshots</quote>. Information about stopping the server can be
      found in <xref linkend="postmaster-shutdown">.
     </para>

     <para>
      Needless to say that you also need to shut down the server
      before restoring the data.
     </para>
    </listitem>

    <listitem>
     <para>
      If you have dug into the details of the file system layout of the data you
      may be tempted to try to back up or restore only certain
      individual tables or databases from their respective files or
      directories. This will <emphasis>not</> work because the
      information contained in these files contains only half the
      truth. The other half is in the commit log files
      <filename>pg_clog/*</filename>, which contain the commit status of
      all transactions. A table file is only usable with this
      information. Of course it is also impossible to restore only a
      table and the associated <filename>pg_clog</filename> data
      because that would render all other tables in the database
      cluster useless.
     </para>
    </listitem>
   </orderedlist>
  </para>

  <para>
   Also note that the file system backup will not necessarily be
   smaller than an SQL dump. On the contrary, it will most likely be
   larger. (<application>pg_dump</application> does not need to dump
   the contents of indexes for example, just the commands to recreate
   them.)
  </para>

 </sect1>

 <sect1 id="migration">
  <title>Migration between releases</title>
  <indexterm zone="migration"><primary>upgrading</></>

  <para>
   As a general rule, the internal data storage format is subject to
   change between releases of <productname>PostgreSQL</>. This does not
   apply to different <quote>patch levels</quote>, these always have
   compatible storage formats. For example, releases 7.0.1, 7.1.2, and
   7.2 are not compatible, whereas 7.1.1 and 7.1.2 are. When you
   update between compatible versions, then you can simply reuse the
   data area in disk by the new executables. Otherwise you need to
   <quote>back up</> your data and <quote>restore</> it on the new
   server, using <application>pg_dump</>. (There are checks in place
   that prevent you from doing the wrong thing, so no harm can be done
   by confusing these things.) The precise installation procedure is
   not subject of this section; these details are in <xref linkend="installation">.
  </para>

  <para>
   The least downtime can be achieved by installing the new server in
   a different directory and running both the old and the new servers
   in parallel, on different ports. Then you can use something like

<programlisting>
pg_dumpall -p 5432 | psql -d template1 -p 6543
</programlisting>

   to transfer your data.  Or use an intermediate file if you want.
   Then you can shut down the old server and start the new server at
   the port the old one was running at. You should make sure that the
   database is not updated after you run <application>pg_dumpall</>,
   otherwise you will obviously lose that data. See <xref
   linkend="client-authentication"> for information on how to prohibit
   access. In practice you probably want to test your client
   applications on the new setup before switching over.
  </para>

  <para>
   If you cannot or do not want to run two servers in parallel you can
   do the back up step before installing the new version, bring down
   the server, move the old version out of the way, install the new
   version, start the new server, restore the data. For example:

<programlisting>
pg_dumpall > backup
pg_ctl stop
mv /usr/local/pgsql /usr/local/pgsql.old
cd ~/postgresql-&version;
gmake install
initdb -D /usr/local/pgsql/data
postmaster -D /usr/local/pgsql/data
psql template1 < backup
</programlisting>

   See <xref linkend="runtime"> about ways to start and stop the
   server and other details. The installation instructions will advise
   you of strategic places to perform these steps.
  </para>

  <note>
   <para>
    When you <quote>move the old installation out of the way</quote>
    it is no longer perfectly usable. Some parts of the installation
    contain information about where the other parts are located. This
    is usually not a big problem but if you plan on using two
    installations in parallel for a while you should assign them
    different installation directories at build time.
   </para>
  </note>
 </sect1>
</chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode:sgml
sgml-omittag:nil
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:1
sgml-indent-tabs-mode:nil
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:"./reference.ced"
sgml-exposed-tags:nil
sgml-local-catalogs:("/usr/share/sgml/catalog")
sgml-local-ecat-files:nil
End:
-->
